Hi!

> With this commit the sensor is able to enter LP-11 mode during power up,
> as expected by some CSI-2 controllers.
> 
> [1] https://publiclab.org/system/images/photos/000/023/294/original/
> RASPBERRY_PI_CAMERA_V2_DATASHEET_IMX219PQH5_7.0.0_Datasheet_XXX.PDF
> 
> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> Acked-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> ---
>  drivers/media/i2c/imx219.c | 17 +++++++++++++++++
>  1 file changed, 17 insertions(+)
> 
> diff --git a/drivers/media/i2c/imx219.c b/drivers/media/i2c/imx219.c
> index c67b2cf5c32c..f1ae93569542 100644
> --- a/drivers/media/i2c/imx219.c
> +++ b/drivers/media/i2c/imx219.c
> @@ -1224,6 +1224,23 @@ static int imx219_probe(struct i2c_client *client)
>  	/* Set default mode to max resolution */
>  	imx219->mode = &supported_modes[0];
>  
> +	/* sensor doesn't enter LP-11 state upon power up until and unless
> +	 * streaming is started, so upon power up switch the modes to:
> +	 * streaming -> standby
> +	 */

/*
 * Sensor...

would be the usual commment style.

Best regards,
								Pavel
								
-- 
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany