All of lore.kernel.org
 help / color / mirror / Atom feed
From: Patrice CHOTARD <patrice.chotard@foss.st.com>
To: Patrick Delaunay <patrick.delaunay@foss.st.com>, <u-boot@lists.denx.de>
Cc: Tom Rini <trini@konsulko.com>,
	U-Boot STM32 <uboot-stm32@st-md-mailman.stormreply.com>
Subject: Re: [PATCH 05/16] arm: stm32mp: add choice for STM32MP SOC family
Date: Fri, 20 May 2022 08:37:58 +0200	[thread overview]
Message-ID: <b56b3279-5de6-2a79-fc98-fac57d071523@foss.st.com> (raw)
In-Reply-To: <20220506160540.5.Id34b18d3ce5c7d33defb18c3c6e545f22190372d@changeid>

HI Patrick

On 5/6/22 16:06, Patrick Delaunay wrote:
> Add mandatory choice for SOC support in ARCH_STM32MP.
> 
> This patch is a preliminary step for new SOC introduction
> in STM32MP family.
> 
> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
> ---
> 
>  arch/arm/mach-stm32mp/Kconfig       | 23 +++++++++++++----------
>  configs/stm32mp15_basic_defconfig   |  4 ++--
>  configs/stm32mp15_defconfig         |  4 ++--
>  configs/stm32mp15_trusted_defconfig |  4 ++--
>  4 files changed, 19 insertions(+), 16 deletions(-)
> 
> diff --git a/arch/arm/mach-stm32mp/Kconfig b/arch/arm/mach-stm32mp/Kconfig
> index be0d74b4ac..446d3258c9 100644
> --- a/arch/arm/mach-stm32mp/Kconfig
> +++ b/arch/arm/mach-stm32mp/Kconfig
> @@ -33,6 +33,10 @@ config SYS_MALLOC_LEN
>  config ENV_SIZE
>  	default 0x2000
>  
> +choice
> +	prompt "Select STMicroelectronics STM32MPxxx Soc"
> +	default STM32MP15x
> +
>  config STM32MP15x
>  	bool "Support STMicroelectronics STM32MP15x Soc"
>  	select ARCH_SUPPORT_PSCI
> @@ -54,11 +58,13 @@ config STM32MP15x
>  		STM32MP157, STM32MP153 or STM32MP151
>  		STMicroelectronics MPU with core ARMv7
>  		dual core A7 for STM32MP157/3, monocore for STM32MP151
> -		target all the STMicroelectronics board with SOC STM32MP1 family
> +endchoice
> +
> +if STM32MP15x
>  
>  config STM32MP15x_STM32IMAGE
>  	bool "Support STM32 image for generated U-Boot image"
> -	depends on STM32MP15x && TFABOOT
> +	depends on TFABOOT
>  	help
>  		Support of STM32 image generation for SOC STM32MP15x
>  		for TF-A boot when FIP container is not used
> @@ -69,7 +75,6 @@ choice
>  
>  config TARGET_ST_STM32MP15x
>  	bool "STMicroelectronics STM32MP15x boards"
> -	select STM32MP15x
>  	imply BOOTSTAGE
>  	imply CMD_BOOTSTAGE
>  	imply CMD_CLS if CMD_BMP
> @@ -84,7 +89,6 @@ config TARGET_ST_STM32MP15x
>  
>  config TARGET_MICROGEA_STM32MP1
>  	bool "Engicam MicroGEA STM32MP1 SOM"
> -	select STM32MP15x
>  	imply BOOTSTAGE
>  	imply CMD_BOOTSTAGE
>  	imply CMD_CLS if CMD_BMP
> @@ -109,7 +113,6 @@ config TARGET_MICROGEA_STM32MP1
>  
>  config TARGET_ICORE_STM32MP1
>  	bool "Engicam i.Core STM32MP1 SOM"
> -	select STM32MP15x
>  	imply BOOTSTAGE
>  	imply CMD_BOOTSTAGE
>  	imply CMD_CLS if CMD_BMP
> @@ -131,12 +134,16 @@ config TARGET_ICORE_STM32MP1
>  
>  config TARGET_DH_STM32MP1_PDK2
>  	bool "DH STM32MP1 PDK2"
> -	select STM32MP15x
>  	help
>  		Target the DH PDK2 development kit with STM32MP15x SoM.
>  
>  endchoice
>  
> +source "board/st/stm32mp1/Kconfig"
> +source "board/dhelectronics/dh_stm32mp1/Kconfig"
> +source "board/engicam/stm32mp1/Kconfig"
> +endif
> +
>  config SYS_TEXT_BASE
>  	default 0xC0100000
>  
> @@ -221,8 +228,4 @@ config DEBUG_UART_CLOCK
>  endif
>  
>  source "arch/arm/mach-stm32mp/cmd_stm32prog/Kconfig"
> -source "board/dhelectronics/dh_stm32mp1/Kconfig"
> -source "board/engicam/stm32mp1/Kconfig"
> -source "board/st/stm32mp1/Kconfig"
> -
>  endif
> diff --git a/configs/stm32mp15_basic_defconfig b/configs/stm32mp15_basic_defconfig
> index 5d1b2e0fd7..46b1cee5e7 100644
> --- a/configs/stm32mp15_basic_defconfig
> +++ b/configs/stm32mp15_basic_defconfig
> @@ -9,10 +9,10 @@ CONFIG_SPL_TEXT_BASE=0x2FFC2500
>  CONFIG_SPL_MMC=y
>  CONFIG_SPL=y
>  CONFIG_TARGET_ST_STM32MP15x=y
> +CONFIG_TYPEC_STUSB160X=y
> +CONFIG_ENV_OFFSET_REDUND=0x2C0000
>  CONFIG_CMD_STM32KEY=y
>  CONFIG_CMD_STM32PROG=y
> -CONFIG_ENV_OFFSET_REDUND=0x2C0000
> -CONFIG_TYPEC_STUSB160X=y
>  CONFIG_SPL_SPI_FLASH_SUPPORT=y
>  CONFIG_SPL_SPI=y
>  # CONFIG_ARMV7_VIRT is not set
> diff --git a/configs/stm32mp15_defconfig b/configs/stm32mp15_defconfig
> index f6e7fc81b0..8bb8e4624d 100644
> --- a/configs/stm32mp15_defconfig
> +++ b/configs/stm32mp15_defconfig
> @@ -6,11 +6,11 @@ CONFIG_ENV_OFFSET=0x480000
>  CONFIG_ENV_SECT_SIZE=0x40000
>  CONFIG_DEFAULT_DEVICE_TREE="stm32mp157c-ev1"
>  CONFIG_TARGET_ST_STM32MP15x=y
> +CONFIG_TYPEC_STUSB160X=y
> +CONFIG_ENV_OFFSET_REDUND=0x4C0000
>  CONFIG_DDR_CACHEABLE_SIZE=0x10000000
>  CONFIG_CMD_STM32KEY=y
>  CONFIG_CMD_STM32PROG=y
> -CONFIG_ENV_OFFSET_REDUND=0x4C0000
> -CONFIG_TYPEC_STUSB160X=y
>  # CONFIG_ARMV7_NONSEC is not set
>  CONFIG_SYS_LOAD_ADDR=0xc2000000
>  CONFIG_SYS_MEMTEST_START=0xc0000000
> diff --git a/configs/stm32mp15_trusted_defconfig b/configs/stm32mp15_trusted_defconfig
> index 855a394893..4f73930924 100644
> --- a/configs/stm32mp15_trusted_defconfig
> +++ b/configs/stm32mp15_trusted_defconfig
> @@ -7,11 +7,11 @@ CONFIG_ENV_SECT_SIZE=0x40000
>  CONFIG_DEFAULT_DEVICE_TREE="stm32mp157c-ev1"
>  CONFIG_STM32MP15x_STM32IMAGE=y
>  CONFIG_TARGET_ST_STM32MP15x=y
> +CONFIG_TYPEC_STUSB160X=y
> +CONFIG_ENV_OFFSET_REDUND=0x2C0000
>  CONFIG_DDR_CACHEABLE_SIZE=0x10000000
>  CONFIG_CMD_STM32KEY=y
>  CONFIG_CMD_STM32PROG=y
> -CONFIG_ENV_OFFSET_REDUND=0x2C0000
> -CONFIG_TYPEC_STUSB160X=y
>  # CONFIG_ARMV7_NONSEC is not set
>  CONFIG_SYS_LOAD_ADDR=0xc2000000
>  CONFIG_SYS_MEMTEST_START=0xc0000000
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>

Thanks
Patrice

  reply	other threads:[~2022-05-20  6:38 UTC|newest]

Thread overview: 55+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-05-06 14:06 [PATCH 00/16] stm32mp: add STM32MP13x support Patrick Delaunay
2022-05-06 14:06 ` [PATCH 01/16] ARM: dts: stm32: add STM32MP13 SoCs support Patrick Delaunay
2022-05-20  6:31   ` Patrice CHOTARD
2022-06-17  8:47   ` Patrick DELAUNAY
2022-05-06 14:06 ` [PATCH 02/16] configs: stm32mp1: move SUPPORT_SPL in STM32MP15x Patrick Delaunay
2022-05-20  6:32   ` Patrice CHOTARD
2022-06-17  8:47   ` Patrick DELAUNAY
2022-05-06 14:06 ` [PATCH 03/16] arm: stm32mp: move the get_otp helper function in bsec Patrick Delaunay
2022-05-20  6:32   ` Patrice CHOTARD
2022-06-17  8:47   ` Patrick DELAUNAY
2022-05-06 14:06 ` [PATCH 04/16] arm: stm32mp: move code for STM32MP15x Patrick Delaunay
2022-05-20  6:32   ` Patrice CHOTARD
2022-06-17  8:48   ` Patrick DELAUNAY
2022-05-06 14:06 ` [PATCH 05/16] arm: stm32mp: add choice for STM32MP SOC family Patrick Delaunay
2022-05-20  6:37   ` Patrice CHOTARD [this message]
2022-06-17  8:48   ` Patrick DELAUNAY
2022-05-06 14:06 ` [PATCH 06/16] arm: stm32mp: add sub config Kconfig.15x Patrick Delaunay
2022-05-20  6:39   ` Patrice CHOTARD
2022-06-17  8:49   ` Patrick DELAUNAY
2022-05-06 14:06 ` [PATCH 07/16] arm: stm32mp: add CONFIG_STM32MP15_PWR Patrick Delaunay
2022-05-20  6:41   ` Patrice CHOTARD
2022-06-17  8:49   ` Patrick DELAUNAY
2022-05-06 14:06 ` [PATCH 08/16] arm: stm32mp: add support of STM32MP13x Patrick Delaunay
2022-05-20  6:49   ` Patrice CHOTARD
2022-05-20  7:24     ` [Uboot-stm32] " Patrice CHOTARD
2022-05-20  7:44       ` Marek Vasut
2022-06-17  8:57   ` Patrick DELAUNAY
2022-05-06 14:06 ` [PATCH 09/16] arm: stm32mp: support 2 MAC address for STM32MP13 Patrick Delaunay
2022-05-20  6:55   ` Patrice CHOTARD
2022-06-17  8:57   ` Patrick DELAUNAY
2022-05-06 14:06 ` [PATCH 10/16] pinctrl: stm32: add support of STM32MP135 Patrick Delaunay
2022-05-20  6:55   ` Patrice CHOTARD
2022-05-20  6:57   ` Patrice CHOTARD
2022-06-17  8:57   ` Patrick DELAUNAY
2022-05-06 14:06 ` [PATCH 11/16] board: stm32pm1: add stm32mp13 board support Patrick Delaunay
2022-05-20  7:02   ` Patrice CHOTARD
2022-05-20 15:33     ` Patrick DELAUNAY
2022-06-17  9:00   ` Patrick DELAUNAY
2022-05-06 14:06 ` [PATCH 12/16] ram: stm32mp1: add support of STM32MP13x Patrick Delaunay
2022-05-20  7:09   ` Patrice CHOTARD
2022-06-17  9:01   ` Patrick DELAUNAY
2022-05-06 14:06 ` [PATCH 13/16] mmc: stm32_sdmmc2: make reset property optional Patrick Delaunay
2022-05-16 23:34   ` Jaehoon Chung
2022-05-20  7:10   ` Patrice CHOTARD
2022-06-17  9:01   ` Patrick DELAUNAY
2022-05-06 14:06 ` [PATCH 14/16] arm: dts: stm32mp: add stm32mp13 device tree for U-Boot Patrick Delaunay
2022-05-20  7:10   ` Patrice CHOTARD
2022-06-17  9:01   ` Patrick DELAUNAY
2022-05-06 14:06 ` [PATCH 15/16] configs: add stm32mp13 defconfig Patrick Delaunay
2022-05-20  7:10   ` Patrice CHOTARD
2022-06-17  9:04   ` Patrick DELAUNAY
2022-05-06 14:06 ` [PATCH 16/16] doc: st: stm32mp1: add STM32MP13x support Patrick Delaunay
2022-05-20  7:21   ` Patrice CHOTARD
2022-05-20 16:13     ` Patrick DELAUNAY
2022-06-17  9:05   ` Patrick DELAUNAY

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=b56b3279-5de6-2a79-fc98-fac57d071523@foss.st.com \
    --to=patrice.chotard@foss.st.com \
    --cc=patrick.delaunay@foss.st.com \
    --cc=trini@konsulko.com \
    --cc=u-boot@lists.denx.de \
    --cc=uboot-stm32@st-md-mailman.stormreply.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.