All of lore.kernel.org
 help / color / mirror / Atom feed
From: "\"Stéphane Viau\"" <sviau@codeaurora.org>
To: Rajendra Nayak <rnayak@codeaurora.org>
Cc: Stephane Viau <sviau@codeaurora.org>,
	linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH] clk: qcom: gdsc: Add GDSCs in apq8084 MMCC
Date: Thu, 26 Mar 2015 09:43:36 -0500	[thread overview]
Message-ID: <b9a3cb42e6fbfcbb4b0c57a8ce4c8c85.squirrel@www.codeaurora.org> (raw)
In-Reply-To: <5513CDAC.8050902@codeaurora.org>


>
> On 03/25/2015 06:49 PM, Stephane Viau wrote:
>> Add the GDSC instances that exist as part of apq8084 MMCC block.
>>
>> Signed-off-by: Stephane Viau <sviau@codeaurora.org>
>> ---
>>   drivers/clk/qcom/Kconfig                      |  1 +
>>   drivers/clk/qcom/mmcc-apq8084.c               | 56
> ++++++++++++++++++++++++++-
>>   include/dt-bindings/clock/qcom,mmcc-apq8084.h |  8 ++++
>>   3 files changed, 64 insertions(+), 1 deletion(-)
>>
>> diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig
>> index 4dadfc9..89879e1 100644
>> --- a/drivers/clk/qcom/Kconfig
>> +++ b/drivers/clk/qcom/Kconfig
>> @@ -15,6 +15,7 @@ config APQ_GCC_8084
>>   config APQ_MMCC_8084
>>   	tristate "APQ8084 Multimedia Clock Controller"
>>   	select APQ_GCC_8084
>> +	select QCOM_GDSC
>>   	depends on COMMON_CLK_QCOM
>>   	help
>>   	  Support for the multimedia clock controller on apq8084 devices.
>> diff --git a/drivers/clk/qcom/mmcc-apq8084.c
> b/drivers/clk/qcom/mmcc-apq8084.c
>> index 157139a..626adbd 100644
>> --- a/drivers/clk/qcom/mmcc-apq8084.c
>> +++ b/drivers/clk/qcom/mmcc-apq8084.c
>> @@ -1,5 +1,5 @@
>>   /*
>> - * Copyright (c) 2014, The Linux Foundation. All rights reserved.
>> + * Copyright (c) 2014-2015, The Linux Foundation. All rights reserved.
>>    *
>>    * This software is licensed under the terms of the GNU General Public
>>    * License version 2, as published by the Free Software Foundation,
> and
>> @@ -26,6 +26,7 @@
>>   #include "clk-rcg.h"
>>   #include "clk-branch.h"
>>   #include "reset.h"
>> +#include "gdsc.h"
>>
>>   #define P_XO		0
>>   #define P_MMPLL0	1
>> @@ -3075,6 +3076,48 @@ static const struct pll_config mmpll3_config = {
>>   	.aux_output_mask = BIT(1),
>>   };
>>
>> +static struct gdsc venus0_gdsc = {
>> +	.gdscr = 0x1024,
>> +	.pd = {
>> +		.name = "venus0",
>> +	},
>> +};
>> +
>> +static struct gdsc mdss_gdsc = {
>> +	.gdscr = 0x2304,
>> +	.pd = {
>> +		.name = "mdss",
>> +	},
>> +};
>> +
>> +static struct gdsc camss_jpeg_gdsc = {
>> +	.gdscr = 0x35a4,
>> +	.pd = {
>> +		.name = "camss_jpeg",
>> +	},
>> +};
>> +
>> +static struct gdsc camss_vfe_gdsc = {
>> +	.gdscr = 0x36a4,
>> +	.pd = {
>> +		.name = "camss_vfe",
>> +	},
>> +};
>> +
>> +static struct gdsc oxili_gdsc = {
>> +	.gdscr = 0x4024,
>> +	.pd = {
>> +		.name = "oxili",
>> +	},
>> +};
>> +
>> +static struct gdsc oxilicx_gdsc = {
>> +	.gdscr = 0x4034,
>> +	.pd = {
>> +		.name = "oxilicx",
>> +	},
>> +};
>> +
>>   static struct clk_regmap *mmcc_apq8084_clocks[] = {
>>   	[MMSS_AHB_CLK_SRC] = &mmss_ahb_clk_src.clkr,
>>   	[MMSS_AXI_CLK_SRC] = &mmss_axi_clk_src.clkr,
>> @@ -3292,6 +3335,15 @@ static const struct qcom_reset_map
> mmcc_apq8084_resets[] = {
>>   	[MMSSNOCAXI_RESET] = { 0x5060 },
>>   };
>>
>> +static struct generic_pm_domain *mmcc_apq8084_gdscs[] = {
>
> With my v3, I changed this to an array of struct gdsc, I will
> update this patch and include it in my gdsc series v4 repost, that I
> will do shortly.

Thanks for rebasing, Rajendra.

Regards,
Stephane.

>
> regards,
> Rajendra
>
>> +	[VENUS0_GDSC] = &venus0_gdsc.pd,
>> +	[MDSS_GDSC] = &mdss_gdsc.pd,
>> +	[CAMSS_JPEG_GDSC] = &camss_jpeg_gdsc.pd,
>> +	[CAMSS_VFE_GDSC] = &camss_vfe_gdsc.pd,
>> +	[OXILI_GDSC] = &oxili_gdsc.pd,
>> +	[OXILICX_GDSC] = &oxilicx_gdsc.pd,
>> +};
>> +
>>   static const struct regmap_config mmcc_apq8084_regmap_config = {
>>   	.reg_bits	= 32,
>>   	.reg_stride	= 4,
>> @@ -3306,6 +3358,8 @@ static const struct qcom_cc_desc mmcc_apq8084_desc
> = {
>>   	.num_clks = ARRAY_SIZE(mmcc_apq8084_clocks),
>>   	.resets = mmcc_apq8084_resets,
>>   	.num_resets = ARRAY_SIZE(mmcc_apq8084_resets),
>> +	.gdscs = mmcc_apq8084_gdscs,
>> +	.num_gdscs = ARRAY_SIZE(mmcc_apq8084_gdscs),
>>   };
>>
>>   static const struct of_device_id mmcc_apq8084_match_table[] = {
>> diff --git a/include/dt-bindings/clock/qcom,mmcc-apq8084.h
> b/include/dt-bindings/clock/qcom,mmcc-apq8084.h
>> index d72b5b3..21fec5d 100644
>> --- a/include/dt-bindings/clock/qcom,mmcc-apq8084.h
>> +++ b/include/dt-bindings/clock/qcom,mmcc-apq8084.h
>> @@ -180,4 +180,12 @@
>>   #define VPU_SLEEP_CLK			163
>>   #define VPU_VDP_CLK			164
>>
>> +/* GDSCs */
>> +#define VENUS0_GDSC			0
>> +#define MDSS_GDSC			1
>> +#define CAMSS_JPEG_GDSC			2
>> +#define CAMSS_VFE_GDSC			3
>> +#define OXILI_GDSC			4
>> +#define OXILICX_GDSC			5
>> +
>>   #endif
>>
>
> --
> Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
> hosted by The Linux Foundation
>


-- 
Qualcomm Innovation Center, Inc.

The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

      reply	other threads:[~2015-03-26 14:43 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-03-25 13:19 [PATCH] clk: qcom: gdsc: Add GDSCs in apq8084 MMCC Stephane Viau
2015-03-26  9:13 ` Rajendra Nayak
2015-03-26 14:43   ` "Stéphane Viau" [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=b9a3cb42e6fbfcbb4b0c57a8ce4c8c85.squirrel@www.codeaurora.org \
    --to=sviau@codeaurora.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=rnayak@codeaurora.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.