dev.dpdk.org archive mirror
 help / color / mirror / Atom feed
From: Xiaoyun wang <cloud.wangxiaoyun@huawei.com>
To: <ferruh.yigit@intel.com>
Cc: <dev@dpdk.org>, <xuanziyang2@huawei.com>,
	<shahar.belkar@huawei.com>, <luoxianjun@huawei.com>,
	<tanya.brokhman@huawei.com>, <zhouguoyang@huawei.com>,
	Xiaoyun wang <cloud.wangxiaoyun@huawei.com>
Subject: [dpdk-dev] [PATCH v4 03/19] net/hinic: add VF PMD operation interfaces
Date: Thu, 10 Oct 2019 22:51:47 +0800	[thread overview]
Message-ID: <e26461fc0e10661ca5bb70bc85a89c5f2d88ddcb.1570718029.git.cloud.wangxiaoyun@huawei.com> (raw)
In-Reply-To: <cover.1570718029.git.cloud.wangxiaoyun@huawei.com>

This patch adds VF PMD operation interfaces to support SR-IOV.

Signed-off-by: Xiaoyun wang <cloud.wangxiaoyun@huawei.com>
---
 drivers/net/hinic/base/hinic_pmd_niccfg.c |  35 ++++
 drivers/net/hinic/base/hinic_pmd_niccfg.h |  14 ++
 drivers/net/hinic/hinic_pmd_ethdev.c      | 255 ++++++++++++++++++++----------
 3 files changed, 223 insertions(+), 81 deletions(-)

diff --git a/drivers/net/hinic/base/hinic_pmd_niccfg.c b/drivers/net/hinic/base/hinic_pmd_niccfg.c
index d3bbc3d..0a20ade 100644
--- a/drivers/net/hinic/base/hinic_pmd_niccfg.c
+++ b/drivers/net/hinic/base/hinic_pmd_niccfg.c
@@ -1436,3 +1436,38 @@ int hinic_flush_qp_res(void *hwdev)
 
 	return 0;
 }
+
+/**
+ * hinic_vf_get_default_cos - Get default cos of VF.
+ *
+ * @param hwdev
+ *   The hardware interface of a nic device.
+ * @param cos_id
+ *   Cos value.
+ *
+ * @return
+ *   0 on success.
+ *   negative error value otherwise.
+ */
+int hinic_vf_get_default_cos(struct hinic_hwdev *hwdev, u8 *cos_id)
+{
+	struct hinic_vf_default_cos vf_cos;
+	u16 out_size = sizeof(vf_cos);
+	int err;
+
+	memset(&vf_cos, 0, sizeof(vf_cos));
+	vf_cos.mgmt_msg_head.resp_aeq_num = HINIC_AEQ1;
+
+	err = hinic_msg_to_mgmt_sync(hwdev, HINIC_MOD_L2NIC,
+				     HINIC_PORT_CMD_GET_VF_COS, &vf_cos,
+				     sizeof(vf_cos), &vf_cos,
+				     &out_size, 0);
+	if (err || !out_size || vf_cos.mgmt_msg_head.status) {
+		PMD_DRV_LOG(ERR, "Get VF default cos failed, err: %d, status: 0x%x, out size: 0x%x",
+			err, vf_cos.mgmt_msg_head.status, out_size);
+		return -EFAULT;
+	}
+	*cos_id = vf_cos.state.default_cos;
+
+	return 0;
+}
diff --git a/drivers/net/hinic/base/hinic_pmd_niccfg.h b/drivers/net/hinic/base/hinic_pmd_niccfg.h
index dcb9602..94371bb 100644
--- a/drivers/net/hinic/base/hinic_pmd_niccfg.h
+++ b/drivers/net/hinic/base/hinic_pmd_niccfg.h
@@ -562,6 +562,18 @@ struct hinic_clear_qp_resource {
 	u16	rsvd1;
 };
 
+struct hinic_dcb_state {
+	u8 dcb_on;
+	u8 default_cos;
+	u8 up_cos[8];
+};
+
+struct hinic_vf_default_cos {
+	struct hinic_mgmt_msg_head mgmt_msg_head;
+
+	struct hinic_dcb_state state;
+};
+
 /* set physical port Anti-Attack rate */
 struct hinic_port_anti_attack_rate {
 	struct hinic_mgmt_msg_head mgmt_msg_head;
@@ -659,4 +671,6 @@ int hinic_set_link_status_follow(void *hwdev,
 
 void hinic_vf_func_free(struct hinic_hwdev *hwdev);
 
+int hinic_vf_get_default_cos(struct hinic_hwdev *hwdev, u8 *cos_id);
+
 #endif /* _HINIC_PMD_NICCFG_H_ */
diff --git a/drivers/net/hinic/hinic_pmd_ethdev.c b/drivers/net/hinic/hinic_pmd_ethdev.c
index c9a400e..2f413e3 100644
--- a/drivers/net/hinic/hinic_pmd_ethdev.c
+++ b/drivers/net/hinic/hinic_pmd_ethdev.c
@@ -20,6 +20,7 @@
 #include "base/hinic_pmd_cmdq.h"
 #include "base/hinic_pmd_niccfg.h"
 #include "base/hinic_pmd_nicio.h"
+#include "base/hinic_pmd_mbox.h"
 #include "hinic_pmd_ethdev.h"
 #include "hinic_pmd_tx.h"
 #include "hinic_pmd_rx.h"
@@ -29,13 +30,21 @@
 
 /* Hinic devices */
 #define HINIC_DEV_ID_PRD		0x1822
+#define HINIC_DEV_ID_VF			0x375E
+#define HINIC_DEV_ID_VF_HV		0x379E
+
+/* Mezz card for Blade Server */
 #define HINIC_DEV_ID_MEZZ_25GE		0x0210
 #define HINIC_DEV_ID_MEZZ_40GE		0x020D
 #define HINIC_DEV_ID_MEZZ_100GE		0x0205
 
+/* 2*25G and 2*100G card */
+#define HINIC_DEV_ID_1822_DUAL_25GE	0x0206
+#define HINIC_DEV_ID_1822_100GE		0x0200
+
 #define HINIC_SERVICE_MODE_NIC		2
 
-#define HINIC_INTR_CB_UNREG_MAX_RETRIES		10
+#define HINIC_INTR_CB_UNREG_MAX_RETRIES	10
 
 #define DEFAULT_BASE_COS		4
 #define NR_MAX_COS			8
@@ -43,7 +52,7 @@
 #define HINIC_MIN_RX_BUF_SIZE		1024
 #define HINIC_MAX_MAC_ADDRS		1
 
-/** Driver-specific log messages type. */
+/* Driver-specific log messages type */
 int hinic_logtype;
 
 struct hinic_xstats_name_off {
@@ -197,10 +206,16 @@ struct hinic_xstats_name_off {
 
 static int hinic_xstats_calc_num(struct hinic_nic_dev *nic_dev)
 {
-	return (HINIC_VPORT_XSTATS_NUM +
-		HINIC_PHYPORT_XSTATS_NUM +
-		HINIC_RXQ_XSTATS_NUM * nic_dev->num_rq +
-		HINIC_TXQ_XSTATS_NUM * nic_dev->num_sq);
+	if (HINIC_IS_VF(nic_dev->hwdev)) {
+		return (HINIC_VPORT_XSTATS_NUM +
+			HINIC_RXQ_XSTATS_NUM * nic_dev->num_rq +
+			HINIC_TXQ_XSTATS_NUM * nic_dev->num_sq);
+	} else {
+		return (HINIC_VPORT_XSTATS_NUM +
+			HINIC_PHYPORT_XSTATS_NUM +
+			HINIC_RXQ_XSTATS_NUM * nic_dev->num_rq +
+			HINIC_TXQ_XSTATS_NUM * nic_dev->num_sq);
+	}
 }
 
 static const struct rte_eth_desc_lim hinic_rx_desc_lim = {
@@ -599,7 +614,7 @@ static void hinic_reset_tx_queue(struct rte_eth_dev *dev)
 		txq->wq->delta = txq->q_depth;
 		txq->wq->mask  = txq->q_depth - 1;
 
-		/*clear hardware ci*/
+		/* clear hardware ci */
 		ci_addr = (volatile u32 *)HINIC_CI_VADDR(nic_io->ci_vaddr_base,
 							q_id);
 		*ci_addr = 0;
@@ -888,6 +903,9 @@ static int hinic_dev_start(struct rte_eth_dev *dev)
 		goto cfg_rxtx_fail;
 	}
 
+	/* reactive pf status, so that uP report asyn event */
+	hinic_set_pf_status(nic_dev->hwdev->hwif, HINIC_PF_STATUS_ACTIVE_FLAG);
+
 	/* open virtual port and ready to start packet receiving */
 	rc = hinic_set_vport_enable(nic_dev->hwdev, true);
 	if (rc) {
@@ -915,6 +933,8 @@ static int hinic_dev_start(struct rte_eth_dev *dev)
 	(void)hinic_set_vport_enable(nic_dev->hwdev, false);
 
 en_vport_fail:
+	hinic_set_pf_status(nic_dev->hwdev->hwif, HINIC_PF_STATUS_INIT);
+
 	/* Flush tx && rx chip resources in case of set vport fake fail */
 	(void)hinic_flush_qp_res(nic_dev->hwdev);
 	rte_delay_ms(100);
@@ -1233,7 +1253,7 @@ static int hinic_dev_stats_reset(struct rte_eth_dev *dev)
  *
  * @param dev
  *   Pointer to Ethernet device structure.
- **/
+ */
 static int hinic_dev_xstats_reset(struct rte_eth_dev *dev)
 {
 	struct hinic_nic_dev *nic_dev = HINIC_ETH_DEV_TO_PRIVATE_NIC_DEV(dev);
@@ -1697,6 +1717,9 @@ static int hinic_dev_xstats_get(struct rte_eth_dev *dev,
 		count++;
 	}
 
+	if (HINIC_IS_VF(nic_dev->hwdev))
+		return count;
+
 	/* Get stats from hinic_phy_port_stats */
 	err = hinic_get_phy_port_stats(nic_dev->hwdev, &port_stats);
 	if (err)
@@ -1765,6 +1788,9 @@ static int hinic_dev_xstats_get_names(struct rte_eth_dev *dev,
 		count++;
 	}
 
+	if (HINIC_IS_VF(nic_dev->hwdev))
+		return count;
+
 	/* get phy port stats */
 	for (i = 0; i < HINIC_PHYPORT_XSTATS_NUM; i++) {
 		snprintf(xstats_names[count].name,
@@ -1805,18 +1831,39 @@ static int hinic_set_default_dcb_feature(struct hinic_nic_dev *nic_dev)
 					up_pgid, up_bw, up_strict);
 }
 
-static void hinic_init_default_cos(struct hinic_nic_dev *nic_dev)
+static int hinic_init_default_cos(struct hinic_nic_dev *nic_dev)
 {
-	nic_dev->default_cos =
-			(hinic_global_func_id(nic_dev->hwdev) +
-			 DEFAULT_BASE_COS) % NR_MAX_COS;
+	u8 cos_id = 0;
+	int err;
+
+	if (!HINIC_IS_VF(nic_dev->hwdev)) {
+		nic_dev->default_cos =
+				(hinic_global_func_id(nic_dev->hwdev) +
+						DEFAULT_BASE_COS) % NR_MAX_COS;
+	} else {
+		err = hinic_vf_get_default_cos(nic_dev->hwdev, &cos_id);
+		if (err) {
+			PMD_DRV_LOG(ERR, "Get VF default cos failed, err: %d",
+					err);
+			return HINIC_ERROR;
+		}
+
+		nic_dev->default_cos = cos_id;
+	}
+
+	return 0;
 }
 
 static int hinic_set_default_hw_feature(struct hinic_nic_dev *nic_dev)
 {
 	int err;
 
-	hinic_init_default_cos(nic_dev);
+	err = hinic_init_default_cos(nic_dev);
+	if (err)
+		return err;
+
+	if (hinic_func_type(nic_dev->hwdev) == TYPE_VF)
+		return 0;
 
 	/* Restore DCB configure to default status */
 	err = hinic_set_default_dcb_feature(nic_dev);
@@ -1852,6 +1899,9 @@ static int32_t hinic_card_workmode_check(struct hinic_nic_dev *nic_dev)
 	struct hinic_board_info info = { 0 };
 	int rc;
 
+	if (hinic_func_type(nic_dev->hwdev) == TYPE_VF)
+		return 0;
+
 	rc = hinic_get_board_info(nic_dev->hwdev, &info);
 	if (rc)
 		return rc;
@@ -1867,7 +1917,7 @@ static int hinic_copy_mempool_init(struct hinic_nic_dev *nic_dev)
 		nic_dev->cpy_mpool =
 		rte_pktmbuf_pool_create(nic_dev->proc_dev_name,
 					HINIC_COPY_MEMPOOL_DEPTH,
-					RTE_CACHE_LINE_SIZE, 0,
+					0, 0,
 					HINIC_COPY_MBUF_SIZE,
 					rte_socket_id());
 		if (!nic_dev->cpy_mpool) {
@@ -1978,6 +2028,14 @@ static int hinic_nic_dev_create(struct rte_eth_dev *eth_dev)
 		goto init_pf_to_mgmt_fail;
 	}
 
+	/* init mailbox */
+	rc = hinic_comm_func_to_func_init(nic_dev->hwdev);
+	if (rc) {
+		PMD_DRV_LOG(ERR, "Initialize func_to_func failed, dev_name: %s",
+			    eth_dev->data->name);
+		goto init_func_to_func_fail;
+	}
+
 	rc = hinic_card_workmode_check(nic_dev);
 	if (rc) {
 		PMD_DRV_LOG(ERR, "Check card workmode failed, dev_name: %s",
@@ -2077,6 +2135,9 @@ static int hinic_nic_dev_create(struct rte_eth_dev *eth_dev)
 init_cmdq_fail:
 l2nic_reset_fail:
 workmode_check_fail:
+	hinic_comm_func_to_func_free(nic_dev->hwdev);
+
+init_func_to_func_fail:
 	hinic_comm_pf_to_mgmt_free(nic_dev->hwdev);
 
 init_pf_to_mgmt_fail:
@@ -2110,6 +2171,7 @@ static void hinic_nic_dev_destroy(struct rte_eth_dev *eth_dev)
 	hinic_deinit_nicio(nic_dev->hwdev);
 	hinic_deactivate_hwdev_state(nic_dev->hwdev);
 	hinic_comm_cmdqs_free(nic_dev->hwdev);
+	hinic_comm_func_to_func_free(nic_dev->hwdev);
 	hinic_comm_pf_to_mgmt_free(nic_dev->hwdev);
 	hinic_comm_aeqs_free(nic_dev->hwdev);
 	free_cfg_mgmt(nic_dev->hwdev);
@@ -2119,6 +2181,93 @@ static void hinic_nic_dev_destroy(struct rte_eth_dev *eth_dev)
 	nic_dev->hwdev = NULL;
 }
 
+/**
+ * DPDK callback to close the device.
+ *
+ * @param dev
+ *   Pointer to Ethernet device structure.
+ */
+static void hinic_dev_close(struct rte_eth_dev *dev)
+{
+	struct hinic_nic_dev *nic_dev = HINIC_ETH_DEV_TO_PRIVATE_NIC_DEV(dev);
+
+	if (hinic_test_and_set_bit(HINIC_DEV_CLOSE, &nic_dev->dev_status)) {
+		PMD_DRV_LOG(WARNING, "Device %s already closed",
+			    dev->data->name);
+		return;
+	}
+
+	/* stop device first */
+	hinic_dev_stop(dev);
+
+	/* rx_cqe, rx_info */
+	hinic_free_all_rx_resources(dev);
+
+	/* tx_info */
+	hinic_free_all_tx_resources(dev);
+
+	/* free wq, pi_dma_addr */
+	hinic_free_all_rq(nic_dev);
+
+	/* free wq, db_addr */
+	hinic_free_all_sq(nic_dev);
+
+	/* deinit mac vlan tbl */
+	hinic_deinit_mac_addr(dev);
+
+	/* disable hardware and uio interrupt */
+	hinic_disable_interrupt(dev);
+
+	/* deinit nic hardware device */
+	hinic_nic_dev_destroy(dev);
+}
+
+static const struct eth_dev_ops hinic_pmd_ops = {
+	.dev_configure                 = hinic_dev_configure,
+	.dev_infos_get                 = hinic_dev_infos_get,
+	.rx_queue_setup                = hinic_rx_queue_setup,
+	.tx_queue_setup                = hinic_tx_queue_setup,
+	.dev_start                     = hinic_dev_start,
+	.link_update                   = hinic_link_update,
+	.rx_queue_release              = hinic_rx_queue_release,
+	.tx_queue_release              = hinic_tx_queue_release,
+	.dev_stop                      = hinic_dev_stop,
+	.dev_close                     = hinic_dev_close,
+	.promiscuous_enable            = hinic_dev_promiscuous_enable,
+	.promiscuous_disable           = hinic_dev_promiscuous_disable,
+	.rss_hash_update               = hinic_rss_hash_update,
+	.rss_hash_conf_get             = hinic_rss_conf_get,
+	.reta_update                   = hinic_rss_indirtbl_update,
+	.reta_query                    = hinic_rss_indirtbl_query,
+	.stats_get                     = hinic_dev_stats_get,
+	.stats_reset                   = hinic_dev_stats_reset,
+	.xstats_get                    = hinic_dev_xstats_get,
+	.xstats_reset                  = hinic_dev_xstats_reset,
+	.xstats_get_names              = hinic_dev_xstats_get_names,
+};
+
+static const struct eth_dev_ops hinic_pmd_vf_ops = {
+	.dev_configure                 = hinic_dev_configure,
+	.dev_infos_get                 = hinic_dev_infos_get,
+	.rx_queue_setup                = hinic_rx_queue_setup,
+	.tx_queue_setup                = hinic_tx_queue_setup,
+	.dev_start                     = hinic_dev_start,
+	.link_update                   = hinic_link_update,
+	.rx_queue_release              = hinic_rx_queue_release,
+	.tx_queue_release              = hinic_tx_queue_release,
+	.dev_stop                      = hinic_dev_stop,
+	.dev_close                     = hinic_dev_close,
+	.rss_hash_update               = hinic_rss_hash_update,
+	.rss_hash_conf_get             = hinic_rss_conf_get,
+	.reta_update                   = hinic_rss_indirtbl_update,
+	.reta_query                    = hinic_rss_indirtbl_query,
+	.stats_get                     = hinic_dev_stats_get,
+	.stats_reset                   = hinic_dev_stats_reset,
+	.xstats_get                    = hinic_dev_xstats_get,
+	.xstats_reset                  = hinic_dev_xstats_reset,
+	.xstats_get_names              = hinic_dev_xstats_get_names,
+};
+
 static int hinic_func_init(struct rte_eth_dev *eth_dev)
 {
 	struct rte_pci_device *pci_dev;
@@ -2173,6 +2322,11 @@ static int hinic_func_init(struct rte_eth_dev *eth_dev)
 		goto create_nic_dev_fail;
 	}
 
+	if (HINIC_IS_VF(nic_dev->hwdev))
+		eth_dev->dev_ops = &hinic_pmd_vf_ops;
+	else
+		eth_dev->dev_ops = &hinic_pmd_ops;
+
 	rc = hinic_init_mac_addr(eth_dev);
 	if (rc) {
 		PMD_DRV_LOG(ERR, "Initialize mac table failed, dev_name: %s",
@@ -2214,6 +2368,7 @@ static int hinic_func_init(struct rte_eth_dev *eth_dev)
 	hinic_deinit_mac_addr(eth_dev);
 
 init_mac_fail:
+	eth_dev->dev_ops = NULL;
 	hinic_nic_dev_destroy(eth_dev);
 
 create_nic_dev_fail:
@@ -2226,71 +2381,6 @@ static int hinic_func_init(struct rte_eth_dev *eth_dev)
 	return rc;
 }
 
-/**
- * DPDK callback to close the device.
- *
- * @param dev
- *   Pointer to Ethernet device structure.
- */
-static void hinic_dev_close(struct rte_eth_dev *dev)
-{
-	struct hinic_nic_dev *nic_dev = HINIC_ETH_DEV_TO_PRIVATE_NIC_DEV(dev);
-
-	if (hinic_test_and_set_bit(HINIC_DEV_CLOSE, &nic_dev->dev_status)) {
-		PMD_DRV_LOG(WARNING, "Device %s already closed",
-			    dev->data->name);
-		return;
-	}
-
-	/* stop device first */
-	hinic_dev_stop(dev);
-
-	/* rx_cqe, rx_info */
-	hinic_free_all_rx_resources(dev);
-
-	/* tx_info */
-	hinic_free_all_tx_resources(dev);
-
-	/* free wq, pi_dma_addr */
-	hinic_free_all_rq(nic_dev);
-
-	/* free wq, db_addr */
-	hinic_free_all_sq(nic_dev);
-
-	/* deinit mac vlan tbl */
-	hinic_deinit_mac_addr(dev);
-
-	/* disable hardware and uio interrupt */
-	hinic_disable_interrupt(dev);
-
-	/* deinit nic hardware device */
-	hinic_nic_dev_destroy(dev);
-}
-
-static const struct eth_dev_ops hinic_pmd_ops = {
-	.dev_configure                 = hinic_dev_configure,
-	.dev_infos_get                 = hinic_dev_infos_get,
-	.rx_queue_setup                = hinic_rx_queue_setup,
-	.tx_queue_setup                = hinic_tx_queue_setup,
-	.dev_start                     = hinic_dev_start,
-	.link_update                   = hinic_link_update,
-	.rx_queue_release              = hinic_rx_queue_release,
-	.tx_queue_release              = hinic_tx_queue_release,
-	.dev_stop                      = hinic_dev_stop,
-	.dev_close                     = hinic_dev_close,
-	.promiscuous_enable            = hinic_dev_promiscuous_enable,
-	.promiscuous_disable           = hinic_dev_promiscuous_disable,
-	.rss_hash_update               = hinic_rss_hash_update,
-	.rss_hash_conf_get             = hinic_rss_conf_get,
-	.reta_update                   = hinic_rss_indirtbl_update,
-	.reta_query                    = hinic_rss_indirtbl_query,
-	.stats_get                     = hinic_dev_stats_get,
-	.stats_reset                   = hinic_dev_stats_reset,
-	.xstats_get                    = hinic_dev_xstats_get,
-	.xstats_reset                  = hinic_dev_xstats_reset,
-	.xstats_get_names              = hinic_dev_xstats_get_names,
-};
-
 static int hinic_dev_init(struct rte_eth_dev *eth_dev)
 {
 	struct rte_pci_device *pci_dev;
@@ -2303,8 +2393,7 @@ static int hinic_dev_init(struct rte_eth_dev *eth_dev)
 		    (rte_eal_process_type() == RTE_PROC_PRIMARY) ?
 		    "primary" : "secondary");
 
-	/* rte_eth_dev ops, rx_burst and tx_burst */
-	eth_dev->dev_ops = &hinic_pmd_ops;
+	/* rte_eth_dev rx_burst and tx_burst */
 	eth_dev->rx_pkt_burst = hinic_recv_pkts;
 	eth_dev->tx_pkt_burst = hinic_xmit_pkts;
 
@@ -2338,6 +2427,10 @@ static int hinic_dev_uninit(struct rte_eth_dev *dev)
 	{ RTE_PCI_DEVICE(HINIC_HUAWEI_VENDOR_ID, HINIC_DEV_ID_MEZZ_25GE) },
 	{ RTE_PCI_DEVICE(HINIC_HUAWEI_VENDOR_ID, HINIC_DEV_ID_MEZZ_40GE) },
 	{ RTE_PCI_DEVICE(HINIC_HUAWEI_VENDOR_ID, HINIC_DEV_ID_MEZZ_100GE) },
+	{ RTE_PCI_DEVICE(HINIC_HUAWEI_VENDOR_ID, HINIC_DEV_ID_VF) },
+	{ RTE_PCI_DEVICE(HINIC_HUAWEI_VENDOR_ID, HINIC_DEV_ID_VF_HV) },
+	{ RTE_PCI_DEVICE(HINIC_HUAWEI_VENDOR_ID, HINIC_DEV_ID_1822_DUAL_25GE) },
+	{ RTE_PCI_DEVICE(HINIC_HUAWEI_VENDOR_ID, HINIC_DEV_ID_1822_100GE) },
 	{.vendor_id = 0},
 };
 
-- 
1.8.3.1


  parent reply	other threads:[~2019-10-10 14:37 UTC|newest]

Thread overview: 27+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-10-10 14:51 [dpdk-dev] [PATCH v4 00/19] Add advanced features for Huawei hinic pmd Xiaoyun wang
2019-10-10 14:51 ` [dpdk-dev] [PATCH v4 01/19] net/hinic/base: add mbox command channel for SRIOV Xiaoyun wang
2019-10-11  9:37   ` Gavin Hu (Arm Technology China)
2019-10-29  6:57     ` Wangxiaoyun (Cloud, Network Chip Application Development Dept)
2019-10-10 14:51 ` [dpdk-dev] [PATCH v4 02/19] net/hinic/base: add HW interfaces for SR-IOV Xiaoyun wang
2019-10-10 14:51 ` Xiaoyun wang [this message]
2019-10-10 14:51 ` [dpdk-dev] [PATCH v4 04/19] net/hinic: add VLAN filter and offload Xiaoyun wang
2019-10-10 14:51 ` [dpdk-dev] [PATCH v4 05/19] net/hinic: add allmulticast mode and MTU set Xiaoyun wang
2019-10-10 14:51 ` [dpdk-dev] [PATCH v4 06/19] net/hinic: add unicast and multicast MAC set Xiaoyun wang
2019-10-10 14:51 ` [dpdk-dev] [PATCH v4 07/19] net/hinic/base: add fdir config interface Xiaoyun wang
2019-10-10 14:51 ` [dpdk-dev] [PATCH v4 08/19] net/hinic: add fdir validate flow operations Xiaoyun wang
2019-10-10 14:51 ` [dpdk-dev] [PATCH v4 09/19] net/hinic: create and destroy ntuple filter Xiaoyun wang
2019-10-10 14:51 ` [dpdk-dev] [PATCH v4 10/19] net/hinic: create and destroy fdir filter Xiaoyun wang
2019-10-10 14:51 ` [dpdk-dev] [PATCH v4 11/19] net/hinic: flush " Xiaoyun wang
2019-10-10 14:51 ` [dpdk-dev] [PATCH v4 12/19] net/hinic: set link down and up Xiaoyun wang
2019-10-10 14:51 ` [dpdk-dev] [PATCH v4 13/19] net/hinic: get firmware version Xiaoyun wang
2019-10-10 14:51 ` [dpdk-dev] [PATCH v4 14/19] net/hinic: support inner L3 checksum offload Xiaoyun wang
2019-10-10 14:51 ` [dpdk-dev] [PATCH v4 15/19] net/hinic: support LRO offload Xiaoyun wang
2019-10-10 14:52 ` [dpdk-dev] [PATCH v4 16/19] net/hinic: add hinic PMD doc files Xiaoyun wang
2019-10-11  9:25   ` Ferruh Yigit
2019-10-12 14:16     ` Wangxiaoyun (Cloud, Network Chip Application Development Dept)
2019-10-10 14:52 ` [dpdk-dev] [PATCH v4 17/19] net/hinic/base: optimize aeq interfaces Xiaoyun wang
2019-10-10 14:52 ` [dpdk-dev] [PATCH v4 18/19] net/hinic: optimize RX performance Xiaoyun wang
2019-10-10 14:52 ` [dpdk-dev] [PATCH v4 19/19] net/hinic: add support for getting rxq or txq info Xiaoyun wang
2019-10-11  9:26 ` [dpdk-dev] [PATCH v4 00/19] Add advanced features for Huawei hinic pmd Ferruh Yigit
2019-10-25  9:04 ` Thomas Monjalon
2019-10-25 12:15   ` Ferruh Yigit

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=e26461fc0e10661ca5bb70bc85a89c5f2d88ddcb.1570718029.git.cloud.wangxiaoyun@huawei.com \
    --to=cloud.wangxiaoyun@huawei.com \
    --cc=dev@dpdk.org \
    --cc=ferruh.yigit@intel.com \
    --cc=luoxianjun@huawei.com \
    --cc=shahar.belkar@huawei.com \
    --cc=tanya.brokhman@huawei.com \
    --cc=xuanziyang2@huawei.com \
    --cc=zhouguoyang@huawei.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).