dmaengine.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Frank Li <Frank.li@nxp.com>
To: Joy Zou <joy.zou@nxp.com>
Cc: peng.fan@nxp.com, vkoul@kernel.org, robh@kernel.org,
	krzk+dt@kernel.org, conor+dt@kernel.org, imx@lists.linux.dev,
	dmaengine@vger.kernel.org, linux-kernel@vger.kernel.org,
	devicetree@vger.kernel.org
Subject: Re: [PATCH v5 1/2] dmaengine: fsl-edma: clean up unused "fsl,imx8qm-adma" compatible string
Date: Wed, 24 Apr 2024 09:09:43 -0400	[thread overview]
Message-ID: <ZikEl8Banvu9AyW6@lizhi-Precision-Tower-5810> (raw)
In-Reply-To: <20240424064508.1886764-2-joy.zou@nxp.com>

On Wed, Apr 24, 2024 at 02:45:07PM +0800, Joy Zou wrote:
> The eDMA hardware issue only exist imx8QM A0. A0 never mass production.
> So remove the workaround safely.
> 
> Signed-off-by: Joy Zou <joy.zou@nxp.com>

Reviewed-by: Frank Li <Frank.Li@nxp.com>

> ---
> Changes for v5:
> 1.remove FSL_EDMA_DRV_QUIRK_SWAPPED in fsl-edma-common.h
> 
> Changes for v4:
> 1.change the subject to keep consistent with the patchset.
> 
> Changes for v2:
> 1. Change the subject.
> ---
>  drivers/dma/fsl-edma-common.c | 16 ++++------------
>  drivers/dma/fsl-edma-common.h |  2 --
>  drivers/dma/fsl-edma-main.c   |  8 --------
>  3 files changed, 4 insertions(+), 22 deletions(-)
> 
> diff --git a/drivers/dma/fsl-edma-common.c b/drivers/dma/fsl-edma-common.c
> index f9144b015439..ed93e01282d5 100644
> --- a/drivers/dma/fsl-edma-common.c
> +++ b/drivers/dma/fsl-edma-common.c
> @@ -75,18 +75,10 @@ static void fsl_edma3_enable_request(struct fsl_edma_chan *fsl_chan)
>  
>  	flags = fsl_edma_drvflags(fsl_chan);
>  	val = edma_readl_chreg(fsl_chan, ch_sbr);
> -	/* Remote/local swapped wrongly on iMX8 QM Audio edma */
> -	if (flags & FSL_EDMA_DRV_QUIRK_SWAPPED) {
> -		if (!fsl_chan->is_rxchan)
> -			val |= EDMA_V3_CH_SBR_RD;
> -		else
> -			val |= EDMA_V3_CH_SBR_WR;
> -	} else {
> -		if (fsl_chan->is_rxchan)
> -			val |= EDMA_V3_CH_SBR_RD;
> -		else
> -			val |= EDMA_V3_CH_SBR_WR;
> -	}
> +	if (fsl_chan->is_rxchan)
> +		val |= EDMA_V3_CH_SBR_RD;
> +	else
> +		val |= EDMA_V3_CH_SBR_WR;
>  
>  	if (fsl_chan->is_remote)
>  		val &= ~(EDMA_V3_CH_SBR_RD | EDMA_V3_CH_SBR_WR);
> diff --git a/drivers/dma/fsl-edma-common.h b/drivers/dma/fsl-edma-common.h
> index 01157912bfd5..3f93ebb890b3 100644
> --- a/drivers/dma/fsl-edma-common.h
> +++ b/drivers/dma/fsl-edma-common.h
> @@ -194,8 +194,6 @@ struct fsl_edma_desc {
>  #define FSL_EDMA_DRV_HAS_PD		BIT(5)
>  #define FSL_EDMA_DRV_HAS_CHCLK		BIT(6)
>  #define FSL_EDMA_DRV_HAS_CHMUX		BIT(7)
> -/* imx8 QM audio edma remote local swapped */
> -#define FSL_EDMA_DRV_QUIRK_SWAPPED	BIT(8)
>  /* control and status register is in tcd address space, edma3 reg layout */
>  #define FSL_EDMA_DRV_SPLIT_REG		BIT(9)
>  #define FSL_EDMA_DRV_BUS_8BYTE		BIT(10)
> diff --git a/drivers/dma/fsl-edma-main.c b/drivers/dma/fsl-edma-main.c
> index 755a3dc3b0a7..b06fa147d6ba 100644
> --- a/drivers/dma/fsl-edma-main.c
> +++ b/drivers/dma/fsl-edma-main.c
> @@ -349,13 +349,6 @@ static struct fsl_edma_drvdata imx8qm_data = {
>  	.setup_irq = fsl_edma3_irq_init,
>  };
>  
> -static struct fsl_edma_drvdata imx8qm_audio_data = {
> -	.flags = FSL_EDMA_DRV_QUIRK_SWAPPED | FSL_EDMA_DRV_HAS_PD | FSL_EDMA_DRV_EDMA3,
> -	.chreg_space_sz = 0x10000,
> -	.chreg_off = 0x10000,
> -	.setup_irq = fsl_edma3_irq_init,
> -};
> -
>  static struct fsl_edma_drvdata imx8ulp_data = {
>  	.flags = FSL_EDMA_DRV_HAS_CHMUX | FSL_EDMA_DRV_HAS_CHCLK | FSL_EDMA_DRV_HAS_DMACLK |
>  		 FSL_EDMA_DRV_EDMA3,
> @@ -397,7 +390,6 @@ static const struct of_device_id fsl_edma_dt_ids[] = {
>  	{ .compatible = "fsl,ls1028a-edma", .data = &ls1028a_data},
>  	{ .compatible = "fsl,imx7ulp-edma", .data = &imx7ulp_data},
>  	{ .compatible = "fsl,imx8qm-edma", .data = &imx8qm_data},
> -	{ .compatible = "fsl,imx8qm-adma", .data = &imx8qm_audio_data},
>  	{ .compatible = "fsl,imx8ulp-edma", .data = &imx8ulp_data},
>  	{ .compatible = "fsl,imx93-edma3", .data = &imx93_data3},
>  	{ .compatible = "fsl,imx93-edma4", .data = &imx93_data4},
> -- 
> 2.37.1
> 

  reply	other threads:[~2024-04-24 13:09 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-04-24  6:45 [PATCH v5 0/2] clean up unused "fsl,imx8qm-adma" compatible string Joy Zou
2024-04-24  6:45 ` [PATCH v5 1/2] dmaengine: fsl-edma: " Joy Zou
2024-04-24 13:09   ` Frank Li [this message]
2024-04-24  6:45 ` [PATCH v5 2/2] dt-bindings: fsl-dma: " Joy Zou
2024-04-25  9:17 ` [PATCH v5 0/2] " Vinod Koul

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=ZikEl8Banvu9AyW6@lizhi-Precision-Tower-5810 \
    --to=frank.li@nxp.com \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=dmaengine@vger.kernel.org \
    --cc=imx@lists.linux.dev \
    --cc=joy.zou@nxp.com \
    --cc=krzk+dt@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=peng.fan@nxp.com \
    --cc=robh@kernel.org \
    --cc=vkoul@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).