From: Tamizh chelvam <tamizhr@codeaurora.org>
To: ath10k@lists.infradead.org
Cc: linux-wireless@vger.kernel.org, Tamizh Chelvam <tamizhr@codeaurora.org>
Subject: [PATCH] ath10k: Add new debug_mask for sta related logs
Date: Fri, 5 Feb 2021 00:05:38 +0530 [thread overview]
Message-ID: <1612463738-16542-1-git-send-email-tamizhr@codeaurora.org> (raw)
From: Tamizh Chelvam <tamizhr@codeaurora.org>
Add new enum ATH10K_DBG_STA debug_mask for printing
sta related logs. This will be useful to check the
debug logs of connection and changes related to
station.
Tested-on: QCA9984 hw1.0 PCI 10.4-3.9.0.2-00021
Signed-off-by: Tamizh Chelvam <tamizhr@codeaurora.org>
---
drivers/net/wireless/ath/ath10k/debug.h | 1 +
drivers/net/wireless/ath/ath10k/mac.c | 20 ++++++++++----------
drivers/net/wireless/ath/ath10k/wmi.c | 4 ++--
3 files changed, 13 insertions(+), 12 deletions(-)
diff --git a/drivers/net/wireless/ath/ath10k/debug.h b/drivers/net/wireless/ath/ath10k/debug.h
index 997c1c8..0af787f 100644
--- a/drivers/net/wireless/ath/ath10k/debug.h
+++ b/drivers/net/wireless/ath/ath10k/debug.h
@@ -34,6 +34,7 @@ enum ath10k_debug_mask {
ATH10K_DBG_USB_BULK = 0x00080000,
ATH10K_DBG_SNOC = 0x00100000,
ATH10K_DBG_QMI = 0x00200000,
+ ATH10K_DBG_STA = 0x00400000,
ATH10K_DBG_ANY = 0xffffffff,
};
diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index d403c9f..b6836ef 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -6667,7 +6667,7 @@ static void ath10k_sta_rc_update_wk(struct work_struct *wk)
enum wmi_phy_mode mode;
mode = chan_to_phymode(&def);
- ath10k_dbg(ar, ATH10K_DBG_MAC, "mac update sta %pM peer bw %d phymode %d\n",
+ ath10k_dbg(ar, ATH10K_DBG_STA, "mac update sta %pM peer bw %d phymode %d\n",
sta->addr, bw, mode);
err = ath10k_wmi_peer_set_param(ar, arvif->vdev_id, sta->addr,
@@ -6686,7 +6686,7 @@ static void ath10k_sta_rc_update_wk(struct work_struct *wk)
}
if (changed & IEEE80211_RC_NSS_CHANGED) {
- ath10k_dbg(ar, ATH10K_DBG_MAC, "mac update sta %pM nss %d\n",
+ ath10k_dbg(ar, ATH10K_DBG_STA, "mac update sta %pM nss %d\n",
sta->addr, nss);
err = ath10k_wmi_peer_set_param(ar, arvif->vdev_id, sta->addr,
@@ -6697,7 +6697,7 @@ static void ath10k_sta_rc_update_wk(struct work_struct *wk)
}
if (changed & IEEE80211_RC_SMPS_CHANGED) {
- ath10k_dbg(ar, ATH10K_DBG_MAC, "mac update sta %pM smps %d\n",
+ ath10k_dbg(ar, ATH10K_DBG_STA, "mac update sta %pM smps %d\n",
sta->addr, smps);
err = ath10k_wmi_peer_set_param(ar, arvif->vdev_id, sta->addr,
@@ -6708,7 +6708,7 @@ static void ath10k_sta_rc_update_wk(struct work_struct *wk)
}
if (changed & IEEE80211_RC_SUPP_RATES_CHANGED) {
- ath10k_dbg(ar, ATH10K_DBG_MAC, "mac update sta %pM supp rates\n",
+ ath10k_dbg(ar, ATH10K_DBG_STA, "mac update sta %pM supp rates\n",
sta->addr);
err = ath10k_station_assoc(ar, arvif->vif, sta, true);
@@ -7404,7 +7404,7 @@ static int ath10k_sta_state(struct ieee80211_hw *hw,
enum wmi_peer_type peer_type = WMI_PEER_TYPE_DEFAULT;
u32 num_tdls_stations;
- ath10k_dbg(ar, ATH10K_DBG_MAC,
+ ath10k_dbg(ar, ATH10K_DBG_STA,
"mac vdev %d peer create %pM (new sta) sta %d / %d peer %d / %d\n",
arvif->vdev_id, sta->addr,
ar->num_stations + 1, ar->max_num_stations,
@@ -7504,7 +7504,7 @@ static int ath10k_sta_state(struct ieee80211_hw *hw,
/*
* Existing station deletion.
*/
- ath10k_dbg(ar, ATH10K_DBG_MAC,
+ ath10k_dbg(ar, ATH10K_DBG_STA,
"mac vdev %d peer delete %pM sta %pK (sta gone)\n",
arvif->vdev_id, sta->addr, sta);
@@ -7576,7 +7576,7 @@ static int ath10k_sta_state(struct ieee80211_hw *hw,
/*
* New association.
*/
- ath10k_dbg(ar, ATH10K_DBG_MAC, "mac sta %pM associated\n",
+ ath10k_dbg(ar, ATH10K_DBG_STA, "mac sta %pM associated\n",
sta->addr);
ret = ath10k_station_assoc(ar, vif, sta, false);
@@ -7589,7 +7589,7 @@ static int ath10k_sta_state(struct ieee80211_hw *hw,
/*
* Tdls station authorized.
*/
- ath10k_dbg(ar, ATH10K_DBG_MAC, "mac tdls sta %pM authorized\n",
+ ath10k_dbg(ar, ATH10K_DBG_STA, "mac tdls sta %pM authorized\n",
sta->addr);
ret = ath10k_station_assoc(ar, vif, sta, false);
@@ -7612,7 +7612,7 @@ static int ath10k_sta_state(struct ieee80211_hw *hw,
/*
* Disassociation.
*/
- ath10k_dbg(ar, ATH10K_DBG_MAC, "mac sta %pM disassociated\n",
+ ath10k_dbg(ar, ATH10K_DBG_STA, "mac sta %pM disassociated\n",
sta->addr);
ret = ath10k_station_disassoc(ar, vif, sta);
@@ -8429,7 +8429,7 @@ static void ath10k_sta_rc_update(struct ieee80211_hw *hw,
return;
}
- ath10k_dbg(ar, ATH10K_DBG_MAC,
+ ath10k_dbg(ar, ATH10K_DBG_STA,
"mac sta rc update for %pM changed %08x bw %d nss %d smps %d\n",
sta->addr, changed, sta->bandwidth, sta->rx_nss,
sta->smps_mode);
diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c
index 29f6431..d48b922 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.c
+++ b/drivers/net/wireless/ath/ath10k/wmi.c
@@ -3497,7 +3497,7 @@ void ath10k_wmi_event_peer_sta_kickout(struct ath10k *ar, struct sk_buff *skb)
return;
}
- ath10k_dbg(ar, ATH10K_DBG_WMI, "wmi event peer sta kickout %pM\n",
+ ath10k_dbg(ar, ATH10K_DBG_STA, "wmi event peer sta kickout %pM\n",
arg.mac_addr);
rcu_read_lock();
@@ -7506,7 +7506,7 @@ ath10k_wmi_op_gen_set_sta_ps(struct ath10k *ar, u32 vdev_id,
cmd->param_id = __cpu_to_le32(param_id);
cmd->param_value = __cpu_to_le32(value);
- ath10k_dbg(ar, ATH10K_DBG_WMI,
+ ath10k_dbg(ar, ATH10K_DBG_STA,
"wmi sta ps param vdev_id 0x%x param %d value %d\n",
vdev_id, param_id, value);
return skb;
--
2.7.4
_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k
next reply other threads:[~2021-02-04 18:36 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-02-04 18:35 Tamizh chelvam [this message]
2021-02-09 7:25 ` [PATCH] ath10k: Add new debug_mask for sta related logs Kalle Valo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1612463738-16542-1-git-send-email-tamizhr@codeaurora.org \
--to=tamizhr@codeaurora.org \
--cc=ath10k@lists.infradead.org \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).