From: Kalle Valo <kvalo@qca.qualcomm.com>
To: ath10k@lists.infradead.org
Cc: linux-wireless@vger.kernel.org
Subject: [PATCH v7 05/10] ath10k: various sdio related definitions
Date: Thu, 13 Apr 2017 11:29:51 +0300 [thread overview]
Message-ID: <149207219123.4590.11769261524266840078.stgit@potku.adurom.net> (raw)
In-Reply-To: <149207201649.4590.5821794186383265138.stgit@potku.adurom.net>
From: Erik Stromdahl <erik.stromdahl@gmail.com>
Debug masks for SDIO HIF layer.
Address definitions for SDIO/mbox based chipsets.
Augmented struct host_interest with more members.
Signed-off-by: Erik Stromdahl <erik.stromdahl@gmail.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
drivers/net/wireless/ath/ath10k/core.h | 3 ++
drivers/net/wireless/ath/ath10k/debug.h | 2 +
drivers/net/wireless/ath/ath10k/hw.h | 53 +++++++++++++++++++++++++++
drivers/net/wireless/ath/ath10k/targaddrs.h | 24 ++++++++++++
4 files changed, 82 insertions(+)
diff --git a/drivers/net/wireless/ath/ath10k/core.h b/drivers/net/wireless/ath/ath10k/core.h
index bf091514ecc6..8fc08a5043db 100644
--- a/drivers/net/wireless/ath/ath10k/core.h
+++ b/drivers/net/wireless/ath/ath10k/core.h
@@ -91,6 +91,7 @@ struct ath10k;
enum ath10k_bus {
ATH10K_BUS_PCI,
ATH10K_BUS_AHB,
+ ATH10K_BUS_SDIO,
};
static inline const char *ath10k_bus_str(enum ath10k_bus bus)
@@ -100,6 +101,8 @@ static inline const char *ath10k_bus_str(enum ath10k_bus bus)
return "pci";
case ATH10K_BUS_AHB:
return "ahb";
+ case ATH10K_BUS_SDIO:
+ return "sdio";
}
return "unknown";
diff --git a/drivers/net/wireless/ath/ath10k/debug.h b/drivers/net/wireless/ath/ath10k/debug.h
index 2368f47314ae..257d10985c6e 100644
--- a/drivers/net/wireless/ath/ath10k/debug.h
+++ b/drivers/net/wireless/ath/ath10k/debug.h
@@ -38,6 +38,8 @@ enum ath10k_debug_mask {
ATH10K_DBG_WMI_PRINT = 0x00002000,
ATH10K_DBG_PCI_PS = 0x00004000,
ATH10K_DBG_AHB = 0x00008000,
+ ATH10K_DBG_SDIO = 0x00010000,
+ ATH10K_DBG_SDIO_DUMP = 0x00020000,
ATH10K_DBG_ANY = 0xffffffff,
};
diff --git a/drivers/net/wireless/ath/ath10k/hw.h b/drivers/net/wireless/ath/ath10k/hw.h
index 8aca62bca348..977839f30bf5 100644
--- a/drivers/net/wireless/ath/ath10k/hw.h
+++ b/drivers/net/wireless/ath/ath10k/hw.h
@@ -857,6 +857,59 @@ ath10k_rx_desc_get_l3_pad_bytes(struct ath10k_hw_params *hw,
#define QCA9887_EEPROM_ADDR_LO_MASK 0x00ff0000
#define QCA9887_EEPROM_ADDR_LO_LSB 16
+#define MBOX_RESET_CONTROL_ADDRESS 0x00000000
+#define MBOX_HOST_INT_STATUS_ADDRESS 0x00000800
+#define MBOX_HOST_INT_STATUS_ERROR_LSB 7
+#define MBOX_HOST_INT_STATUS_ERROR_MASK 0x00000080
+#define MBOX_HOST_INT_STATUS_CPU_LSB 6
+#define MBOX_HOST_INT_STATUS_CPU_MASK 0x00000040
+#define MBOX_HOST_INT_STATUS_COUNTER_LSB 4
+#define MBOX_HOST_INT_STATUS_COUNTER_MASK 0x00000010
+#define MBOX_CPU_INT_STATUS_ADDRESS 0x00000801
+#define MBOX_ERROR_INT_STATUS_ADDRESS 0x00000802
+#define MBOX_ERROR_INT_STATUS_WAKEUP_LSB 2
+#define MBOX_ERROR_INT_STATUS_WAKEUP_MASK 0x00000004
+#define MBOX_ERROR_INT_STATUS_RX_UNDERFLOW_LSB 1
+#define MBOX_ERROR_INT_STATUS_RX_UNDERFLOW_MASK 0x00000002
+#define MBOX_ERROR_INT_STATUS_TX_OVERFLOW_LSB 0
+#define MBOX_ERROR_INT_STATUS_TX_OVERFLOW_MASK 0x00000001
+#define MBOX_COUNTER_INT_STATUS_ADDRESS 0x00000803
+#define MBOX_COUNTER_INT_STATUS_COUNTER_LSB 0
+#define MBOX_COUNTER_INT_STATUS_COUNTER_MASK 0x000000ff
+#define MBOX_RX_LOOKAHEAD_VALID_ADDRESS 0x00000805
+#define MBOX_INT_STATUS_ENABLE_ADDRESS 0x00000828
+#define MBOX_INT_STATUS_ENABLE_ERROR_LSB 7
+#define MBOX_INT_STATUS_ENABLE_ERROR_MASK 0x00000080
+#define MBOX_INT_STATUS_ENABLE_CPU_LSB 6
+#define MBOX_INT_STATUS_ENABLE_CPU_MASK 0x00000040
+#define MBOX_INT_STATUS_ENABLE_INT_LSB 5
+#define MBOX_INT_STATUS_ENABLE_INT_MASK 0x00000020
+#define MBOX_INT_STATUS_ENABLE_COUNTER_LSB 4
+#define MBOX_INT_STATUS_ENABLE_COUNTER_MASK 0x00000010
+#define MBOX_INT_STATUS_ENABLE_MBOX_DATA_LSB 0
+#define MBOX_INT_STATUS_ENABLE_MBOX_DATA_MASK 0x0000000f
+#define MBOX_CPU_INT_STATUS_ENABLE_ADDRESS 0x00000819
+#define MBOX_CPU_INT_STATUS_ENABLE_BIT_LSB 0
+#define MBOX_CPU_INT_STATUS_ENABLE_BIT_MASK 0x000000ff
+#define MBOX_ERROR_STATUS_ENABLE_ADDRESS 0x0000081a
+#define MBOX_ERROR_STATUS_ENABLE_RX_UNDERFLOW_LSB 1
+#define MBOX_ERROR_STATUS_ENABLE_RX_UNDERFLOW_MASK 0x00000002
+#define MBOX_ERROR_STATUS_ENABLE_TX_OVERFLOW_LSB 0
+#define MBOX_ERROR_STATUS_ENABLE_TX_OVERFLOW_MASK 0x00000001
+#define MBOX_COUNTER_INT_STATUS_ENABLE_ADDRESS 0x0000081b
+#define MBOX_COUNTER_INT_STATUS_ENABLE_BIT_LSB 0
+#define MBOX_COUNTER_INT_STATUS_ENABLE_BIT_MASK 0x000000ff
+#define MBOX_COUNT_ADDRESS 0x00000820
+#define MBOX_COUNT_DEC_ADDRESS 0x00000840
+#define MBOX_WINDOW_DATA_ADDRESS 0x00000874
+#define MBOX_WINDOW_WRITE_ADDR_ADDRESS 0x00000878
+#define MBOX_WINDOW_READ_ADDR_ADDRESS 0x0000087c
+#define MBOX_CPU_DBG_SEL_ADDRESS 0x00000883
+#define MBOX_CPU_DBG_ADDRESS 0x00000884
+#define MBOX_RTC_BASE_ADDRESS 0x00000000
+#define MBOX_GPIO_BASE_ADDRESS 0x00005000
+#define MBOX_MBOX_BASE_ADDRESS 0x00008000
+
#define RTC_STATE_V_GET(x) (((x) & RTC_STATE_V_MASK) >> RTC_STATE_V_LSB)
/* Register definitions for first generation ath10k cards. These cards include
diff --git a/drivers/net/wireless/ath/ath10k/targaddrs.h b/drivers/net/wireless/ath/ath10k/targaddrs.h
index cbac9e4252d6..8bded5da9d0d 100644
--- a/drivers/net/wireless/ath/ath10k/targaddrs.h
+++ b/drivers/net/wireless/ath/ath10k/targaddrs.h
@@ -205,6 +205,24 @@ struct host_interest {
*/
/* Bit 1 - unused */
u32 hi_fw_swap; /* 0x104 */
+
+ /* global arenas pointer address, used by host driver debug */
+ u32 hi_dynamic_mem_arenas_addr; /* 0x108 */
+
+ /* allocated bytes of DRAM use by allocated */
+ u32 hi_dynamic_mem_allocated; /* 0x10C */
+
+ /* remaining bytes of DRAM */
+ u32 hi_dynamic_mem_remaining; /* 0x110 */
+
+ /* memory track count, configured by host */
+ u32 hi_dynamic_mem_track_max; /* 0x114 */
+
+ /* minidump buffer */
+ u32 hi_minidump; /* 0x118 */
+
+ /* bdata's sig and key addr */
+ u32 hi_bd_sig_key; /* 0x11c */
} __packed;
#define HI_ITEM(item) offsetof(struct host_interest, item)
@@ -319,6 +337,12 @@ struct host_interest {
#define HI_ACS_FLAGS_USE_WWAN (1 << 1)
/* Use test VAP */
#define HI_ACS_FLAGS_TEST_VAP (1 << 2)
+/* SDIO/mailbox ACS flag definitions */
+#define HI_ACS_FLAGS_SDIO_SWAP_MAILBOX_SET (1 << 0)
+#define HI_ACS_FLAGS_SDIO_REDUCE_TX_COMPL_SET (1 << 1)
+#define HI_ACS_FLAGS_ALT_DATA_CREDIT_SIZE (1 << 2)
+#define HI_ACS_FLAGS_SDIO_SWAP_MAILBOX_FW_ACK (1 << 16)
+#define HI_ACS_FLAGS_SDIO_REDUCE_TX_COMPL_FW_ACK (1 << 17)
/*
* CONSOLE FLAGS
_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k
next prev parent reply other threads:[~2017-04-13 8:30 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-04-13 8:28 [PATCH v7 00/10] ath10k: sdio support Kalle Valo
2017-04-13 8:28 ` [PATCH v7 01/10] ath10k: htc: made static function public Kalle Valo
2017-05-04 12:57 ` [v7,01/10] " Kalle Valo
2017-04-13 8:29 ` [PATCH v7 02/10] ath10k: htc: rx trailer lookahead support Kalle Valo
2017-04-13 8:29 ` [PATCH v7 03/10] ath10k: htc: move htc ctrl ep connect to htc_init Kalle Valo
2017-04-13 8:29 ` [PATCH v7 04/10] ath10k: htc: refactorization Kalle Valo
2017-04-13 8:29 ` Kalle Valo [this message]
2017-04-13 8:30 ` [PATCH v7 06/10] ath10k: add sdio extra initializations Kalle Valo
2017-04-13 8:30 ` [PATCH v7 07/10] ath10k: sdio get target info Kalle Valo
2017-04-13 8:30 ` [PATCH v7 08/10] ath10k: htc: ready_ext msg support Kalle Valo
2017-04-13 8:30 ` [PATCH v7 09/10] ath10k: different fw file name for sdio Kalle Valo
2017-04-13 8:31 ` [PATCH v7 10/10] ath10k: add initial SDIO support Kalle Valo
2017-04-22 19:35 ` [PATCH v7 00/10] ath10k: sdio support Erik Stromdahl
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=149207219123.4590.11769261524266840078.stgit@potku.adurom.net \
--to=kvalo@qca.qualcomm.com \
--cc=ath10k@lists.infradead.org \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).