From: Geert Uytterhoeven <geert+renesas@glider.be>
To: Rob Herring <robh+dt@kernel.org>, Vinod Koul <vkoul@kernel.org>,
Magnus Damm <magnus.damm@gmail.com>
Cc: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>,
Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>,
devicetree@vger.kernel.org, dmaengine@vger.kernel.org,
linux-renesas-soc@vger.kernel.org, linux-sh@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
Geert Uytterhoeven <geert+renesas@glider.be>
Subject: [PATCH 1/3] dt-bindings: dmaengine: Remove SHDMA Device Tree bindings
Date: Fri, 11 Jun 2021 12:18:39 +0200 [thread overview]
Message-ID: <ba56b7199fcf3516f202389d2c8f836c9ec51e7a.1623406640.git.geert+renesas@glider.be> (raw)
In-Reply-To: <cover.1623406640.git.geert+renesas@glider.be>
Remove the Renesas SHDMA Device Tree bindings, as they are unused.
The DMA multiplexer node and one DMA controller instance were added to
the R-Mobile APE6 .dtsi file, but DMA support was never fully enabled,
cfr. commit a19788612f51b787 ("dmaengine: sh: Remove R-Mobile APE6
support").
Note that the mux idea was dropped when implementing support for DMA on
R-Car Gen2, cfr. renesas,rcar-dmac.yaml.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
.../devicetree/bindings/dma/renesas,shdma.txt | 84 -------------------
1 file changed, 84 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/dma/renesas,shdma.txt
diff --git a/Documentation/devicetree/bindings/dma/renesas,shdma.txt b/Documentation/devicetree/bindings/dma/renesas,shdma.txt
deleted file mode 100644
index a91920a49433c2b8..0000000000000000
--- a/Documentation/devicetree/bindings/dma/renesas,shdma.txt
+++ /dev/null
@@ -1,84 +0,0 @@
-* SHDMA Device Tree bindings
-
-Sh-/r-mobile and R-Car systems often have multiple identical DMA controller
-instances, capable of serving any of a common set of DMA slave devices, using
-the same configuration. To describe this topology we require all compatible
-SHDMA DT nodes to be placed under a DMA multiplexer node. All such compatible
-DMAC instances have the same number of channels and use the same DMA
-descriptors. Therefore respective DMA DT bindings can also all be placed in the
-multiplexer node. Even if there is only one such DMAC instance on a system, it
-still has to be placed under such a multiplexer node.
-
-* DMA multiplexer
-
-Required properties:
-- compatible: should be "renesas,shdma-mux"
-- #dma-cells: should be <1>, see "dmas" property below
-
-Optional properties (currently unused):
-- dma-channels: number of DMA channels
-- dma-requests: number of DMA request signals
-
-* DMA controller
-
-Required properties:
-- compatible: should be of the form "renesas,shdma-<soc>", where <soc> should
- be replaced with the desired SoC model, e.g.
- "renesas,shdma-r8a73a4" for the system DMAC on r8a73a4 SoC
-
-Example:
- dmac: dma-multiplexer@0 {
- compatible = "renesas,shdma-mux";
- #dma-cells = <1>;
- dma-channels = <20>;
- dma-requests = <256>;
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
-
- dma0: dma-controller@e6700020 {
- compatible = "renesas,shdma-r8a73a4";
- reg = <0 0xe6700020 0 0x89e0>;
- interrupt-parent = <&gic>;
- interrupts = <0 220 4
- 0 200 4
- 0 201 4
- 0 202 4
- 0 203 4
- 0 204 4
- 0 205 4
- 0 206 4
- 0 207 4
- 0 208 4
- 0 209 4
- 0 210 4
- 0 211 4
- 0 212 4
- 0 213 4
- 0 214 4
- 0 215 4
- 0 216 4
- 0 217 4
- 0 218 4
- 0 219 4>;
- interrupt-names = "error",
- "ch0", "ch1", "ch2", "ch3",
- "ch4", "ch5", "ch6", "ch7",
- "ch8", "ch9", "ch10", "ch11",
- "ch12", "ch13", "ch14", "ch15",
- "ch16", "ch17", "ch18", "ch19";
- };
- };
-
-* DMA client
-
-Required properties:
-- dmas: a list of <[DMA multiplexer phandle] [MID/RID value]> pairs,
- where MID/RID values are fixed handles, specified in the SoC
- manual
-- dma-names: a list of DMA channel names, one per "dmas" entry
-
-Example:
- dmas = <&dmac 0xd1
- &dmac 0xd2>;
- dma-names = "tx", "rx";
--
2.25.1
next parent reply other threads:[~2021-06-11 10:18 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <cover.1623406640.git.geert+renesas@glider.be>
2021-06-11 10:18 ` Geert Uytterhoeven [this message]
2021-06-16 17:56 ` [PATCH 1/3] dt-bindings: dmaengine: Remove SHDMA Device Tree bindings Rob Herring
2021-06-11 10:18 ` [PATCH 2/3] dmaengine: sh: Remove unused shdma-of driver Geert Uytterhoeven
2021-06-11 10:18 ` [PATCH 3/3] ARM: dts: r8a73a4: Remove non-functional DMA support Geert Uytterhoeven
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=ba56b7199fcf3516f202389d2c8f836c9ec51e7a.1623406640.git.geert+renesas@glider.be \
--to=geert+renesas@glider.be \
--cc=devicetree@vger.kernel.org \
--cc=dmaengine@vger.kernel.org \
--cc=guennadi.liakhovetski@linux.intel.com \
--cc=laurent.pinchart+renesas@ideasonboard.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=linux-sh@vger.kernel.org \
--cc=magnus.damm@gmail.com \
--cc=robh+dt@kernel.org \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).