[PATCH RESEND] drm/mcde: Fix Sphinx formatting

["Jonathan Neuschäfer" <j.neuschaefer@gmx.net>]

- Format the pipe diagram as a monospace block.
- Fix formatting of the list. Without the empty line, the first dash is
  not parsed as a bullet point.

Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
---
Previous copy: https://lore.kernel.org/lkml/20191002153827.23026-2-j.neuschaefer@gmx.net/

It seems that this patch got lost, somehow.
---
 drivers/gpu/drm/mcde/mcde_drv.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/mcde/mcde_drv.c b/drivers/gpu/drm/mcde/mcde_drv.c
index 9a09eba53182..c535abed4765 100644
--- a/drivers/gpu/drm/mcde/mcde_drv.c
+++ b/drivers/gpu/drm/mcde/mcde_drv.c
@@ -20,11 +20,11 @@
  * input formats including most variants of RGB and YUV.
  *
  * The hardware has four display pipes, and the layout is a little
- * bit like this:
+ * bit like this::
  *
- * Memory     -> Overlay -> Channel -> FIFO -> 5 formatters -> DSI/DPI
- * External      0..5       0..3       A,B,    3 x DSI         bridge
- * source 0..9                         C0,C1   2 x DPI
+ *   Memory     -> Overlay -> Channel -> FIFO -> 5 formatters -> DSI/DPI
+ *   External      0..5       0..3       A,B,    3 x DSI         bridge
+ *   source 0..9                         C0,C1   2 x DPI
  *
  * FIFOs A and B are for LCD and HDMI while FIFO CO/C1 are for
  * panels with embedded buffer.
@@ -43,6 +43,7 @@
  * to change as we exploit more of the hardware capabilities.
  *
  * TODO:
+ *
  * - Enabled damaged rectangles using drm_plane_enable_fb_damage_clips()
  *   so we can selectively just transmit the damaged area to a
  *   command-only display.
--
2.20.1

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel