From: "Toke Høiland-Jørgensen" <toke@redhat.com>
To: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>,
Andrii Nakryiko <andriin@fb.com>,
"David S. Miller" <davem@davemloft.net>,
Andrey Ignatov <rdna@fb.com>, Networking <netdev@vger.kernel.org>,
bpf <bpf@vger.kernel.org>
Subject: Re: bpf: ability to attach freplace to multiple parents
Date: Fri, 03 Apr 2020 10:38:38 +0200 [thread overview]
Message-ID: <87ftdldkvl.fsf@toke.dk> (raw)
In-Reply-To: <20200402215452.dkkbbymnhzlcux7m@ast-mbp>
Alexei Starovoitov <alexei.starovoitov@gmail.com> writes:
> It's a different link.
> For fentry/fexit/freplace the link is pair:
> // target ... bpf_prog
> (target_prog_fd_or_vmlinux, fentry_exit_replace_prog_fd).
>
> So for xdp case we will have:
> root_link = (eth0_ifindex, dispatcher_prog_fd) // dispatcher prog attached to eth0
> link1 = (dispatcher_prog_fd, xdp_firewall1_fd) // 1st extension prog attached to dispatcher
> link2 = (dispatcher_prog_fd, xdp_firewall2_fd) // 2nd extension prog attached to dispatcher
>
> Now libxdp wants to update the dispatcher prog.
> It generates new dispatcher prog with more placeholder entries or new policy:
> new_dispatcher_prog_fd.
> It's not attached anywhere.
> Then libxdp calls new bpf_raw_tp_open() api I'm proposing above to create:
> link3 = (new_dispatcher_prog_fd, xdp_firewall1_fd)
> link4 = (new_dispatcher_prog_fd, xdp_firewall2_fd)
> Now we have two firewalls attached to both old dispatcher prog and new dispatcher prog.
> Both firewalls are executing via old dispatcher prog that is active.
> Now libxdp calls:
> bpf_link_udpate(root_link, dispatcher_prog_fd, new_dispatcher_prog_fd)
> which atomically replaces old dispatcher prog with new dispatcher prog in eth0.
> The traffic keeps flowing into both firewalls. No packets lost.
> But now it goes through new dipsatcher prog.
> libxdp can now:
> close(dispatcher_prog_fd);
> close(link1);
> close(link2);
> Closing (and destroying two links) will remove old dispatcher prog
> from linked list in xdp_firewall1_prog->aux->linked_prog_list and from
> xdp_firewall2_prog->aux->linked_prog_list.
> Notice that there is no need to explicitly detach old dispatcher prog from eth0.
> link_update() did it while replacing it with new dispatcher prog.
Yeah, this was the flow I had in mind already. However, what I meant was
that *from the PoV of an application consuming the link fd*, this would
lead to dangling links.
I.e., an application does:
app1_link_fd = libxdp_install_prog(prog1);
and stores link_fd somewhere (just holds on to it, or pins it
somewhere).
Then later, another application does:
app2_link_fd = libxdp_install_prog(prog2);
but this has the side-effect of replacing the dispatcher, so
app1_link_fd is now no longer valid.
This can be worked around, of course (e.g., just return the prog_fd and
hide any link_fd details inside the library), but if the point of
bpf_link is that the application could hold on to it and use it for
subsequent replacements, that would be nice to have for consumers of the
library as well, no?
-Toke
next prev parent reply other threads:[~2020-04-03 8:38 UTC|newest]
Thread overview: 120+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-03-19 13:13 [PATCH bpf-next 0/4] XDP: Support atomic replacement of XDP interface attachments Toke Høiland-Jørgensen
2020-03-19 13:13 ` [PATCH bpf-next 1/4] xdp: Support specifying expected existing program when attaching XDP Toke Høiland-Jørgensen
2020-03-19 22:52 ` Jakub Kicinski
2020-03-20 8:48 ` Toke Høiland-Jørgensen
2020-03-20 17:35 ` Jakub Kicinski
2020-03-20 18:17 ` Toke Høiland-Jørgensen
2020-03-20 18:35 ` Jakub Kicinski
2020-03-20 18:30 ` John Fastabend
2020-03-20 20:24 ` Andrii Nakryiko
2020-03-23 11:24 ` Toke Høiland-Jørgensen
2020-03-23 16:54 ` Jakub Kicinski
2020-03-23 18:14 ` Andrii Nakryiko
2020-03-23 19:23 ` Toke Høiland-Jørgensen
2020-03-24 1:01 ` David Ahern
2020-03-24 4:53 ` Andrii Nakryiko
2020-03-24 20:55 ` David Ahern
2020-03-24 22:56 ` Andrii Nakryiko
2020-03-24 5:00 ` Andrii Nakryiko
2020-03-24 10:57 ` Toke Høiland-Jørgensen
2020-03-24 18:53 ` Jakub Kicinski
2020-03-24 22:30 ` Andrii Nakryiko
2020-03-25 1:25 ` Jakub Kicinski
2020-03-24 19:22 ` John Fastabend
2020-03-25 1:36 ` Alexei Starovoitov
2020-03-25 2:15 ` Jakub Kicinski
2020-03-25 18:06 ` Alexei Starovoitov
2020-03-25 18:20 ` Jakub Kicinski
2020-03-25 19:14 ` Alexei Starovoitov
2020-03-25 10:42 ` Toke Høiland-Jørgensen
2020-03-25 18:11 ` Alexei Starovoitov
2020-03-25 10:30 ` Toke Høiland-Jørgensen
2020-03-25 17:56 ` Alexei Starovoitov
2020-03-24 22:25 ` Andrii Nakryiko
2020-03-25 9:38 ` Toke Høiland-Jørgensen
2020-03-25 17:55 ` Alexei Starovoitov
2020-03-26 0:16 ` Andrii Nakryiko
2020-03-26 5:13 ` Jakub Kicinski
2020-03-26 18:09 ` Andrii Nakryiko
2020-03-26 19:40 ` Alexei Starovoitov
2020-03-26 20:05 ` Edward Cree
2020-03-27 11:09 ` Lorenz Bauer
2020-03-27 23:11 ` Alexei Starovoitov
2020-03-26 10:04 ` Lorenz Bauer
2020-03-26 17:47 ` Jakub Kicinski
2020-03-26 19:45 ` Alexei Starovoitov
2020-03-26 18:18 ` Andrii Nakryiko
2020-03-26 19:53 ` Alexei Starovoitov
2020-03-27 11:11 ` Toke Høiland-Jørgensen
2020-04-02 20:21 ` bpf: ability to attach freplace to multiple parents Alexei Starovoitov
2020-04-02 21:23 ` Toke Høiland-Jørgensen
2020-04-02 21:54 ` Alexei Starovoitov
2020-04-03 8:38 ` Toke Høiland-Jørgensen [this message]
2020-04-07 1:44 ` Alexei Starovoitov
2020-04-07 9:20 ` Toke Høiland-Jørgensen
2020-05-12 8:34 ` Toke Høiland-Jørgensen
2020-05-12 9:53 ` Alan Maguire
2020-05-12 13:02 ` Toke Høiland-Jørgensen
2020-05-12 23:18 ` Alexei Starovoitov
2020-05-12 23:06 ` Alexei Starovoitov
2020-05-13 10:25 ` Toke Høiland-Jørgensen
2020-04-02 21:24 ` Andrey Ignatov
2020-04-02 22:01 ` Alexei Starovoitov
2020-03-26 12:35 ` [PATCH bpf-next 1/4] xdp: Support specifying expected existing program when attaching XDP Toke Høiland-Jørgensen
2020-03-26 19:06 ` Andrii Nakryiko
2020-03-27 11:06 ` Lorenz Bauer
2020-03-27 16:12 ` David Ahern
2020-03-27 20:10 ` Andrii Nakryiko
2020-03-27 23:02 ` Alexei Starovoitov
2020-03-30 15:25 ` Edward Cree
2020-03-31 3:43 ` Alexei Starovoitov
2020-03-31 22:05 ` Edward Cree
2020-03-31 22:16 ` Alexei Starovoitov
2020-03-27 19:42 ` Andrii Nakryiko
2020-03-27 19:45 ` Andrii Nakryiko
2020-03-27 23:09 ` Alexei Starovoitov
2020-03-27 11:46 ` Toke Høiland-Jørgensen
2020-03-27 20:07 ` Andrii Nakryiko
2020-03-27 22:16 ` Toke Høiland-Jørgensen
2020-03-27 22:54 ` Andrii Nakryiko
2020-03-28 1:09 ` Toke Høiland-Jørgensen
2020-03-28 1:44 ` Andrii Nakryiko
2020-03-28 19:43 ` Toke Høiland-Jørgensen
2020-03-26 19:58 ` Alexei Starovoitov
2020-03-27 12:06 ` Toke Høiland-Jørgensen
2020-03-27 23:00 ` Alexei Starovoitov
2020-03-28 1:43 ` Toke Høiland-Jørgensen
2020-03-28 2:26 ` Alexei Starovoitov
2020-03-28 19:34 ` Toke Høiland-Jørgensen
2020-03-28 23:35 ` Alexei Starovoitov
2020-03-29 10:39 ` Toke Høiland-Jørgensen
2020-03-29 19:26 ` Alexei Starovoitov
2020-03-30 10:19 ` Toke Høiland-Jørgensen
2020-03-29 20:23 ` Andrii Nakryiko
2020-03-30 13:53 ` Toke Høiland-Jørgensen
2020-03-30 20:17 ` Andrii Nakryiko
2020-03-31 10:13 ` Toke Høiland-Jørgensen
2020-03-31 13:48 ` Daniel Borkmann
2020-03-31 15:00 ` Toke Høiland-Jørgensen
2020-03-31 20:19 ` Andrii Nakryiko
2020-03-31 20:15 ` Andrii Nakryiko
2020-03-30 15:41 ` Edward Cree
2020-03-30 19:13 ` Jakub Kicinski
2020-03-31 4:01 ` Alexei Starovoitov
2020-03-31 11:34 ` Toke Høiland-Jørgensen
2020-03-31 18:52 ` Alexei Starovoitov
2020-03-20 20:30 ` Daniel Borkmann
2020-03-20 20:40 ` Daniel Borkmann
2020-03-20 21:30 ` Jakub Kicinski
2020-03-20 21:55 ` Daniel Borkmann
2020-03-20 23:35 ` Jakub Kicinski
2020-03-20 20:39 ` Andrii Nakryiko
2020-03-23 11:25 ` Toke Høiland-Jørgensen
2020-03-23 18:07 ` Andrii Nakryiko
2020-03-23 23:54 ` Andrey Ignatov
2020-03-24 10:16 ` Toke Høiland-Jørgensen
2020-03-20 2:13 ` Yonghong Song
2020-03-20 8:48 ` Toke Høiland-Jørgensen
2020-03-19 13:13 ` [PATCH bpf-next 2/4] tools: Add EXPECTED_FD-related definitions in if_link.h Toke Høiland-Jørgensen
2020-03-19 13:13 ` [PATCH bpf-next 3/4] libbpf: Add function to set link XDP fd while specifying old fd Toke Høiland-Jørgensen
2020-03-19 13:13 ` [PATCH bpf-next 4/4] selftests/bpf: Add tests for attaching XDP programs Toke Høiland-Jørgensen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87ftdldkvl.fsf@toke.dk \
--to=toke@redhat.com \
--cc=alexei.starovoitov@gmail.com \
--cc=andriin@fb.com \
--cc=bpf@vger.kernel.org \
--cc=daniel@iogearbox.net \
--cc=davem@davemloft.net \
--cc=netdev@vger.kernel.org \
--cc=rdna@fb.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).