dri-devel.lists.freedesktop.org archive mirror
 help / color / mirror / Atom feed
From: "Clément Péron" <peron.clem@gmail.com>
To: Rob Herring <robh@kernel.org>,
	Tomeu Vizoso <tomeu.vizoso@collabora.com>,
	Steven Price <steven.price@arm.com>,
	Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>,
	Viresh Kumar <vireshk@kernel.org>, Nishanth Menon <nm@ti.com>,
	Stephen Boyd <sboyd@kernel.org>,
	Maxime Ripard <mripard@kernel.org>, Chen-Yu Tsai <wens@csie.org>
Cc: "Clément Péron" <peron.clem@gmail.com>,
	linux-kernel@vger.kernel.org, dri-devel@lists.freedesktop.org
Subject: [PATCH 10/15] drm/panfrost: add regulators to devfreq
Date: Sun, 10 May 2020 18:55:33 +0200	[thread overview]
Message-ID: <20200510165538.19720-11-peron.clem@gmail.com> (raw)
In-Reply-To: <20200510165538.19720-1-peron.clem@gmail.com>

Some OPP tables specify voltage for each frequency. Devfreq can
handle these regulators but they should be get only 1 time to avoid
issue and know who is in charge.

If OPP table is probe don't init regulator.

Signed-off-by: Clément Péron <peron.clem@gmail.com>
---
 drivers/gpu/drm/panfrost/panfrost_devfreq.c | 19 +++++++++++++++++++
 drivers/gpu/drm/panfrost/panfrost_devfreq.h |  2 ++
 drivers/gpu/drm/panfrost/panfrost_device.c  | 11 +++++++----
 3 files changed, 28 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/panfrost/panfrost_devfreq.c b/drivers/gpu/drm/panfrost/panfrost_devfreq.c
index fce21c682414..9ffea0d4a087 100644
--- a/drivers/gpu/drm/panfrost/panfrost_devfreq.c
+++ b/drivers/gpu/drm/panfrost/panfrost_devfreq.c
@@ -93,6 +93,7 @@ int panfrost_devfreq_init(struct panfrost_device *pfdev)
 	unsigned long cur_freq;
 	struct device *dev = &pfdev->pdev->dev;
 	struct devfreq *devfreq;
+	struct opp_table *opp_table;
 	struct thermal_cooling_device *cooling;
 	struct panfrost_devfreq *pfdevfreq = &pfdev->pfdevfreq;
 
@@ -102,6 +103,19 @@ int panfrost_devfreq_init(struct panfrost_device *pfdev)
 
 	spin_lock_init(&pfdevfreq->lock);
 
+	opp_table = dev_pm_opp_set_regulators(dev, pfdev->comp->supply_names,
+					      pfdev->comp->num_supplies);
+	if (IS_ERR(opp_table)) {
+		ret = PTR_ERR(opp_table);
+		/* Continue if the optional regulator is missing */
+		if (ret != -ENODEV) {
+			DRM_DEV_ERROR(dev, "Couldn't set OPP regulators\n");
+			goto err_fini;
+		}
+	} else {
+		pfdevfreq->regulators_opp_table = opp_table;
+	}
+
 	ret = dev_pm_opp_of_add_table(dev);
 	if (ret) {
 		DRM_DEV_ERROR(dev, "Couldn't add OPP table\n");
@@ -157,6 +171,11 @@ void panfrost_devfreq_fini(struct panfrost_device *pfdev)
 		dev_pm_opp_of_remove_table(&pfdev->pdev->dev);
 		pfdevfreq->opp_of_table_added = false;
 	}
+
+	if (pfdevfreq->regulators_opp_table) {
+		dev_pm_opp_put_regulators(pfdevfreq->regulators_opp_table);
+		pfdevfreq->regulators_opp_table = NULL;
+	}
 }
 
 void panfrost_devfreq_resume(struct panfrost_device *pfdev)
diff --git a/drivers/gpu/drm/panfrost/panfrost_devfreq.h b/drivers/gpu/drm/panfrost/panfrost_devfreq.h
index add203cb00c2..347cde4786cf 100644
--- a/drivers/gpu/drm/panfrost/panfrost_devfreq.h
+++ b/drivers/gpu/drm/panfrost/panfrost_devfreq.h
@@ -8,12 +8,14 @@
 #include <linux/ktime.h>
 
 struct devfreq;
+struct opp_table;
 struct thermal_cooling_device;
 
 struct panfrost_device;
 
 struct panfrost_devfreq {
 	struct devfreq *devfreq;
+	struct opp_table *regulators_opp_table;
 	struct thermal_cooling_device *cooling;
 	bool opp_of_table_added;
 
diff --git a/drivers/gpu/drm/panfrost/panfrost_device.c b/drivers/gpu/drm/panfrost/panfrost_device.c
index 67eedf64e82d..8b17fb2e3369 100644
--- a/drivers/gpu/drm/panfrost/panfrost_device.c
+++ b/drivers/gpu/drm/panfrost/panfrost_device.c
@@ -222,10 +222,13 @@ int panfrost_device_init(struct panfrost_device *pfdev)
 		goto err_out0;
 	}
 
-	err = panfrost_regulator_init(pfdev);
-	if (err) {
-		dev_err(pfdev->dev, "regulator init failed %d\n", err);
-		goto err_out1;
+	/* OPP will handle regulators */
+	if (!pfdev->pfdevfreq.opp_of_table_added) {
+		err = panfrost_regulator_init(pfdev);
+		if (err) {
+			dev_err(pfdev->dev, "regulator init failed %d\n", err);
+			goto err_out1;
+		}
 	}
 
 	err = panfrost_reset_init(pfdev);
-- 
2.20.1

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

  parent reply	other threads:[~2020-05-11  7:18 UTC|newest]

Thread overview: 36+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-05-10 16:55 [PATCH 00/15][RFC] Add regulator devfreq support to Panfrost Clément Péron
2020-05-10 16:55 ` [PATCH 01/15] drm/panfrost: avoid static declaration Clément Péron
2020-05-28 13:22   ` Steven Price
2020-05-10 16:55 ` [PATCH 02/15] drm/panfrost: clean headers in devfreq Clément Péron
2020-05-28 13:22   ` Steven Price
2020-05-10 16:55 ` [PATCH 03/15] drm/panfrost: don't use pfdevfreq.busy_count to know if hw is idle Clément Péron
2020-05-28 13:22   ` Steven Price
2020-05-10 16:55 ` [PATCH 04/15] drm/panfrost: introduce panfrost_devfreq struct Clément Péron
2020-05-28 13:22   ` Steven Price
2020-05-10 16:55 ` [PATCH 05/15] drm/panfrost: use spinlock instead of atomic Clément Péron
2020-05-28 13:22   ` Steven Price
2020-05-29 12:20   ` Robin Murphy
2020-05-29 12:35     ` Clément Péron
2020-05-29 12:47       ` Steven Price
2020-05-10 16:55 ` [PATCH 06/15] drm/panfrost: properly handle error in probe Clément Péron
2020-05-28 13:22   ` Steven Price
2020-05-10 16:55 ` [PATCH 07/15] drm/panfrost: use device_property_present to check for OPP Clément Péron
2020-05-28 13:22   ` Steven Price
2020-05-29 12:45     ` Clément Péron
2020-05-10 16:55 ` [PATCH 08/15] drm/panfrost: move devfreq_init()/fini() in device Clément Péron
2020-05-28 13:22   ` Steven Price
2020-05-29 12:38     ` Clément Péron
2020-06-08 11:55       ` Tomeu Vizoso
2020-05-10 16:55 ` [PATCH 09/15] drm/panfrost: dynamically alloc regulators Clément Péron
2020-05-28 13:22   ` Steven Price
2020-05-10 16:55 ` Clément Péron [this message]
2020-05-28 13:23   ` [PATCH 10/15] drm/panfrost: add regulators to devfreq Steven Price
2020-05-29 12:37     ` Clément Péron
2020-05-10 16:55 ` [PATCH 11/15] drm/panfrost: set devfreq clock name Clément Péron
2020-05-28 13:23   ` Steven Price
2020-05-29 12:35     ` Clément Péron
2020-05-10 16:55 ` [PATCH 12/15] arm64: defconfig: Enable devfreq cooling device Clément Péron
2020-05-10 16:55 ` [PATCH 13/15] arm64: dts: allwinner: h6: Add cooling map for GPU Clément Péron
2020-05-10 16:55 ` [PATCH 14/15] [DO NOT MERGE] arm64: dts: allwinner: h6: Add GPU OPP table Clément Péron
2020-05-10 16:55 ` [PATCH 15/15] [DO NOT MERGE] arm64: dts: allwinner: force GPU regulator to be always Clément Péron
2020-05-11  5:43 ` [PATCH 00/15][RFC] Add regulator devfreq support to Panfrost Tomeu Vizoso

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200510165538.19720-11-peron.clem@gmail.com \
    --to=peron.clem@gmail.com \
    --cc=alyssa.rosenzweig@collabora.com \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mripard@kernel.org \
    --cc=nm@ti.com \
    --cc=robh@kernel.org \
    --cc=sboyd@kernel.org \
    --cc=steven.price@arm.com \
    --cc=tomeu.vizoso@collabora.com \
    --cc=vireshk@kernel.org \
    --cc=wens@csie.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).