From: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
To: alsa-devel@alsa-project.org
Cc: tiwai@suse.de, broonie@kernel.org,
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Subject: [alsa-devel] [PATCH 0/9] ASoC: SOF updates for Intel/i.MX
Date: Tue, 8 Oct 2019 11:44:34 -0500 [thread overview]
Message-ID: <20191008164443.1358-1-pierre-louis.bossart@linux.intel.com> (raw)
Small set of updates for Intel and NXP platforms.
On the Intel side, the code is now aligned with the HDaudio legacy
with the sync_write. OEMs reported concerns with mute LEDs not
supported with SOF/UCM, we can now tie a topology-defined control with
a mute LED. Note that the large set of differences in the topology is
largely due to code move, the new functionality is minimal in size.
On the i.MX side, add topology support for ESAI parameters. This
reflects on-going work on the firmware side.
And last add debug module parameters for ACPI and PCI modules. For now
the only flag used is for PM runtime, e.g. to measure the
suspend-resume latencies of child devices without dealing with DSP
reinitialization or keep the parent active while testing the SoundWire
clock-stop-mode.
Daniel Baluta (2):
ASoC: SOF: imx: Describe ESAI parameters to be sent to DSP
ASoC: SOF: imx: Read ESAI parameters and send them to DSP
Jaska Uimonen (3):
ASoC: SOF: enable dual control for pga
AsoC: SOF: refactor control load code
ASoC: SOF: acpi led support for switch controls
Kai Vehmanen (2):
ASoC: SOF: enable sync_write in hdac_bus
Revert "ASoC: SOF: Force polling mode on CFL and CNL"
Pierre-Louis Bossart (2):
ASoC: SOF: acpi: add debug module param
ASoC: SOF: pci: add debug module param
include/sound/sof/dai-imx.h | 34 +++
include/sound/sof/dai.h | 2 +
include/uapi/sound/sof/abi.h | 2 +-
include/uapi/sound/sof/tokens.h | 7 +-
sound/soc/sof/control.c | 32 +++
sound/soc/sof/intel/hda.c | 8 +-
sound/soc/sof/pcm.c | 8 +
sound/soc/sof/sof-acpi-dev.c | 12 +-
sound/soc/sof/sof-pci-dev.c | 12 +-
sound/soc/sof/sof-priv.h | 9 +
sound/soc/sof/topology.c | 401 +++++++++++++++++++-------------
11 files changed, 354 insertions(+), 173 deletions(-)
create mode 100644 include/sound/sof/dai-imx.h
--
2.20.1
_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
https://mailman.alsa-project.org/mailman/listinfo/alsa-devel
next reply other threads:[~2019-10-08 16:45 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-10-08 16:44 Pierre-Louis Bossart [this message]
2019-10-08 16:44 ` [alsa-devel] [PATCH 1/9] ASoC: SOF: enable sync_write in hdac_bus Pierre-Louis Bossart
2019-10-10 14:22 ` [alsa-devel] Applied "ASoC: SOF: enable sync_write in hdac_bus" to the asoc tree Mark Brown
2019-10-08 16:44 ` [alsa-devel] [PATCH 2/9] Revert "ASoC: SOF: Force polling mode on CFL and CNL" Pierre-Louis Bossart
2019-10-10 14:08 ` Mark Brown
2019-10-10 15:41 ` Pierre-Louis Bossart
2019-10-10 14:22 ` [alsa-devel] Applied "Revert "ASoC: SOF: Force polling mode on CFL and CNL"" to the asoc tree Mark Brown
2019-10-08 16:44 ` [alsa-devel] [PATCH 3/9] ASoC: SOF: acpi: add debug module param Pierre-Louis Bossart
2019-10-10 14:22 ` [alsa-devel] Applied "ASoC: SOF: acpi: add debug module param" to the asoc tree Mark Brown
2019-10-08 16:44 ` [alsa-devel] [PATCH 4/9] ASoC: SOF: pci: add debug module param Pierre-Louis Bossart
2019-10-10 14:22 ` [alsa-devel] Applied "ASoC: SOF: pci: add debug module param" to the asoc tree Mark Brown
2019-10-08 16:44 ` [alsa-devel] [PATCH 5/9] ASoC: SOF: imx: Describe ESAI parameters to be sent to DSP Pierre-Louis Bossart
2019-10-10 14:22 ` [alsa-devel] Applied "ASoC: SOF: imx: Describe ESAI parameters to be sent to DSP" to the asoc tree Mark Brown
2019-10-08 16:44 ` [alsa-devel] [PATCH 6/9] ASoC: SOF: imx: Read ESAI parameters and send them to DSP Pierre-Louis Bossart
2019-10-10 14:22 ` [alsa-devel] Applied "ASoC: SOF: imx: Read ESAI parameters and send them to DSP" to the asoc tree Mark Brown
2019-10-08 16:44 ` [alsa-devel] [PATCH 7/9] ASoC: SOF: enable dual control for pga Pierre-Louis Bossart
2019-10-10 14:22 ` [alsa-devel] Applied "ASoC: SOF: enable dual control for pga" to the asoc tree Mark Brown
2019-10-08 16:44 ` [alsa-devel] [PATCH 8/9] AsoC: SOF: refactor control load code Pierre-Louis Bossart
2019-10-10 14:22 ` [alsa-devel] Applied "AsoC: SOF: refactor control load code" to the asoc tree Mark Brown
2019-10-08 16:44 ` [alsa-devel] [PATCH 9/9] ASoC: SOF: acpi led support for switch controls Pierre-Louis Bossart
2019-10-10 14:22 ` [alsa-devel] Applied "ASoC: SOF: acpi led support for switch controls" to the asoc tree Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191008164443.1358-1-pierre-louis.bossart@linux.intel.com \
--to=pierre-louis.bossart@linux.intel.com \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@kernel.org \
--cc=tiwai@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).