Hi Eric, On Wed, May 27, 2020 at 12:40:02PM -0700, Eric Anholt wrote: > On Wed, May 27, 2020 at 8:50 AM Maxime Ripard wrote: > > > > At boot time, if we detect that a pixelvalve has been enabled, we need to > > be able to retrieve the HVS channel it has been assigned to so that we can > > disable that channel too. Let's create that function that returns the FIFO > > or an error from a given output. > > > > Signed-off-by: Maxime Ripard > > --- > > > +int vc4_hvs_get_fifo_from_output(struct drm_device *dev, unsigned int output) > > +{ > > + struct vc4_dev *vc4 = to_vc4_dev(dev); > > + u32 reg; > > + int ret; > > + > > + switch (output) { > > + case 0: > > + return 0; > > + > > + case 1: > > + return 1; > > + > > + case 2: > > + reg = HVS_READ(SCALER_DISPECTRL); > > + ret = FIELD_GET(SCALER_DISPECTRL_DSP2_MUX_MASK, reg); > > + if (ret == 0) > > + return 2; > > + > > + return 0; > > + > > + case 3: > > + reg = HVS_READ(SCALER_DISPCTRL); > > + ret = FIELD_GET(SCALER_DISPCTRL_DSP3_MUX_MASK, reg); > > + if (ret == 3) > > + return -EPIPE; > > + > > + return ret; > > + > > + case 4: > > + reg = HVS_READ(SCALER_DISPEOLN); > > + ret = FIELD_GET(SCALER_DISPEOLN_DSP4_MUX_MASK, reg); > > + if (ret == 3) > > + return -EPIPE; > > + > > + return ret; > > + > > + case 5: > > + reg = HVS_READ(SCALER_DISPDITHER); > > + ret = FIELD_GET(SCALER_DISPDITHER_DSP5_MUX_MASK, reg); > > + if (ret == 3) > > + return -EPIPE; > > Oh, FIELD_GET is new to me. Looks like we should replace > VC4_GET_FIELD usage with just using that header, and also > VC4_SET_FIELD with WARN_ON(!FIELD_FIT()); FIELD_PREP. > > Could you follow up with that? I will :) > Other than that, 54-67 r-b. Thanks! Maxime