All of lore.kernel.org
 help / color / mirror / Atom feed

diff for duplicates of <ecf4f412a7b56eee8730391347f39409@agner.ch>

diff --git a/a/1.txt b/N1/1.txt
index f1eda76..c1420ba 100644
--- a/a/1.txt
+++ b/N1/1.txt
@@ -11,7 +11,7 @@ On 2020-12-15 06:19, Jaehoon Chung wrote:
 >>> pretty much anything from the storage fails: (e.g. fs_devread read error
 >>> - block).
 >>>
->>> When phase is set to 270? it is detected with 8-bit bus width and is
+>>> When phase is set to 270° it is detected with 8-bit bus width and is
 >>> working fine accross all temperatures.
 >>
 >> This is new to G12, I only had such issues and reports for SM1 only until now.
@@ -22,7 +22,7 @@ On 2020-12-15 06:19, Jaehoon Chung wrote:
 >>> Hi Neil,
 >>>
 >>> I debugged this issue today on an ODROID N2+ not booting reliably. I am
->>> not sure if we can safely switch to 270? for all SoCs with
+>>> not sure if we can safely switch to 270° for all SoCs with
 >>> amlogic,meson-axg-mmc, but I guess we have to try and see what happens?
 >>> I will do a bit broader testing in the comming days here.
 >>
@@ -30,11 +30,11 @@ On 2020-12-15 06:19, Jaehoon Chung wrote:
 >> an u-boot only amlogic,meson-g12b-mmc compatible like I did for SM1.
 >>
 >>>
->>> Btw, I do see that 180? is also set in Linux. Do you have a patch to
+>>> Btw, I do see that 180° is also set in Linux. Do you have a patch to
 >>> address this in Linux?
 >>
 >> I never had such reports on Linux, I think because eMMCs are directly used
->> in HS200 mode and 180? is the right configuration for HS200...
+>> in HS200 mode and 180° is the right configuration for HS200...
 > 
 > I have checked mainline kernel with Odroid-C4.
 > Linux Kernel is using PHASE_180 and enabled HS200 by default. That's
@@ -60,7 +60,7 @@ SD communication on this platform.
 > If it needs to fix this on kernel side, i will send the patch.
 
 After more testing, we found that a 64GB eMMC stopped working when using
-270?. We now switched back to 180? and lowered frequency to 24MHz. This
+270°. We now switched back to 180° and lowered frequency to 24MHz. This
 setting works on all eMMCs we had around to test, across temperature
 ranges (booting when cold, as well as booting when heated up slightly).
 
diff --git a/a/content_digest b/N1/content_digest
index 0d10be7..8838c88 100644
--- a/a/content_digest
+++ b/N1/content_digest
@@ -14,13 +14,19 @@
   "From\0Stefan Agner <stefan\@agner.ch>\0"
 ]
 [
-  "Subject\0[PATCH] mmc: meson-gx: change clock phase value on AGX SoCs\0"
+  "Subject\0Re: [PATCH] mmc: meson-gx: change clock phase value on AGX SoCs\0"
 ]
 [
   "Date\0Tue, 15 Dec 2020 08:25:47 +0100\0"
 ]
 [
-  "To\0u-boot\@lists.denx.de\0"
+  "To\0Jaehoon Chung <jh80.chung\@samsung.com>\0"
+]
+[
+  "Cc\0Neil Armstrong <narmstrong\@baylibre.com>",
+  " peng.fan\@nxp.com",
+  " u-boot-amlogic\@groups.io",
+  " u-boot\@lists.denx.de\0"
 ]
 [
   "\0000:1\0"
@@ -42,7 +48,7 @@
   ">>> pretty much anything from the storage fails: (e.g. fs_devread read error\n",
   ">>> - block).\n",
   ">>>\n",
-  ">>> When phase is set to 270? it is detected with 8-bit bus width and is\n",
+  ">>> When phase is set to 270\302\260 it is detected with 8-bit bus width and is\n",
   ">>> working fine accross all temperatures.\n",
   ">>\n",
   ">> This is new to G12, I only had such issues and reports for SM1 only until now.\n",
@@ -53,7 +59,7 @@
   ">>> Hi Neil,\n",
   ">>>\n",
   ">>> I debugged this issue today on an ODROID N2+ not booting reliably. I am\n",
-  ">>> not sure if we can safely switch to 270? for all SoCs with\n",
+  ">>> not sure if we can safely switch to 270\302\260 for all SoCs with\n",
   ">>> amlogic,meson-axg-mmc, but I guess we have to try and see what happens?\n",
   ">>> I will do a bit broader testing in the comming days here.\n",
   ">>\n",
@@ -61,11 +67,11 @@
   ">> an u-boot only amlogic,meson-g12b-mmc compatible like I did for SM1.\n",
   ">>\n",
   ">>>\n",
-  ">>> Btw, I do see that 180? is also set in Linux. Do you have a patch to\n",
+  ">>> Btw, I do see that 180\302\260 is also set in Linux. Do you have a patch to\n",
   ">>> address this in Linux?\n",
   ">>\n",
   ">> I never had such reports on Linux, I think because eMMCs are directly used\n",
-  ">> in HS200 mode and 180? is the right configuration for HS200...\n",
+  ">> in HS200 mode and 180\302\260 is the right configuration for HS200...\n",
   "> \n",
   "> I have checked mainline kernel with Odroid-C4.\n",
   "> Linux Kernel is using PHASE_180 and enabled HS200 by default. That's\n",
@@ -91,7 +97,7 @@
   "> If it needs to fix this on kernel side, i will send the patch.\n",
   "\n",
   "After more testing, we found that a 64GB eMMC stopped working when using\n",
-  "270?. We now switched back to 180? and lowered frequency to 24MHz. This\n",
+  "270\302\260. We now switched back to 180\302\260 and lowered frequency to 24MHz. This\n",
   "setting works on all eMMCs we had around to test, across temperature\n",
   "ranges (booting when cold, as well as booting when heated up slightly).\n",
   "\n",
@@ -174,4 +180,4 @@
   ">>"
 ]
 
-e7183afc39b839ac30e57b3ec87d7c34b2737d5859080276cb34d924c9c25598
+0620d3c7c60d5697ca1623bb33894a1fe69163c21c1267038c1a3ea4f0a8cb14
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.