From: Jerome Brunet <jbrunet@baylibre.com>
To: Mark Brown <broonie@kernel.org>, Liam Girdwood <lgirdwood@gmail.com>
Cc: Jerome Brunet <jbrunet@baylibre.com>,
alsa-devel@alsa-project.org, linux-kernel@vger.kernel.org,
linux-amlogic@lists.infradead.org
Subject: [PATCH 6/6] ASoC: meson: axg-fifo: use FIELD helpers
Date: Fri, 23 Feb 2024 18:51:12 +0100 [thread overview]
Message-ID: <20240223175116.2005407-7-jbrunet@baylibre.com> (raw)
In-Reply-To: <20240223175116.2005407-1-jbrunet@baylibre.com>
Use FIELD_GET() and FIELD_PREP() helpers instead of doing it manually.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
---
sound/soc/meson/axg-fifo.c | 24 ++++++++++++------------
sound/soc/meson/axg-fifo.h | 12 +++++-------
sound/soc/meson/axg-frddr.c | 4 ++--
sound/soc/meson/axg-toddr.c | 21 +++++++++------------
4 files changed, 28 insertions(+), 33 deletions(-)
diff --git a/sound/soc/meson/axg-fifo.c b/sound/soc/meson/axg-fifo.c
index 65541fdb0038..597fd39e6e48 100644
--- a/sound/soc/meson/axg-fifo.c
+++ b/sound/soc/meson/axg-fifo.c
@@ -145,8 +145,8 @@ int axg_fifo_pcm_hw_params(struct snd_soc_component *component,
/* Enable irq if necessary */
irq_en = runtime->no_period_wakeup ? 0 : FIFO_INT_COUNT_REPEAT;
regmap_update_bits(fifo->map, FIFO_CTRL0,
- CTRL0_INT_EN(FIFO_INT_COUNT_REPEAT),
- CTRL0_INT_EN(irq_en));
+ CTRL0_INT_EN,
+ FIELD_PREP(CTRL0_INT_EN, irq_en));
return 0;
}
@@ -176,9 +176,9 @@ int axg_fifo_pcm_hw_free(struct snd_soc_component *component,
{
struct axg_fifo *fifo = axg_fifo_data(ss);
- /* Disable the block count irq */
+ /* Disable irqs */
regmap_update_bits(fifo->map, FIFO_CTRL0,
- CTRL0_INT_EN(FIFO_INT_COUNT_REPEAT), 0);
+ CTRL0_INT_EN, 0);
return 0;
}
@@ -187,13 +187,13 @@ EXPORT_SYMBOL_GPL(axg_fifo_pcm_hw_free);
static void axg_fifo_ack_irq(struct axg_fifo *fifo, u8 mask)
{
regmap_update_bits(fifo->map, FIFO_CTRL1,
- CTRL1_INT_CLR(FIFO_INT_MASK),
- CTRL1_INT_CLR(mask));
+ CTRL1_INT_CLR,
+ FIELD_PREP(CTRL1_INT_CLR, mask));
/* Clear must also be cleared */
regmap_update_bits(fifo->map, FIFO_CTRL1,
- CTRL1_INT_CLR(FIFO_INT_MASK),
- 0);
+ CTRL1_INT_CLR,
+ FIELD_PREP(CTRL1_INT_CLR, 0));
}
static irqreturn_t axg_fifo_pcm_irq_block(int irq, void *dev_id)
@@ -204,7 +204,7 @@ static irqreturn_t axg_fifo_pcm_irq_block(int irq, void *dev_id)
regmap_read(fifo->map, FIFO_STATUS1, &status);
- status = STATUS1_INT_STS(status) & FIFO_INT_MASK;
+ status = FIELD_GET(STATUS1_INT_STS, status);
if (status & FIFO_INT_COUNT_REPEAT)
snd_pcm_period_elapsed(ss);
else
@@ -254,15 +254,15 @@ int axg_fifo_pcm_open(struct snd_soc_component *component,
/* Setup status2 so it reports the memory pointer */
regmap_update_bits(fifo->map, FIFO_CTRL1,
- CTRL1_STATUS2_SEL_MASK,
- CTRL1_STATUS2_SEL(STATUS2_SEL_DDR_READ));
+ CTRL1_STATUS2_SEL,
+ FIELD_PREP(CTRL1_STATUS2_SEL, STATUS2_SEL_DDR_READ));
/* Make sure the dma is initially disabled */
__dma_enable(fifo, false);
/* Disable irqs until params are ready */
regmap_update_bits(fifo->map, FIFO_CTRL0,
- CTRL0_INT_EN(FIFO_INT_MASK), 0);
+ CTRL0_INT_EN, 0);
/* Clear any pending interrupt */
axg_fifo_ack_irq(fifo, FIFO_INT_MASK);
diff --git a/sound/soc/meson/axg-fifo.h b/sound/soc/meson/axg-fifo.h
index a14c31eb06d8..4c48c0a08481 100644
--- a/sound/soc/meson/axg-fifo.h
+++ b/sound/soc/meson/axg-fifo.h
@@ -40,21 +40,19 @@ struct snd_soc_pcm_runtime;
#define FIFO_CTRL0 0x00
#define CTRL0_DMA_EN BIT(31)
-#define CTRL0_INT_EN(x) ((x) << 16)
+#define CTRL0_INT_EN GENMASK(23, 16)
#define CTRL0_SEL_MASK GENMASK(2, 0)
#define CTRL0_SEL_SHIFT 0
#define FIFO_CTRL1 0x04
-#define CTRL1_INT_CLR(x) ((x) << 0)
-#define CTRL1_STATUS2_SEL_MASK GENMASK(11, 8)
-#define CTRL1_STATUS2_SEL(x) ((x) << 8)
+#define CTRL1_INT_CLR GENMASK(7, 0)
+#define CTRL1_STATUS2_SEL GENMASK(11, 8)
#define STATUS2_SEL_DDR_READ 0
-#define CTRL1_FRDDR_DEPTH_MASK GENMASK(31, 24)
-#define CTRL1_FRDDR_DEPTH(x) ((x) << 24)
+#define CTRL1_FRDDR_DEPTH GENMASK(31, 24)
#define FIFO_START_ADDR 0x08
#define FIFO_FINISH_ADDR 0x0c
#define FIFO_INT_ADDR 0x10
#define FIFO_STATUS1 0x14
-#define STATUS1_INT_STS(x) ((x) << 0)
+#define STATUS1_INT_STS GENMASK(7, 0)
#define FIFO_STATUS2 0x18
#define FIFO_INIT_ADDR 0x24
#define FIFO_CTRL2 0x28
diff --git a/sound/soc/meson/axg-frddr.c b/sound/soc/meson/axg-frddr.c
index 98140f449eb3..97ca0ea5faa5 100644
--- a/sound/soc/meson/axg-frddr.c
+++ b/sound/soc/meson/axg-frddr.c
@@ -59,8 +59,8 @@ static int axg_frddr_dai_hw_params(struct snd_pcm_substream *substream,
/* Trim the FIFO depth if the period is small to improve latency */
depth = min(period, fifo->depth);
val = (depth / AXG_FIFO_BURST) - 1;
- regmap_update_bits(fifo->map, FIFO_CTRL1, CTRL1_FRDDR_DEPTH_MASK,
- CTRL1_FRDDR_DEPTH(val));
+ regmap_update_bits(fifo->map, FIFO_CTRL1, CTRL1_FRDDR_DEPTH,
+ FIELD_PREP(CTRL1_FRDDR_DEPTH, val));
return 0;
}
diff --git a/sound/soc/meson/axg-toddr.c b/sound/soc/meson/axg-toddr.c
index 32ee45cce7f8..5b08b4e841ad 100644
--- a/sound/soc/meson/axg-toddr.c
+++ b/sound/soc/meson/axg-toddr.c
@@ -19,12 +19,9 @@
#define CTRL0_TODDR_EXT_SIGNED BIT(29)
#define CTRL0_TODDR_PP_MODE BIT(28)
#define CTRL0_TODDR_SYNC_CH BIT(27)
-#define CTRL0_TODDR_TYPE_MASK GENMASK(15, 13)
-#define CTRL0_TODDR_TYPE(x) ((x) << 13)
-#define CTRL0_TODDR_MSB_POS_MASK GENMASK(12, 8)
-#define CTRL0_TODDR_MSB_POS(x) ((x) << 8)
-#define CTRL0_TODDR_LSB_POS_MASK GENMASK(7, 3)
-#define CTRL0_TODDR_LSB_POS(x) ((x) << 3)
+#define CTRL0_TODDR_TYPE GENMASK(15, 13)
+#define CTRL0_TODDR_MSB_POS GENMASK(12, 8)
+#define CTRL0_TODDR_LSB_POS GENMASK(7, 3)
#define CTRL1_TODDR_FORCE_FINISH BIT(25)
#define CTRL1_SEL_SHIFT 28
@@ -76,12 +73,12 @@ static int axg_toddr_dai_hw_params(struct snd_pcm_substream *substream,
width = params_width(params);
regmap_update_bits(fifo->map, FIFO_CTRL0,
- CTRL0_TODDR_TYPE_MASK |
- CTRL0_TODDR_MSB_POS_MASK |
- CTRL0_TODDR_LSB_POS_MASK,
- CTRL0_TODDR_TYPE(type) |
- CTRL0_TODDR_MSB_POS(TODDR_MSB_POS) |
- CTRL0_TODDR_LSB_POS(TODDR_MSB_POS - (width - 1)));
+ CTRL0_TODDR_TYPE |
+ CTRL0_TODDR_MSB_POS |
+ CTRL0_TODDR_LSB_POS,
+ FIELD_PREP(CTRL0_TODDR_TYPE, type) |
+ FIELD_PREP(CTRL0_TODDR_MSB_POS, TODDR_MSB_POS) |
+ FIELD_PREP(CTRL0_TODDR_LSB_POS, TODDR_MSB_POS - (width - 1)));
return 0;
}
--
2.43.0
next prev parent reply other threads:[~2024-02-23 17:53 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-02-23 17:51 [PATCH 0/6] ASoC: meson: axg fixes and clean-up Jerome Brunet
2024-02-23 17:51 ` [PATCH 1/6] ASoC: meson: axg-tdm-interface: fix mclk setup without mclk-fs Jerome Brunet
2024-02-23 17:51 ` [PATCH 2/6] ASoC: meson: axg-tdm-interface: add frame rate constraint Jerome Brunet
2024-02-23 17:51 ` [PATCH 3/6] ASoC: meson: axg-tdm-interface: update error format error traces Jerome Brunet
2024-02-23 17:51 ` [PATCH 4/6] ASoC: meson: axg-spdifin: use max width for rate detection Jerome Brunet
2024-02-23 17:51 ` [PATCH 5/6] ASoC: meson: axg-fifo: take continuous rates Jerome Brunet
2024-02-23 17:51 ` Jerome Brunet [this message]
2024-02-26 15:42 ` [PATCH 6/6] ASoC: meson: axg-fifo: use FIELD helpers Mark Brown
2024-02-26 18:15 ` Jerome Brunet
2024-02-26 18:22 ` Mark Brown
2024-02-26 19:28 ` [PATCH 0/6] ASoC: meson: axg fixes and clean-up Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240223175116.2005407-7-jbrunet@baylibre.com \
--to=jbrunet@baylibre.com \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@kernel.org \
--cc=lgirdwood@gmail.com \
--cc=linux-amlogic@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).