dmaengine.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Robin Gong <yibin.gong@nxp.com>
To: vkoul@kernel.org, robh+dt@kernel.org, shawnguo@kernel.org,
	s.hauer@pengutronix.de, festevam@gmail.com,
	catalin.marinas@arm.com, will@kernel.org,
	dan.j.williams@intel.com, angelo@sysam.it
Cc: kernel@pengutronix.de, linux-imx@nxp.com,
	dmaengine@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 6/9] dt-bindings: dma: add fsl-edma3 yaml
Date: Wed, 15 Jul 2020 01:41:45 +0800	[thread overview]
Message-ID: <1594748508-22179-7-git-send-email-yibin.gong@nxp.com> (raw)
In-Reply-To: <1594748508-22179-1-git-send-email-yibin.gong@nxp.com>

Add device binding doc for fsl-edma3 driver.

Signed-off-by: Robin Gong <yibin.gong@nxp.com>
---
 .../devicetree/bindings/dma/nxp,fsl-edma3.yaml     | 134 +++++++++++++++++++++
 1 file changed, 134 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/dma/nxp,fsl-edma3.yaml

diff --git a/Documentation/devicetree/bindings/dma/nxp,fsl-edma3.yaml b/Documentation/devicetree/bindings/dma/nxp,fsl-edma3.yaml
new file mode 100644
index 00000000..ebdad90
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/nxp,fsl-edma3.yaml
@@ -0,0 +1,134 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/nxp,fsl-edma3.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP eDMA3 Controller
+
+maintainers:
+  - Robin Gong <yibin.gong@nxp.com>
+
+allOf:
+  - $ref: "dma-controller.yaml#"
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - fsl,imx8qm-edma  # i.mx8qm/qxp
+
+  reg:
+    minItems: 2
+    maxItems: 32
+
+  interrupts:
+    minItems: 2
+    maxItems: 32
+
+  interrupt-names:
+    minItems: 2
+    maxItems: 32
+    items:
+      - pattern: "^edma[0-2]-chan([0-9]|[1-2][0-9]|3[0-1])-tx|rx+$"
+      - pattern: "^edma[0-2]-chan([0-9]|[1-2][0-9]|3[0-1])-tx|rx+$"
+      - pattern: "^edma[0-2]-chan([0-9]|[1-2][0-9]|3[0-1])-tx|rx+$"
+      - pattern: "^edma[0-2]-chan([0-9]|[1-2][0-9]|3[0-1])-tx|rx+$"
+      - pattern: "^edma[0-2]-chan([0-9]|[1-2][0-9]|3[0-1])-tx|rx+$"
+      - pattern: "^edma[0-2]-chan([0-9]|[1-2][0-9]|3[0-1])-tx|rx+$"
+      - pattern: "^edma[0-2]-chan([0-9]|[1-2][0-9]|3[0-1])-tx|rx+$"
+      - pattern: "^edma[0-2]-chan([0-9]|[1-2][0-9]|3[0-1])-tx|rx+$"
+
+  '#dma-cells':
+    const: 3
+    description: |
+      The 1st cell specifies the channel ID.
+
+      The 2nd cell specifies the channel priority.
+
+      The 3rd cell specifies the channel attributes:
+        bit0 transmit or receive.
+          0 = transmit
+          1 = receive
+        bit1 local or remote access.
+          0 = local
+          1 = remote
+        bit2 dualfifo case or not(only in Audio cyclic now).
+          0 = not dual fifo case
+          1 =  dualfifo case.
+
+  dma-channels:
+    minimum: 2
+    maximum: 32
+
+  power-domains:
+    minItems: 2
+    maxItems: 32
+
+  power-domain-names:
+    minItems: 2
+    maxItems: 32
+    items:
+      - pattern: "^edma[0-2]-chan([0-9]|[1-2][0-9]|3[0-1])+$"
+      - pattern: "^edma[0-2]-chan([0-9]|[1-2][0-9]|3[0-1])+$"
+      - pattern: "^edma[0-2]-chan([0-9]|[1-2][0-9]|3[0-1])+$"
+      - pattern: "^edma[0-2]-chan([0-9]|[1-2][0-9]|3[0-1])+$"
+      - pattern: "^edma[0-2]-chan([0-9]|[1-2][0-9]|3[0-1])+$"
+      - pattern: "^edma[0-2]-chan([0-9]|[1-2][0-9]|3[0-1])+$"
+      - pattern: "^edma[0-2]-chan([0-9]|[1-2][0-9]|3[0-1])+$"
+      - pattern: "^edma[0-2]-chan([0-9]|[1-2][0-9]|3[0-1])+$"
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-names
+  - '#dma-cells'
+  - dma-channels
+  - power-domains
+  - power-domain-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/firmware/imx/rsrc.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    edma2: dma-controller@5a1f0000 {
+        compatible = "fsl,imx8qm-edma";
+        reg = <0x5a280000 0x10000>, /* channel8 UART0 rx */
+              <0x5a290000 0x10000>, /* channel9 UART0 tx */
+              <0x5a2a0000 0x10000>, /* channel10 UART1 rx */
+              <0x5a2b0000 0x10000>, /* channel11 UART1 tx */
+              <0x5a2c0000 0x10000>, /* channel12 UART2 rx */
+              <0x5a2d0000 0x10000>, /* channel13 UART2 tx */
+              <0x5a2e0000 0x10000>, /* channel14 UART3 rx */
+              <0x5a2f0000 0x10000>; /* channel15 UART3 tx */
+        #dma-cells = <3>;
+        dma-channels = <8>;
+        interrupts = <GIC_SPI 434 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 435 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 436 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 437 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 438 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 439 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 440 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 441 IRQ_TYPE_LEVEL_HIGH>;
+       interrupt-names = "edma2-chan8-rx", "edma2-chan9-tx",
+                         "edma2-chan10-rx", "edma2-chan11-tx",
+                         "edma2-chan12-rx", "edma2-chan13-tx",
+                         "edma2-chan14-rx", "edma2-chan15-tx";
+       power-domains = <&pd IMX_SC_R_DMA_2_CH8>,
+                       <&pd IMX_SC_R_DMA_2_CH9>,
+                       <&pd IMX_SC_R_DMA_2_CH10>,
+                       <&pd IMX_SC_R_DMA_2_CH11>,
+                       <&pd IMX_SC_R_DMA_2_CH12>,
+                       <&pd IMX_SC_R_DMA_2_CH13>,
+                       <&pd IMX_SC_R_DMA_2_CH14>,
+                       <&pd IMX_SC_R_DMA_2_CH15>;
+       power-domain-names = "edma2-chan8", "edma2-chan9",
+                            "edma2-chan10", "edma2-chan11",
+                            "edma2-chan12", "edma2-chan13",
+                            "edma2-chan14", "edma2-chan15";
+    };
-- 
2.7.4


  parent reply	other threads:[~2020-07-14  9:28 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-07-14 17:41 [PATCH v2 0/9] add fsl-edma3 support Robin Gong
2020-07-14 17:41 ` [PATCH v2 1/9] dmaengine: fsl-edma: move edma_request functions into drvdata Robin Gong
2020-07-14 17:41 ` [PATCH v2 2/9] dmaengine: fsl-edma-common: add condition check for fsl_edma_chan_mux Robin Gong
2020-07-14 17:41 ` [PATCH v2 3/9] dmaengine: fsl-edma-common: add fsl_chan into fsl_edma_fill_tcd Robin Gong
2020-07-14 17:41 ` [PATCH v2 4/9] dmaengine: fsl-edma-common: export fsl_edma_set_tcd_regs Robin Gong
2020-07-14 17:41 ` [PATCH v2 5/9] dmaengine: fsl-edma3: add fsl-edma3 driver Robin Gong
2020-07-14 17:41 ` Robin Gong [this message]
2020-07-16 19:47   ` [PATCH v2 6/9] dt-bindings: dma: add fsl-edma3 yaml Rob Herring
2020-07-24 10:13     ` Robin Gong
2020-07-14 17:41 ` [PATCH v2 7/9] firmware: imx: scu-pd: correct dma resource Robin Gong
2020-07-14 17:41 ` [PATCH v2 8/9] arm64: dts: imx8qxp: add edma2 Robin Gong
2020-07-14 17:41 ` [PATCH v2 9/9] arm64: defconfig: add CONFIG_FSL_EDMA3 Robin Gong

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1594748508-22179-7-git-send-email-yibin.gong@nxp.com \
    --to=yibin.gong@nxp.com \
    --cc=angelo@sysam.it \
    --cc=catalin.marinas@arm.com \
    --cc=dan.j.williams@intel.com \
    --cc=devicetree@vger.kernel.org \
    --cc=dmaengine@vger.kernel.org \
    --cc=festevam@gmail.com \
    --cc=kernel@pengutronix.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-imx@nxp.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=robh+dt@kernel.org \
    --cc=s.hauer@pengutronix.de \
    --cc=shawnguo@kernel.org \
    --cc=vkoul@kernel.org \
    --cc=will@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).