Re: [PATCH v6 3/4] tracing: Add trace_irqsoff tracepoints

[Thomas Gleixner <tglx@linutronix.de>]

On Wed, 7 Sep 2016, Binoy Jayan wrote:
> This captures only the latencies introduced by disabled irqs and
> preemption. Additional per process data has to be captured to calculate
> the effective latencies introduced for individual processes.

And what is the additional per process data and how is it captured and
used?

>  static DEFINE_PER_CPU(int, tracing_cpu);
> +static DEFINE_PER_CPU(cycle_t, lat_ts[LT_MAX]);
>  
>  static DEFINE_RAW_SPINLOCK(max_trace_lock);
>  
> @@ -419,9 +425,23 @@ stop_critical_timing(unsigned long ip, unsigned long parent_ip)
>  	atomic_dec(&data->disabled);
>  }
>  
> +static inline void latency_preempt_timing_start(enum latency_type ltype)
> +{
> +	this_cpu_write(lat_ts[ltype], (cycle_t) trace_clock_local());

What is this silly type cast for? Why can't you just use u64 ?

> +}
> +
> +static inline void latency_preempt_timing_stop(enum latency_type type)
> +{
> +	trace_latency_preempt(type,
> +		(cycle_t) trace_clock_local() - this_cpu_read(lat_ts[type]));

And then of course you use a completely different data type in the trace
itself.

> +DECLARE_EVENT_CLASS(latency_template,
> +	TP_PROTO(int ltype, cycles_t latency),

Are you sure, that you know what you are doing here? If yes, then please
explain it in form of comments so mere mortals can understand it as well.

>  /* start and stop critical timings used to for stoppage (in idle) */
>  void start_critical_timings(void)
>  {
> +	if (unlikely(trace_latency_preempt_enabled()))
> +		latency_preempt_timing_start(LT_CRITTIME);

I doubt, that this conditional is less expensive than a simple
unconditional store to a per cpu variable.

> +
>  	if (preempt_trace() || irq_trace())
>  		start_critical_timing(CALLER_ADDR0, CALLER_ADDR1);
>  }
> @@ -431,6 +451,9 @@ void stop_critical_timings(void)
>  {
>  	if (preempt_trace() || irq_trace())
>  		stop_critical_timing(CALLER_ADDR0, CALLER_ADDR1);
> +
> +	if (unlikely(trace_latency_preempt_enabled()))
> +		latency_preempt_timing_stop(LT_CRITTIME);

And this is silly as well. You can put the whole evaluation into the trace
event assignement so the tracer core will handle that conditional.

Aside of that it is silly to evaluate trace_clock_local() for the actual
tracepoint simply because that time is already stored in the tracepoint
itself. The flow here is:

	event = trace_event_buffer_lock_reserve();
	entry = ring_buffer_event_data(event);
       	{ <assign>; }  <-- Here we assign the entries by the __field and
                           __array macros.


So you should talk to Steven about having a way to retrieve that time from
entry itself in a generic way.

Thanks,

	tglx