messages from 2019-03-25 16:28:49 to 2019-04-24 16:23:48 UTC [more...]
dma: tegra: add accurate reporting of dma state
2019-04-24 16:23 UTC
dmaengine: rcar-dmac: Update copyright information
2019-04-24 12:22 UTC (8+ messages)
` [PATCH] "
dmaengine: stm32-dma: dmaengine: stm32-dma: use platform_get_irq()
2019-04-24 9:27 UTC (4+ messages)
` [PATCH] "
dmaengine: stm32-dma: fix residue calculation in stm32-dma
2019-04-24 9:26 UTC (5+ messages)
` [PATCH] "
[PATCH v1 00/15] add ecspi ERR009165 for i.mx6/7 soc family
2019-04-24 9:06 UTC (45+ messages)
` [v1,01/15] Revert "ARM: dts: imx6q: Use correct SDMA script for SPI5 core"
` [PATCH v1 01/15] "
` [EXT] "
` [v1,02/15] Revert "ARM: dts: imx6: Use correct SDMA script for SPI cores"
` [PATCH v1 02/15] "
` [v1,03/15] Revert "dmaengine: imx-sdma: refine to load context only once"
` [PATCH v1 03/15] "
` [v1,04/15] dmaengine: imx-sdma: remove dupilicated sdma_load_context
` [PATCH v1 04/15] "
` [v1,05/15] dma: engine: imx-sdma: add mcu_2_ecspi script
` [PATCH v1 05/15] "
` [v1,06/15] spi: imx: fix ERR009165
` [PATCH v1 06/15] "
` [v1,07/15] spi: imx: remove ERR009165 workaround on i.mx6ul
` [PATCH v1 07/15] "
` [v1,08/15] dt-bindings: spi: imx: add i.mx6ul to state errata fixed
` [PATCH v1 08/15] "
` [v1,09/15] dmaengine: imx-sdma: remove ERR009165 on i.mx6ul
` [PATCH v1 09/15] "
` [v1,10/15] dt-bindings: dma: imx-sdma: add i.mx6ul/6sx compatible name
` [PATCH v1 10/15] "
` [v1,11/15] dmaengine: imx-sdma: fix ecspi1 rx dma not work on i.mx8mm
` [PATCH v1 11/15] "
` [v1,12/15] ARM64: dts: freescale: imx8mm/8mq: update new compatible name for ecspi and sdma
` [PATCH v1 12/15] "
` [v1,13/15] ARM: dts: imx6ul: add dma support on ecspi
` [PATCH v1 13/15] "
` [v1,14/15] ARM: dts: imx6sll: correct ecspi/sdma compatible
` [PATCH v1 14/15] "
` [EXT] "
` [v1,15/15] arm64: defconfig: Enable SDMA on i.mx8mq/8mm
` [PATCH v1 15/15] "
[V2,RESEND] dmaengine: axi-dmac: Enable DMA_INTERLEAVE capability
2019-04-24 5:39 UTC (3+ messages)
` [PATCH][V2][RESEND] "
[V3] dmaengine: axi-dmac: Don't check the number of frames for alignment
2019-04-24 5:38 UTC (3+ messages)
` [PATCH V3] "
dmaengine: axi-dmac: Infer synthesis configuration parameters hardware
2019-04-24 5:36 UTC (3+ messages)
` [PATCH] "
[RFC v6 0/6] dmaengine: Add Synopsys eDMA IP driver (version 0)
2019-04-23 18:30 UTC (13+ messages)
` [RFC,v6,1/6] dmaengine: Add Synopsys eDMA IP core driver
` [RFC v6 1/6] "
` [RFC,v6,2/6] dmaengine: Add Synopsys eDMA IP version 0 support
` [RFC v6 2/6] "
` [RFC,v6,3/6] dmaengine: Add Synopsys eDMA IP version 0 debugfs support
` [RFC v6 3/6] "
` [RFC,v6,4/6] PCI: Add Synopsys endpoint EDDA Device ID
` [RFC v6 4/6] "
` [RFC,v6,5/6] dmaengine: Add Synopsys eDMA IP PCIe glue-logic
` [RFC v6 5/6] "
` [RFC,v6,6/6] MAINTAINERS: Add Synopsys eDMA IP driver maintainer
` [RFC v6 6/6] "
[next,03/25] dmaengine: Use dev_get_drvdata()
2019-04-23 7:49 UTC (2+ messages)
` [PATCH next 03/25] "
[v3,1/2] dmaengine: sh: rcar-dmac: With cyclic DMA residue 0 is valid
2019-04-23 5:15 UTC (12+ messages)
` [PATCH v3 1/2] "
` [v3,2/2] dmaengine: sh: rcar-dmac: Fix glitch in dmaengine_tx_status
` [PATCH v3 2/2] "
[RFC] dmaengine: bcm2835: Avoid GFP_KERNEL in device_prep_slave_sg
2019-04-23 5:11 UTC (3+ messages)
` [PATCH RFC] "
[v3,1/3] dmaengine: at_xdmac: remove BUG_ON macro in tasklet
2019-04-23 5:10 UTC (3+ messages)
` [PATCH v3 1/3] "
dmaengine: fsl-qdma: fixed the source/destination descriptior format
2019-04-19 8:46 UTC (2+ messages)
` [PATCH] "
[v2,2/3] dmaengine: imx-sdma: Only check ratio on parts that support 1:1
2019-04-18 8:54 UTC (3+ messages)
` [PATCH v2 2/3] "
Issues with i.MX SPI DMA transfers
2019-04-18 8:05 UTC (9+ messages)
[2/2] dmaengine: milbeaut: Add Milbeaut AXI DMA controller
2019-04-16 2:06 UTC (3+ messages)
` [PATCH 2/2] "
[4/6] dma: tegra: add accurate reporting of dma state
2019-04-15 16:56 UTC (12+ messages)
` [PATCH 4/6] "
dmaengine: xgene-dma: fix spelling mistake "descripto" -> "descriptor"
2019-04-15 15:30 UTC (2+ messages)
` [PATCH] "
[PATCH 0/7] Fix some bugs and add new feature for Spreadtrum DMA engine
2019-04-15 12:15 UTC (15+ messages)
` [1/7] dmaengine: sprd: Fix the possible crash when getting engine status
` [PATCH 1/7] "
` [2/7] dmaengine: sprd: Add validation of current descriptor in irq handler
` [PATCH 2/7] "
` [3/7] dmaengine: sprd: Fix the incorrect start for 2-stage destination channels
` [PATCH 3/7] "
` [4/7] dmaengine: sprd: Add device validation to support multiple controllers
` [PATCH 4/7] "
` [5/7] dmaengine: sprd: Fix block length overflow
` [PATCH 5/7] "
` [6/7] dmaengine: sprd: Fix the right place to configure 2-stage transfer
` [PATCH 6/7] "
` [7/7] dmaengine: sprd: Add interrupt support for "
` [PATCH 7/7] "
[v11,1/4] dmaengine: 8250_mtk_dma: add MediaTek uart DMA support
2019-04-11 8:20 UTC (7+ messages)
` [PATCH v11 1/4] "
[v1] dmaengine: idma64: Move driver name to the header
2019-04-09 18:01 UTC (6+ messages)
` [PATCH v1] "
[v2] mfd: intel-lpss: Set the device in reset state when init
2019-04-09 15:36 UTC (4+ messages)
` [PATCH v2] "
[V3,1/2] dmaengine: fsl-dpaa2-qdma: Add the DPDMAI(Data Path DMA Interface) support
2019-04-09 7:22 UTC (4+ messages)
` [V3 1/2] "
` [V3,2/2] dmaengine: fsl-dpaa2-qdma: Add NXP dpaa2 qDMA controller driver for Layerscape SoCs
` [V3 2/2] "
intel-lpss: Set the device in reset state when init
2019-04-08 8:05 UTC (6+ messages)
` [PATCH] "
dmaengine: bcm2835: Drop duplicate capability setting
2019-04-05 7:07 UTC
dmaengine: bcm2835: Drop duplicate capability setting
2019-04-04 17:25 UTC
Issues with i.MX SPI DMA transfers
2019-04-03 17:13 UTC
dmaengine: pl330: _stop: clear interrupt status
2019-04-03 11:06 UTC
[v2,3/3] arm64: dts: imx8mq: Change ahb clock for imx8mq
2019-04-03 11:00 UTC
[v2,1/3] arm64: dts: imx8mq: Fix the fsl,imx8mq-sdma compatible string
2019-04-03 10:59 UTC
[v3,3/3] dmaengine: at_xdmac: only monitor overflow errors for peripheral xfer
2019-04-03 10:23 UTC
[v3,2/3] dmaengine: at_xdmac: enhance channel errors handling in tasklet
2019-04-03 10:23 UTC
[v2,1/3] dmaengine: at_xdmac: remove BUG_ON macro in tasklet
2019-04-03 10:22 UTC
[v2,3/3] dmaengine: at_xdmac: only monitor overflow errors for peripheral xfer
2019-04-03 10:09 UTC
[v2,2/3] dmaengine: at_xdmac: enhance channel errors handling in tasklet
2019-04-03 10:09 UTC
[v2,1/3] dmaengine: at_xdmac: remove BUG_ON macro in tasklet
2019-04-03 10:09 UTC
[2/3] dmaengine: at_xdmac: enhance channel errors handling in tasklet
2019-04-03 10:05 UTC
[2/2] dmaengine: sh: rcar-dmac: Fix glitch in dmaengine_tx_status
2019-04-01 12:47 UTC
[v2,1/3] arm64: dts: imx8mq: Fix the fsl,imx8mq-sdma compatible string
2019-03-30 16:55 UTC
[v2,3/3] arm64: dts: imx8mq: Change ahb clock for imx8mq
2019-03-29 15:21 UTC
[v2,1/3] arm64: dts: imx8mq: Fix the fsl,imx8mq-sdma compatible string
2019-03-29 15:21 UTC
[1/4] arm64: dts: imx8mq: Fix the fsl,imx8mq-sdma compatible string
2019-03-29 14:09 UTC
dma: ti: fix a missing check in omap_dma_prep_dma_cyclic
2019-03-29 13:21 UTC
[1/4] arm64: dts: imx8mq: Fix the fsl,imx8mq-sdma compatible string
2019-03-29 11:20 UTC
[1/4] arm64: dts: imx8mq: Fix the fsl,imx8mq-sdma compatible string
2019-03-29 9:10 UTC
[2/4] dmaengine: imx-sdma: Add clock ratio 1:1 check
2019-03-28 22:52 UTC
[3/4] dt-bindings: Document the new imx8mq-sdma compatible string
2019-03-28 15:18 UTC
[1/4] arm64: dts: imx8mq: Fix the fsl,imx8mq-sdma compatible string
2019-03-28 14:56 UTC
[4/4] arm64: dts: imx8mq: Change ahb clock for imx8mq
2019-03-28 13:38 UTC
[3/4] dt-bindings: Document the new imx8mq-sdma compatible string
2019-03-28 13:38 UTC
[2/4] dmaengine: imx-sdma: Add clock ratio 1:1 check
2019-03-28 13:38 UTC
[1/4] arm64: dts: imx8mq: Fix the fsl,imx8mq-sdma compatible string
2019-03-28 13:38 UTC
[1/6] dt-bindings: arm64: allwinner: h6: Add binding for DMA controller
2019-03-27 23:47 UTC
[v2] dmaengine: stm32-mdma: Revert "Add a check on read_u32_array"
2019-03-26 8:55 UTC
[v2,1/1] dmaengine: imx-sdma: revert: add clock ratio 1:1 check
2019-03-26 2:10 UTC
[v2] dmaengine: stm32-mdma: Revert "Add a check on read_u32_array"
2019-03-25 16:28 UTC
page: next (older) | prev (newer) | latest
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).