From: Geert Uytterhoeven <geert+renesas@glider.be>

commit 30cc0ed73e3390af7c5573b159826e8162f09fe7 upstream.

All R-Car platforms use DT for describing CAN controllers. R-Car CAN
platform data support was never used in any upstream kernel.

Move the Clock Select Register settings enum into the driver, and remove
platform data support and the corresponding header file.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
---
 drivers/net/can/rcar/rcar_can.c       | 22 +++++++++-------------
 include/linux/can/platform/rcar_can.h | 18 ------------------
 2 files changed, 9 insertions(+), 31 deletions(-)
 delete mode 100644 include/linux/can/platform/rcar_can.h

diff --git a/drivers/net/can/rcar/rcar_can.c b/drivers/net/can/rcar/rcar_can.c
index 771a46083739..bfb674193a21 100644
--- a/drivers/net/can/rcar/rcar_can.c
+++ b/drivers/net/can/rcar/rcar_can.c
@@ -19,11 +19,17 @@
 #include <linux/can/led.h>
 #include <linux/can/dev.h>
 #include <linux/clk.h>
-#include <linux/can/platform/rcar_can.h>
 #include <linux/of.h>
 
 #define RCAR_CAN_DRV_NAME	"rcar_can"
 
+/* Clock Select Register settings */
+enum CLKR {
+	CLKR_CLKP1 = 0, /* Peripheral clock (clkp1) */
+	CLKR_CLKP2 = 1, /* Peripheral clock (clkp2) */
+	CLKR_CLKEXT = 3, /* Externally input clock */
+};
+
 #define RCAR_SUPPORTED_CLOCKS	(BIT(CLKR_CLKP1) | BIT(CLKR_CLKP2) | \
 				 BIT(CLKR_CLKEXT))
 
@@ -740,7 +746,6 @@ static const char * const clock_names[] = {
 
 static int rcar_can_probe(struct platform_device *pdev)
 {
-	struct rcar_can_platform_data *pdata;
 	struct rcar_can_priv *priv;
 	struct net_device *ndev;
 	struct resource *mem;
@@ -749,17 +754,8 @@ static int rcar_can_probe(struct platform_device *pdev)
 	int err = -ENODEV;
 	int irq;
 
-	if (pdev->dev.of_node) {
-		of_property_read_u32(pdev->dev.of_node,
-				     "renesas,can-clock-select", &clock_select);
-	} else {
-		pdata = dev_get_platdata(&pdev->dev);
-		if (!pdata) {
-			dev_err(&pdev->dev, "No platform data provided!\n");
-			goto fail;
-		}
-		clock_select = pdata->clock_select;
-	}
+	of_property_read_u32(pdev->dev.of_node, "renesas,can-clock-select",
+			     &clock_select);
 
 	irq = platform_get_irq(pdev, 0);
 	if (irq < 0) {
diff --git a/include/linux/can/platform/rcar_can.h b/include/linux/can/platform/rcar_can.h
deleted file mode 100644
index a43dcd0cf79e..000000000000
--- a/include/linux/can/platform/rcar_can.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef _CAN_PLATFORM_RCAR_CAN_H_
-#define _CAN_PLATFORM_RCAR_CAN_H_
-
-#include <linux/types.h>
-
-/* Clock Select Register settings */
-enum CLKR {
-	CLKR_CLKP1 = 0,	/* Peripheral clock (clkp1) */
-	CLKR_CLKP2 = 1,	/* Peripheral clock (clkp2) */
-	CLKR_CLKEXT = 3	/* Externally input clock */
-};
-
-struct rcar_can_platform_data {
-	enum CLKR clock_select;	/* Clock source select */
-};
-
-#endif	/* !_CAN_PLATFORM_RCAR_CAN_H_ */
-- 
2.17.1