From: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
To: Takashi Iwai <tiwai@suse.de>, alsa-devel@alsa-project.org
Cc: Jerome Anand <jerome.anand@intel.com>
Subject: Re: [PATCH 17/53] ALSA: x86: Drop unused hw_silence field
Date: Thu, 2 Feb 2017 13:11:10 -0600 [thread overview]
Message-ID: <110ce179-24f5-9898-3d26-44e4c559e55a@linux.intel.com> (raw)
In-Reply-To: <20170202170307.24484-19-tiwai@suse.de>
On 2/2/17 11:02 AM, Takashi Iwai wrote:
> It's nowhere used. Let's drop it.
That's one of the things I wanted to add. When you start playback there
is a 1-2s period where the receiver is still looking at the data to
figure out if it's PCM or compressed, and you lose those 1-2s of audio.
The hw silence mode is a way to keep the link active.
But I guess we can remove first and re-add later so no objections.
>
> Signed-off-by: Takashi Iwai <tiwai@suse.de>
> ---
> sound/x86/intel_hdmi_audio.c | 1 -
> sound/x86/intel_hdmi_audio.h | 2 --
> 2 files changed, 3 deletions(-)
>
> diff --git a/sound/x86/intel_hdmi_audio.c b/sound/x86/intel_hdmi_audio.c
> index e08691110a48..efc56544af17 100644
> --- a/sound/x86/intel_hdmi_audio.c
> +++ b/sound/x86/intel_hdmi_audio.c
> @@ -1696,7 +1696,6 @@ int hdmi_audio_probe(struct platform_device *devptr,
> pm_runtime_set_active(intelhaddata->dev);
> pm_runtime_enable(intelhaddata->dev);
>
> - intelhaddata->hw_silence = 1;
> *had_ret = intelhaddata;
>
> return 0;
> diff --git a/sound/x86/intel_hdmi_audio.h b/sound/x86/intel_hdmi_audio.h
> index da0a927d37fe..32a2fb766e47 100644
> --- a/sound/x86/intel_hdmi_audio.h
> +++ b/sound/x86/intel_hdmi_audio.h
> @@ -118,7 +118,6 @@ struct had_pvt_data {
> * @kctl: holds kctl ptrs used for channel map
> * @chmap: holds channel map info
> * @audio_reg_base: hdmi audio register base offset
> - * @hw_silence: flag indicates SoC support for HW silence/Keep alive
> * @underrun_count: PCM stream underrun counter
> */
> struct snd_intelhad {
> @@ -142,7 +141,6 @@ struct snd_intelhad {
> struct snd_pcm_chmap *chmap;
> unsigned int *audio_reg_base;
> unsigned int audio_cfg_offset;
> - bool hw_silence;
> int underrun_count;
> };
>
>
next prev parent reply other threads:[~2017-02-02 19:11 UTC|newest]
Thread overview: 60+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-02-02 17:02 [PATCH 00/53] Intel LPE audio driver cleanups Takashi Iwai
2017-02-02 17:02 ` [PATCH 01/53] ALSA: x86: Don't set PCM state to DISCONNECTED Takashi Iwai
2017-02-02 17:02 ` [PATCH] drm/i915: Enable VLV audio chicken bit for LPE audio Takashi Iwai
2017-02-02 17:07 ` Takashi Iwai
2017-02-02 17:02 ` [PATCH 02/53] ALSA: x86: Remove v1 ops and structs Takashi Iwai
2017-02-02 17:02 ` [PATCH 03/53] ALSA: x86: Drop indirect calls of had_ops Takashi Iwai
2017-02-02 17:02 ` [PATCH 04/53] ALSA: x86: Replace indirect register ops with direct calls Takashi Iwai
2017-02-02 17:02 ` [PATCH 05/53] ALSA: x86: Replace indirect query_ops " Takashi Iwai
2017-02-02 17:02 ` [PATCH 06/53] ALSA: x86: Drop snd_intel_had_interface indirect calls Takashi Iwai
2017-02-02 17:02 ` [PATCH 07/53] ALSA: x86: Pass snd_intelhad object to helpers Takashi Iwai
2017-02-02 17:02 ` [PATCH 08/53] ALSA: x86: Handle the error from hdmi_audio_probe() properly Takashi Iwai
2017-02-02 17:02 ` [PATCH 09/53] ALSA: x86: Drop useless mutex at probe Takashi Iwai
2017-02-02 17:02 ` [PATCH 10/53] ALSA: x86: Call event callback directly Takashi Iwai
2017-02-02 17:02 ` [PATCH 11/53] ALSA: x86: Fix possible stale interrupt calls Takashi Iwai
2017-02-02 17:02 ` [PATCH 12/53] ALSA: x86: Drop unused mid_hdmi_audio_is_busy() Takashi Iwai
2017-02-02 17:02 ` [PATCH 13/53] ALSA: x86: Drop the global platform device reference Takashi Iwai
2017-02-02 17:02 ` [PATCH 14/53] ALSA: x86: Drop global hlpe_state Takashi Iwai
2017-02-02 17:02 ` [PATCH 15/53] ALSA: x86: Drop global ELD copy Takashi Iwai
2017-02-02 17:02 ` [PATCH 16/53] ALSA: x86: Move the global underrun_count to struct snd_intelhad Takashi Iwai
2017-02-02 17:02 ` [PATCH 17/53] ALSA: x86: Drop unused hw_silence field Takashi Iwai
2017-02-02 19:11 ` Pierre-Louis Bossart [this message]
2017-02-02 20:04 ` Takashi Iwai
2017-02-02 20:26 ` Pierre-Louis Bossart
2017-02-03 4:25 ` Ughreja, Rakesh A
2017-02-02 17:02 ` [PATCH 18/53] ALSA: x86: Move dma_mask debug print into intel_hdmi_lpe_audio.c Takashi Iwai
2017-02-02 17:02 ` [PATCH 19/53] ALSA: x86: Embed snd_intelhad into snd_card Takashi Iwai
2017-02-02 17:02 ` [PATCH 20/53] ALSA: x86: Drop superfluous CHT PCI ID check Takashi Iwai
2017-02-02 17:02 ` [PATCH 21/53] ALSA: x86: Check platform_data earlier Takashi Iwai
2017-02-02 17:02 ` [PATCH 22/53] ALSA: x86: Call snd_card_register() at the end Takashi Iwai
2017-02-02 17:02 ` [PATCH 23/53] ALSA: x86: Drop unused hdmi_audio_query() Takashi Iwai
2017-02-02 17:02 ` [PATCH 24/53] ALSA: x86: Flatten two abstraction layers Takashi Iwai
2017-02-02 17:02 ` [PATCH 25/53] ALSA: x86: Fold intel_hdmi_audio_if.c into main file Takashi Iwai
2017-02-02 17:02 ` [PATCH 26/53] ALSA: x86: Replace pr_xxx() with dev_xxx() Takashi Iwai
2017-02-02 17:02 ` [PATCH 27/53] ALSA: x86: Fix for CONFIG_PM=n Takashi Iwai
2017-02-02 17:02 ` [PATCH 28/53] ALSA: x86: Remove indirect call of snd_pcm_period_elapsed() Takashi Iwai
2017-02-02 17:02 ` [PATCH 29/53] ALSA: x86: Drop unused fields from snd_intelhad struct Takashi Iwai
2017-02-02 17:02 ` [PATCH 30/53] ALSA: x86: Drop superfluous PCM private_free Takashi Iwai
2017-02-02 17:02 ` [PATCH 31/53] ALSA: x86: Fix sleep-in-atomic via i915 notification Takashi Iwai
2017-02-02 17:02 ` [PATCH 32/53] ALSA: x86: Remove superfluous check at resume Takashi Iwai
2017-02-02 17:02 ` [PATCH 33/53] ALSA: x86: Drop had_get_hwstate() Takashi Iwai
2017-02-02 17:02 ` [PATCH 34/53] ALSA: x86: Tidy up codes Takashi Iwai
2017-02-02 17:02 ` [PATCH 35/53] ALSA: x86: Remove _v[12] suffices Takashi Iwai
2017-02-02 17:02 ` [PATCH 36/53] ALSA: x86: Constfy tables Takashi Iwai
2017-02-02 17:02 ` [PATCH 37/53] ALSA: x86: Remove superfluous irqsave flags Takashi Iwai
2017-02-02 17:02 ` [PATCH 38/53] ALSA: x86: Fix racy access to chmap Takashi Iwai
2017-02-02 17:02 ` [PATCH 39/53] ALSA: x86: Drop flag_underrun field Takashi Iwai
2017-02-02 17:02 ` [PATCH 40/53] ALSA: x86: Drop superfluous state field Takashi Iwai
2017-02-02 17:02 ` [PATCH 41/53] ALSA: x86: Drop redundant had_stream_pvt Takashi Iwai
2017-02-02 17:02 ` [PATCH 42/53] ALSA: x86: Drop unused fields from pcm_stream_info Takashi Iwai
2017-02-02 17:02 ` [PATCH 43/53] ALSA: x86: Properly manage PCM substream lifetype Takashi Iwai
2017-02-02 17:02 ` [PATCH 44/53] ALSA: x86: Implement runtime PM Takashi Iwai
2017-02-02 17:02 ` [PATCH 45/53] ALSA: x86: Move stream status into pcm_stream_info Takashi Iwai
2017-02-02 17:03 ` [PATCH 46/53] ALSA: x86: Use the standard ELD bytes definitions Takashi Iwai
2017-02-02 17:03 ` [PATCH 47/53] ALSA: x86: Reduce redundant register field names Takashi Iwai
2017-02-02 17:03 ` [PATCH 48/53] ALSA: x86: Clean up unused defines and inclusions Takashi Iwai
2017-02-02 17:03 ` [PATCH 49/53] ALSA: x86: Create ELD control element Takashi Iwai
2017-02-02 17:03 ` [PATCH 50/53] ALSA: x86: Set CA bits for DisplayPort too Takashi Iwai
2017-02-02 17:03 ` [PATCH 51/53] ALSA: x86: Simplify comments Takashi Iwai
2017-02-02 17:03 ` [PATCH 52/53] ALSA: x86: Yet more tidy-up and clean-ups Takashi Iwai
2017-02-02 17:03 ` [PATCH 53/53] ALSA: x86: Rename drv_status to connected Takashi Iwai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=110ce179-24f5-9898-3d26-44e4c559e55a@linux.intel.com \
--to=pierre-louis.bossart@linux.intel.com \
--cc=alsa-devel@alsa-project.org \
--cc=jerome.anand@intel.com \
--cc=tiwai@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).