dri-devel.lists.freedesktop.org archive mirror
 help / color / mirror / Atom feed
From: Boris Brezillon <boris.brezillon@collabora.com>
To: dri-devel@lists.freedesktop.org
Cc: Nikita Yushchenko <nikita.yoush@cogentembedded.com>,
	Mark Rutland <mark.rutland@arm.com>,
	Jernej Skrabec <jernej.skrabec@siol.net>,
	Neil Armstrong <narmstrong@baylibre.com>,
	Andrey Smirnov <andrew.smirnov@gmail.com>,
	Jonas Karlman <jonas@kwiboo.se>, Rob Herring <robh+dt@kernel.org>,
	Andrzej Hajda <a.hajda@samsung.com>,
	devicetree@vger.kernel.org,
	Thierry Reding <thierry.reding@gmail.com>,
	Laurent Pinchart <Laurent.pinchart@ideasonboard.com>,
	Boris Brezillon <boris.brezillon@collabora.com>,
	intel-gfx-trybot@lists.freedesktop.org, kernel@collabora.com,
	Sam Ravnborg <sam@ravnborg.org>, Chris Healy <cphealy@gmail.com>
Subject: [PATCH v10 08/12] drm/bridge: lvds-codec: Implement basic bus format negotiation
Date: Tue, 28 Jan 2020 14:55:10 +0100	[thread overview]
Message-ID: <20200128135514.108171-9-boris.brezillon@collabora.com> (raw)
In-Reply-To: <20200128135514.108171-1-boris.brezillon@collabora.com>

Some DPI -> LVDS encoders might support several input bus width. Add a
DT property to describe the bus width used on a specific design.

v10:
* Add changelog to the commit message

v8 -> v9:
* No changes

v7:
* Fix a use-after-release problem
* Get rid of the data-mapping parsing
* Use kmalloc instead of kcalloc.

v4 -> v6:
* Not part of the series

v3:
* Use bus-width for the rgb24/rgb18 distinction
* Adjust code to match core changes
* Get rid of of_get_data_mapping()
* Don't implement ->atomic_check() (the core now takes care of bus
  flags propagation)

v2:
* Make the bus-format negotiation logic more generic

Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
---
 drivers/gpu/drm/bridge/lvds-codec.c | 64 ++++++++++++++++++++++++++---
 1 file changed, 58 insertions(+), 6 deletions(-)

diff --git a/drivers/gpu/drm/bridge/lvds-codec.c b/drivers/gpu/drm/bridge/lvds-codec.c
index 5f04cc11227e..f4fd8472c335 100644
--- a/drivers/gpu/drm/bridge/lvds-codec.c
+++ b/drivers/gpu/drm/bridge/lvds-codec.c
@@ -11,6 +11,7 @@
 #include <linux/of_graph.h>
 #include <linux/platform_device.h>
 
+#include <drm/drm_atomic_helper.h>
 #include <drm/drm_bridge.h>
 #include <drm/drm_panel.h>
 
@@ -19,6 +20,7 @@ struct lvds_codec {
 	struct drm_bridge *panel_bridge;
 	struct gpio_desc *powerdown_gpio;
 	u32 connector_type;
+	u32 input_fmt;
 };
 
 static int lvds_codec_attach(struct drm_bridge *bridge)
@@ -48,18 +50,47 @@ static void lvds_codec_disable(struct drm_bridge *bridge)
 		gpiod_set_value_cansleep(lvds_codec->powerdown_gpio, 1);
 }
 
+static u32 *
+lvds_codec_atomic_get_input_bus_fmts(struct drm_bridge *bridge,
+				     struct drm_bridge_state *bridge_state,
+				     struct drm_crtc_state *crtc_state,
+				     struct drm_connector_state *conn_state,
+				     u32 output_fmt,
+				     unsigned int *num_input_fmts)
+{
+	struct lvds_codec *lvds_codec = container_of(bridge,
+						     struct lvds_codec, bridge);
+	u32 *input_fmts;
+
+	input_fmts = kmalloc(sizeof(*input_fmts), GFP_KERNEL);
+	if (!input_fmts) {
+		*num_input_fmts = 0;
+		return NULL;
+	}
+
+	*num_input_fmts = 1;
+	input_fmts[0] = lvds_codec->input_fmt;
+	return input_fmts;
+}
+
 static struct drm_bridge_funcs funcs = {
 	.attach = lvds_codec_attach,
 	.enable = lvds_codec_enable,
 	.disable = lvds_codec_disable,
+	.atomic_reset = drm_atomic_helper_bridge_reset,
+	.atomic_duplicate_state = drm_atomic_helper_bridge_duplicate_state,
+	.atomic_destroy_state = drm_atomic_helper_bridge_destroy_state,
+	.atomic_get_input_bus_fmts = lvds_codec_atomic_get_input_bus_fmts,
 };
 
 static int lvds_codec_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
-	struct device_node *panel_node;
+	struct device_node *np;
 	struct drm_panel *panel;
 	struct lvds_codec *lvds_codec;
+	u32 input_bus_width;
+	int err;
 
 	lvds_codec = devm_kzalloc(dev, sizeof(*lvds_codec), GFP_KERNEL);
 	if (!lvds_codec)
@@ -69,22 +100,43 @@ static int lvds_codec_probe(struct platform_device *pdev)
 	lvds_codec->powerdown_gpio = devm_gpiod_get_optional(dev, "powerdown",
 							     GPIOD_OUT_HIGH);
 	if (IS_ERR(lvds_codec->powerdown_gpio)) {
-		int err = PTR_ERR(lvds_codec->powerdown_gpio);
+		err = PTR_ERR(lvds_codec->powerdown_gpio);
 
 		if (err != -EPROBE_DEFER)
 			dev_err(dev, "powerdown GPIO failure: %d\n", err);
 		return err;
 	}
 
+	np = of_graph_get_port_by_id(dev->of_node, 0);
+	if (!np) {
+		dev_dbg(dev, "port 0 not found\n");
+		return -ENXIO;
+	}
+
+	err = of_property_read_u32(np, "bus-width", &input_bus_width);
+	of_node_put(np);
+
+	if (err) {
+		lvds_codec->input_fmt = MEDIA_BUS_FMT_FIXED;
+	} else if (input_bus_width == 18) {
+		lvds_codec->input_fmt = MEDIA_BUS_FMT_RGB666_1X18;
+	} else if (input_bus_width == 24) {
+		lvds_codec->input_fmt = MEDIA_BUS_FMT_RGB888_1X24;
+	} else {
+		dev_dbg(dev, "unsupported bus-width value %u on port 0\n",
+			input_bus_width);
+		return -ENOTSUPP;
+	}
+
 	/* Locate the panel DT node. */
-	panel_node = of_graph_get_remote_node(dev->of_node, 1, 0);
-	if (!panel_node) {
+	np = of_graph_get_remote_node(dev->of_node, 1, 0);
+	if (!np) {
 		dev_dbg(dev, "panel DT node not found\n");
 		return -ENXIO;
 	}
 
-	panel = of_drm_find_panel(panel_node);
-	of_node_put(panel_node);
+	panel = of_drm_find_panel(np);
+	of_node_put(np);
 	if (IS_ERR(panel)) {
 		dev_dbg(dev, "panel not found, deferring probe\n");
 		return PTR_ERR(panel);
-- 
2.24.1

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

  parent reply	other threads:[~2020-01-28 13:55 UTC|newest]

Thread overview: 27+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-01-28 13:55 [PATCH v10 00/12] drm: Add support for bus-format negotiation Boris Brezillon
2020-01-28 13:55 ` [PATCH v10 01/12] drm/bridge: Add a drm_bridge_state object Boris Brezillon
2020-01-28 13:55 ` [PATCH v10 02/12] drm/rcar-du: Plug atomic state hooks to the default implementation Boris Brezillon
2020-01-28 13:55 ` [PATCH v10 03/12] drm/bridge: analogix: " Boris Brezillon
2020-01-28 13:55 ` [PATCH v10 04/12] drm/bridge: Patch atomic hooks to take a drm_bridge_state Boris Brezillon
2020-01-28 13:55 ` [PATCH v10 05/12] drm/bridge: Add an ->atomic_check() hook Boris Brezillon
2020-01-28 13:55 ` [PATCH v10 06/12] drm/bridge: Add the necessary bits to support bus format negotiation Boris Brezillon
2020-01-28 13:55 ` [PATCH v10 07/12] drm/imx: pd: Use bus format/flags provided by the bridge when available Boris Brezillon
2020-01-28 13:55 ` Boris Brezillon [this message]
2020-02-24 23:03   ` [PATCH v10 08/12] drm/bridge: lvds-codec: Implement basic bus format negotiation Laurent Pinchart
2020-02-25  6:15     ` Sam Ravnborg
2020-02-25  8:44       ` Boris Brezillon
2020-01-28 13:55 ` [PATCH v10 09/12] dt-bindings: display: bridge: lvds-codec: Add new bus-width prop Boris Brezillon
2020-01-31 17:12   ` Sam Ravnborg
2020-01-31 17:23     ` Boris Brezillon
2020-02-24 22:31   ` Laurent Pinchart
2020-02-25  9:13     ` Boris Brezillon
2020-03-09 10:35       ` Boris Brezillon
2020-01-28 13:55 ` [PATCH v10 10/12] drm/bridge: panel: Propage bus format/flags Boris Brezillon
2020-01-31 17:25   ` Boris Brezillon
2020-02-24 22:34     ` Laurent Pinchart
2020-02-25  8:45       ` Boris Brezillon
2020-01-28 13:55 ` [PATCH v10 11/12] drm/panel: simple: Fix the lt089ac29000 bus_format Boris Brezillon
2020-01-28 13:55 ` [PATCH v10 12/12] ARM: dts: imx: imx51-zii-rdu1: Fix the display pipeline definition Boris Brezillon
2020-01-31 15:42 ` [PATCH v10 00/12] drm: Add support for bus-format negotiation Boris Brezillon
2020-01-31 16:51   ` Sam Ravnborg
2020-01-31 18:08   ` Daniel Vetter

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200128135514.108171-9-boris.brezillon@collabora.com \
    --to=boris.brezillon@collabora.com \
    --cc=Laurent.pinchart@ideasonboard.com \
    --cc=a.hajda@samsung.com \
    --cc=andrew.smirnov@gmail.com \
    --cc=cphealy@gmail.com \
    --cc=devicetree@vger.kernel.org \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=intel-gfx-trybot@lists.freedesktop.org \
    --cc=jernej.skrabec@siol.net \
    --cc=jonas@kwiboo.se \
    --cc=kernel@collabora.com \
    --cc=mark.rutland@arm.com \
    --cc=narmstrong@baylibre.com \
    --cc=nikita.yoush@cogentembedded.com \
    --cc=robh+dt@kernel.org \
    --cc=sam@ravnborg.org \
    --cc=thierry.reding@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).