From: "Keith A. Milner" <maillist@superlative.org>
To: alsa-devel@alsa-project.org
Subject: Re: [PATCH] ALSA: usb-audio: Apply implicit feedback mode for BOSS devices
Date: Thu, 22 Apr 2021 15:41:16 +0100 [thread overview]
Message-ID: <12753665.uLZWGnKmhe@kam-desktop> (raw)
In-Reply-To: <CAOsVg8p=yikaRQ-=RWdO8nWdC70tnw4kQ17KM-smShQvujrRJg@mail.gmail.com>
On Tuesday, 20 April 2021 05:20:57 BST Lucas wrote:
> Keith, if it's anything like the Roland devices I've tested with this
> long-awaited patch, could you show the JS-8's "lsusb -v"?
Output pasted further down.
>
> For me, silence due to the wrong line takes the form of unheard output
> playback, while still working for input capture, so I'm not sure this has
> any bearing on your issue.
When testing Takashi-san's earlier patches, I had a mixture of experiences
including (depending on the patch) some devices recording silence, some
playing back silence, and some where the record would lock up until playback
was started (or vice versa).
>
> Takashi Iwai has indicated a likely connection between needing the
> IMPLICIT_FB_BOTH_DEVICE line if there's "Asynchronous" "Synch Type" for
> both input and output endpoints. Otherwise, possibly, it should be
> reverted to IMPLICIT_FB_FIXED_DEVICE for the JS-8.
As you can see, this has "Asynchronous" "Synch Type" on EP4 IN and EP 5 OUT,
so I don't think it's this.
Bus 001 Device 007: ID 0582:0109 Roland Corp. eBand JS-8
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 255 Vendor Specific Class
bDeviceSubClass 0
bDeviceProtocol 255
bMaxPacketSize0 64
idVendor 0x0582 Roland Corp.
idProduct 0x0109 eBand JS-8
bcdDevice 0.01
iManufacturer 1 BOSS
iProduct 2 JS-8
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 0x00a7
bNumInterfaces 3
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xc0
Self Powered
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 0
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 2
bInterfaceProtocol 2
iInterface 0
** UNRECOGNIZED: 06 24 f1 01 00 00
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 1
bNumEndpoints 1
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 2
bInterfaceProtocol 2
iInterface 0
** UNRECOGNIZED: 07 24 01 01 00 01 00
** UNRECOGNIZED: 0b 24 02 01 02 04 18 01 44 ac 00
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x05 EP 5 OUT
bmAttributes 5
Transfer Type Isochronous
Synch Type Asynchronous
Usage Type Data
wMaxPacketSize 0x0070 1x 112 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 0
bNumEndpoints 0
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 2
bInterfaceProtocol 1
iInterface 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 1
bNumEndpoints 1
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 2
bInterfaceProtocol 1
iInterface 0
** UNRECOGNIZED: 07 24 01 07 00 01 00
** UNRECOGNIZED: 0b 24 02 01 02 04 18 01 44 ac 00
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x84 EP 4 IN
bmAttributes 37
Transfer Type Isochronous
Synch Type Asynchronous
Usage Type Implicit feedback Data
wMaxPacketSize 0x0070 1x 112 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 2
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 3
bInterfaceProtocol 0
iInterface 0
** UNRECOGNIZED: 06 24 f1 02 02 02
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x03 EP 3 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 2
bAlternateSetting 1
bNumEndpoints 2
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 3
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x03 EP 3 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 1
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00
bDeviceClass 8 Mass Storage
bDeviceSubClass 6 SCSI
bDeviceProtocol 80 Bulk-Only
bMaxPacketSize0 64
bNumConfigurations 0
can't get debug descriptor: Resource temporarily unavailable
Device Status: 0x0001
Self Powered
Regards,
Keith
next prev parent reply other threads:[~2021-04-22 14:49 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-04-14 8:32 [PATCH] ALSA: usb-audio: Apply implicit feedback mode for BOSS devices Takashi Iwai
2021-04-14 15:08 ` Mike Oliphant
2021-04-19 13:45 ` Keith A. Milner
2021-04-20 4:20 ` Lucas
2021-04-20 15:42 ` Lucas
2021-04-20 16:36 ` Takashi Iwai
2021-04-21 4:59 ` Lucas
2021-04-21 8:59 ` Takashi Iwai
2021-04-21 16:39 ` Lucas
2021-04-22 4:05 ` Lucas
2021-04-22 4:10 ` Lucas
2021-04-22 12:02 ` Takashi Iwai
2021-04-22 14:41 ` Keith A. Milner [this message]
2021-04-22 15:31 ` Lucas
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=12753665.uLZWGnKmhe@kam-desktop \
--to=maillist@superlative.org \
--cc=alsa-devel@alsa-project.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).