From: Colin Ian King <colin.i.king@gmail.com>
To: Oder Chiou <oder_chiou@realtek.com>,
Liam Girdwood <lgirdwood@gmail.com>,
Mark Brown <broonie@kernel.org>, Jaroslav Kysela <perex@perex.cz>,
Takashi Iwai <tiwai@suse.com>,
alsa-devel@alsa-project.org
Cc: kernel-janitors@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH][next] ASoC: rt715: Make read-only arrays capture_reg_H and capture_reg_L static const
Date: Fri, 2 Dec 2022 17:14:50 +0000 [thread overview]
Message-ID: <20221202171450.1815346-1-colin.i.king@gmail.com> (raw)
Don't populate the read-only arrays capture_reg_H and capture_reg_L
on the stack but instead make them static const. Also makes the
object code a little smaller.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
---
sound/soc/codecs/rt715.c | 48 ++++++++++++++++++++--------------------
1 file changed, 24 insertions(+), 24 deletions(-)
diff --git a/sound/soc/codecs/rt715.c b/sound/soc/codecs/rt715.c
index 917a04092da2..1a2036ccfbac 100644
--- a/sound/soc/codecs/rt715.c
+++ b/sound/soc/codecs/rt715.c
@@ -204,12 +204,12 @@ static int rt715_set_main_switch_put(struct snd_kcontrol *kcontrol,
struct snd_soc_dapm_context *dapm =
snd_soc_component_get_dapm(component);
struct rt715_priv *rt715 = snd_soc_component_get_drvdata(component);
- unsigned int capture_reg_H[] = {RT715_SET_GAIN_MIC_ADC_H,
- RT715_SET_GAIN_LINE_ADC_H, RT715_SET_GAIN_MIX_ADC_H,
- RT715_SET_GAIN_MIX_ADC2_H};
- unsigned int capture_reg_L[] = {RT715_SET_GAIN_MIC_ADC_L,
- RT715_SET_GAIN_LINE_ADC_L, RT715_SET_GAIN_MIX_ADC_L,
- RT715_SET_GAIN_MIX_ADC2_L};
+ static const unsigned int capture_reg_H[] = {
+ RT715_SET_GAIN_MIC_ADC_H, RT715_SET_GAIN_LINE_ADC_H,
+ RT715_SET_GAIN_MIX_ADC_H, RT715_SET_GAIN_MIX_ADC2_H };
+ static const unsigned int capture_reg_L[] = {
+ RT715_SET_GAIN_MIC_ADC_L, RT715_SET_GAIN_LINE_ADC_L,
+ RT715_SET_GAIN_MIX_ADC_L, RT715_SET_GAIN_MIX_ADC2_L };
unsigned int addr_h, addr_l, val_h = 0x0, val_ll, val_lr;
unsigned int k_shift = RT715_DIR_IN_SFT, k_changed = 0;
unsigned int read_ll, read_rl, i, j, loop_cnt = 4;
@@ -284,12 +284,12 @@ static int rt715_set_main_switch_get(struct snd_kcontrol *kcontrol,
{
struct snd_soc_component *component = snd_kcontrol_chip(kcontrol);
struct rt715_priv *rt715 = snd_soc_component_get_drvdata(component);
- unsigned int capture_reg_H[] = {RT715_SET_GAIN_MIC_ADC_H,
- RT715_SET_GAIN_LINE_ADC_H, RT715_SET_GAIN_MIX_ADC_H,
- RT715_SET_GAIN_MIX_ADC2_H};
- unsigned int capture_reg_L[] = {RT715_SET_GAIN_MIC_ADC_L,
- RT715_SET_GAIN_LINE_ADC_L, RT715_SET_GAIN_MIX_ADC_L,
- RT715_SET_GAIN_MIX_ADC2_L};
+ static const unsigned int capture_reg_H[] = {
+ RT715_SET_GAIN_MIC_ADC_H, RT715_SET_GAIN_LINE_ADC_H,
+ RT715_SET_GAIN_MIX_ADC_H, RT715_SET_GAIN_MIX_ADC2_H };
+ static const unsigned int capture_reg_L[] = {
+ RT715_SET_GAIN_MIC_ADC_L, RT715_SET_GAIN_LINE_ADC_L,
+ RT715_SET_GAIN_MIX_ADC_L, RT715_SET_GAIN_MIX_ADC2_L };
unsigned int addr_h, addr_l, val_h = 0x0, i, loop_cnt = 4;
unsigned int read_ll, read_rl;
@@ -312,12 +312,12 @@ static int rt715_set_main_vol_put(struct snd_kcontrol *kcontrol,
struct snd_soc_dapm_context *dapm =
snd_soc_component_get_dapm(component);
struct rt715_priv *rt715 = snd_soc_component_get_drvdata(component);
- unsigned int capture_reg_H[] = {RT715_SET_GAIN_MIC_ADC_H,
- RT715_SET_GAIN_LINE_ADC_H, RT715_SET_GAIN_MIX_ADC_H,
- RT715_SET_GAIN_MIX_ADC2_H};
- unsigned int capture_reg_L[] = {RT715_SET_GAIN_MIC_ADC_L,
- RT715_SET_GAIN_LINE_ADC_L, RT715_SET_GAIN_MIX_ADC_L,
- RT715_SET_GAIN_MIX_ADC2_L};
+ static const unsigned int capture_reg_H[] = {
+ RT715_SET_GAIN_MIC_ADC_H, RT715_SET_GAIN_LINE_ADC_H,
+ RT715_SET_GAIN_MIX_ADC_H, RT715_SET_GAIN_MIX_ADC2_H };
+ static const unsigned int capture_reg_L[] = {
+ RT715_SET_GAIN_MIC_ADC_L, RT715_SET_GAIN_LINE_ADC_L,
+ RT715_SET_GAIN_MIX_ADC_L, RT715_SET_GAIN_MIX_ADC2_L};
unsigned int addr_h, addr_l, val_h = 0x0, val_ll, val_lr;
unsigned int read_ll, read_rl, i, j, loop_cnt = 4, k_changed = 0;
unsigned int k_shift = RT715_DIR_IN_SFT, k_max = 0x3f;
@@ -393,12 +393,12 @@ static int rt715_set_main_vol_get(struct snd_kcontrol *kcontrol,
{
struct snd_soc_component *component = snd_kcontrol_chip(kcontrol);
struct rt715_priv *rt715 = snd_soc_component_get_drvdata(component);
- unsigned int capture_reg_H[] = {RT715_SET_GAIN_MIC_ADC_H,
- RT715_SET_GAIN_LINE_ADC_H, RT715_SET_GAIN_MIX_ADC_H,
- RT715_SET_GAIN_MIX_ADC2_H};
- unsigned int capture_reg_L[] = {RT715_SET_GAIN_MIC_ADC_L,
- RT715_SET_GAIN_LINE_ADC_L, RT715_SET_GAIN_MIX_ADC_L,
- RT715_SET_GAIN_MIX_ADC2_L};
+ static const unsigned int capture_reg_H[] = {
+ RT715_SET_GAIN_MIC_ADC_H, RT715_SET_GAIN_LINE_ADC_H,
+ RT715_SET_GAIN_MIX_ADC_H, RT715_SET_GAIN_MIX_ADC2_H };
+ static const unsigned int capture_reg_L[] = {
+ RT715_SET_GAIN_MIC_ADC_L, RT715_SET_GAIN_LINE_ADC_L,
+ RT715_SET_GAIN_MIX_ADC_L, RT715_SET_GAIN_MIX_ADC2_L };
unsigned int addr_h, addr_l, val_h = 0x0, i, loop_cnt = 4;
unsigned int read_ll, read_rl;
--
2.38.1
next reply other threads:[~2022-12-02 17:15 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-12-02 17:14 Colin Ian King [this message]
2022-12-05 17:29 ` [PATCH][next] ASoC: rt715: Make read-only arrays capture_reg_H and capture_reg_L static const Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221202171450.1815346-1-colin.i.king@gmail.com \
--to=colin.i.king@gmail.com \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@kernel.org \
--cc=kernel-janitors@vger.kernel.org \
--cc=lgirdwood@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=oder_chiou@realtek.com \
--cc=perex@perex.cz \
--cc=tiwai@suse.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).