Re: [PATCH] staging: rtl8723bs: Use shared header constants

[Dan Carpenter <dan.carpenter@oracle.com>]

[-- Attachment #1: Type: text/plain, Size: 2166 bytes --]

On Wed, May 27, 2020 at 09:33:03PM +0100, Pascal Terjan wrote:
> On Wed, 27 May 2020 at 20:48, Dan Carpenter <dan.carpenter@oracle.com> wrote:
> > >       /* eth_type = (psnap_type[0] << 8) | psnap_type[1]; */
> > > -     if ((!memcmp(psnap, rtw_rfc1042_header, SNAP_SIZE) &&
> > > -             (memcmp(psnap_type, SNAP_ETH_TYPE_IPX, 2)) &&
> > > -             (memcmp(psnap_type, SNAP_ETH_TYPE_APPLETALK_AARP, 2))) ||
> > > -             /* eth_type != ETH_P_AARP && eth_type != ETH_P_IPX) || */
> > > -              !memcmp(psnap, rtw_bridge_tunnel_header, SNAP_SIZE)) {
> > > +     if ((!memcmp(psnap, rfc1042_header, SNAP_SIZE) &&
> > > +          memcmp(psnap_type, SNAP_ETH_TYPE_IPX, 2) &&
> > > +          memcmp(psnap_type, SNAP_ETH_TYPE_APPLETALK_AARP, 2)) ||
> > > +         /* eth_type != ETH_P_AARP && eth_type != ETH_P_IPX) || */
> > > +         !memcmp(psnap, bridge_tunnel_header, SNAP_SIZE)) {
> > >               /* remove RFC1042 or Bridge-Tunnel encapsulation and replace EtherType */
> > >               bsnaphdr = true;
> >
> > Your indenting is correct, but I would probably do that in a separate
> > patch.  It makes it harder to review.  Also probably delete the
> > commented out code.  Do you see how if we don't touch the indenting then
> > it doesn't raise the question about if we should delete the comments as
> > well?
> 
> I initially didn't want to change it but checkpatch was sad which
> makes me sad, maybe I should have cleaned up this area in a first
> trivial patch before touching that line.

Just ignore checkpatch in this case because it's not a warning that your
patch introduced.

Say if you re-name a function, then you *must* re-indent the parameters
because that's a warning the change introduces.  If there is a
checkpatch warning and it's on a line that you touch then you can change
that.  But once you start changing other nearby lines you might run into
trouble.

The other thing that you fixed is you removed unnecessary parentheses
and that's good but it actually broke my review script for renaming
variables.  (Attached).  I do `cat email.txt | rename_rev.pl -a`  It's
easier in mutt.

regards,
dan carpenter

[-- Attachment #2: rename_rev.pl --]
[-- Type: text/x-perl, Size: 11192 bytes --]

#!/usr/bin/perl

# This is a tool to help review variable rename patches. The goal is
# to strip out the automatic sed renames and the white space changes
# and leaves the interesting code changes.
#
# Example 1: A patch renames openInfo to open_info:
#     cat diff | rename_review.pl openInfo open_info
#
# Example 2: A patch swaps the first two arguments to some_func():
#     cat diff | rename_review.pl \
#                    -e 's/some_func\((.*?),(.*?),/some_func\($2, $1,/'
#
# Example 3: A patch removes the xkcd_ prefix from some but not all the
# variables.  Instead of trying to figure out which variables were renamed
# just remove the prefix from them all:
#     cat diff | rename_review.pl -ea 's/xkcd_//g'
#
# Example 4: A patch renames 20 CamelCase variables.  To review this let's
# just ignore all case changes and all '_' chars.
#     cat diff | rename_review -ea 'tr/[A-Z]/[a-z]/' -ea 's/_//g'
#
# The other arguments are:
# -nc removes comments
# -ns removes '\' chars if they are at the end of the line.

use strict;
use File::Temp qw/ :mktemp  /;

sub usage() {
    print "usage: cat diff | $0 old new old new old new...\n";
    print "   or: cat diff | $0 -e 's/old/new/g'\n";
    print " -a : auto";
    print " -e : execute on old lines\n";
    print " -ea: execute on all lines\n";
    print " -nc: no comments\n";
    print " -nb: no unneeded braces\n";
    print " -ns: no slashes at the end of a line\n";
    print " -pull: for function pull.  deletes context.\n";
    print " -r <recipe>: NULL, bool";
    exit(1);
}
my @subs;
my @strict_subs;
my @cmds;
my $strip_comments;
my $strip_braces;
my $strip_slashes;
my $pull_context;
my $auto;

sub filter($) {
    my $line = shift();
    my $old = 0;
    if ($line =~ /^-/) {
        $old = 1;
    }
    # remove the first char
    $line =~ s/^[ +-]//;
    if ($strip_comments) {
        $line =~ s/\/\*.*?\*\///g;
        $line =~ s/\/\/.*//;
    }
    foreach my $cmd (@cmds) {
        if ($old || $cmd->[0] =~ /^-ea$/) {
            eval "\$line =~ $cmd->[1]";
        }
    }
    foreach my $sub (@subs) {
        if ($old) {
            $line =~ s/$sub->[0]/$sub->[1]/g;
        }
    }
    foreach my $sub (@strict_subs) {
        if ($old) {
            $line =~ s/\b$sub->[0]\b/$sub->[1]/g;
        }
    }

    # remove the newline so we can move curly braces here if we want.
    $line =~ s/\n//;
    return $line;
}

while (my $param1 = shift()) {
    if ($param1 =~ /^-a$/) {
        $auto = 1;
        next;
    }
    if ($param1 =~ /^-nc$/) {
        $strip_comments = 1;
        next;
    }
    if ($param1 =~ /^-nb$/) {
        $strip_braces = 1;
        next;
    }
    if ($param1 =~ /^-ns$/) {
        $strip_slashes = 1;
        next;
    }
    if ($param1 =~ /^-pull$/) {
        $pull_context = 1;
        next;
    }
    my $param2 = shift();
    if ($param2 =~ /^$/) {
        usage();
    }
    if ($param1 =~ /^-e(a|)$/) {
        push @cmds, [$param1, $param2];
        next;
    }
    if ($param1 =~ /^-r$/) {
        if ($param2 =~ /bool/) {
            push @cmds, ["-e", "s/== true//"];
            push @cmds, ["-e", "s/true ==//"];
            push @cmds, ["-e", "s/([a-zA-Z\-\>\._]+) == false/!\$1/"];
            next;
        } elsif ($param2 =~ /NULL/) {
            push @cmds, ["-e", "s/ != NULL//"];
            push @cmds, ["-e", "s/([a-zA-Z\-\>\._0-9]+) == NULL/!\$1/"];
            next;
        } elsif ($param2 =~ /^BIT$/) {
            push @cmds, ["-e", 's/1[uU]* *<< *(\d+)/BIT($1)/'];
            push @cmds, ["-e", 's/\(1 *<< *(\w+)\)/BIT($1)/'];
            push @cmds, ["-e", 's/\(BIT\((.*?)\)\)/BIT($1)/'];
            next;
        } elsif ($param2 =~ /^HBIT$/) {
            push @cmds, ["-e", 's/0x0*1\b/BIT(0)/'];
            push @cmds, ["-e", 's/0x0*2\b/BIT(1)/'];
            push @cmds, ["-e", 's/0x0*4\b/BIT(2)/'];
            push @cmds, ["-e", 's/0x0*8\b/BIT(3)/'];
            push @cmds, ["-e", 's/0x0*10\b/BIT(4)/'];
            push @cmds, ["-e", 's/0x0*20\b/BIT(5)/'];
            push @cmds, ["-e", 's/0x0*40\b/BIT(6)/'];
            push @cmds, ["-e", 's/0x0*80\b/BIT(7)/'];
            next;
        }

        usage();
    }

    push @subs, [$param1, $param2];
}

my ($oldfh, $oldfile) = mkstemp("/tmp/oldXXXXX");
my ($newfh, $newfile) = mkstemp("/tmp/newXXXXX");

my @input = <STDIN>;

# auto works on the observation that the - line comes before the + line when we
# rename variables.  Take the first - line.  Find the first + line.  Find the
# one word difference.  Test that the old word never occurs in the new text.
if ($auto) {
    my %c_keywords = (  auto => 1,
                        break => 1,
                        case => 1,
                        char => 1,
                        const => 1,
                        continue => 1,
                        default => 1,
                        do => 1,
                        double => 1,
                        else => 1,
                        enum => 1,
                        extern => 1,
                        float => 1,
                        for => 1,
                        goto => 1,
                        if => 1,
                        int => 1,
                        long => 1,
                        register => 1,
                        return => 1,
                        short => 1,
                        signed => 1,
                        sizeof => 1,
                        static => 1,
                        struct => 1,
                        switch => 1,
                        typedef => 1,
                        union => 1,
                        unsigned => 1,
                        void => 1,
                        volatile => 1,
                        while => 1);
    my %old_words;
    my %new_words;
    my %added_cmds;
    my @new_subs;

    my $inside = 0;
    foreach my $line (@input) {
        if ($line =~ /^(---|\+\+\+)/) {
            next;
        }

        if ($line =~ /^@/) {
            $inside = 1;
        }
        if ($inside && !(($_ =~ /^[- @+]/) || ($_ =~ /^$/))) {
            $inside = 0;
        }
        if (!$inside) {
            next;
        }

        if ($line =~ /^-/) {
            s/-//;
            my @words = split(/\W+/, $line);
            foreach my $word (@words) {
                $old_words{$word} = 1;
            }
        } elsif ($line =~ /^\+/) {
            s/\+//;
            my @words = split(/\W+/, $line);
            foreach my $word (@words) {
                $new_words{$word} = 1;
            }
        }
    }

    my $old_line;
    my $new_line;
    $inside = 0;
    foreach my $line (@input) {
        if ($line =~ /^(---|\+\+\+)/) {
            next;
        }

        if ($line =~ /^@/) {
            $inside = 1;
        }
        if ($inside && !(($_ =~ /^[- @+]/) || ($_ =~ /^$/))) {
            $inside = 0;
        }
        if (!$inside) {
            next;
        }


        if ($line =~ /^-/ && !$old_line) {
            s/^-//;
            $old_line = $line;
            next;
        } elsif ($old_line && $line =~ /^\+/) {
            s/^\+//;
            $new_line = $line;
        } else {
            next;
        }

        my @old_words = split(/\W+/, $old_line);
        my @new_words = split(/\W+/, $new_line);
        my @new_cmds;

        my $i;
        my $diff_count = 0;
        for ($i = 0; ; $i++) {
            if (!defined($old_words[$i]) && !defined($new_words[$i])) {
                last;
            }
            if (!defined($old_words[$i]) || !defined($new_words[$i])) {
                $diff_count = 1000;
                last;
            }
            if ($old_words[$i] eq $new_words[$i]) {
                next;
            }
            if ($c_keywords{$old_words[$i]}) {
                $diff_count = 1000;
                last;
            }
            if ($new_words{$old_words[$i]}) {
                $diff_count++;
            }
            push @new_cmds, [$old_words[$i], $new_words[$i]];
        }
        if ($diff_count <= 2) {
            foreach my $sub (@new_cmds) {
                if ($added_cmds{$sub->[0] . $sub->[1]}) {
                    next;
                }
                $added_cmds{$sub->[0] . $sub->[1]} = 1;
                push @new_subs, [$sub->[0] , $sub->[1]];
            }
        }

        $old_line = 0;
    }

    if (@new_subs) {
        print "RENAMES:\n";
        foreach my $sub (@new_subs) {
            print "$sub->[0] => $sub->[1]\n";
            push @strict_subs, [$sub->[0] , $sub->[1]];
        }
        print "---\n";
    }
}

my $output;

#recreate an old file and a new file
my $inside = 0;
foreach (@input) {
    if ($pull_context && !($_ =~ /^[+-@]/)) {
        next;
    }

    if ($_ =~ /^(---|\+\+\+)/) {
        next;
    }

    if ($_ =~ /^@/) {
        $inside = 1;
    }
    if ($inside && !(($_ =~ /^[- @+]/) || ($_ =~ /^$/))) {
        $inside = 0;
    }
    if (!$inside) {
        next;
    }

    $output = filter($_);

    if ($strip_braces && $_ =~ /^(\+|-)\W+{/) {
        $output =~ s/^[\t ]+(.*)/ $1/;
    } else {
        $output = "\n" . $output;
    }

    if ($_ =~ /^-/) {
        print $oldfh $output;
        next;
    }
    if ($_ =~ /^\+/) {
        print $newfh $output;
        next;
    }
    print $oldfh $output;
    print $newfh $output;

}
print $oldfh "\n";
print $newfh "\n";
# git diff puts a -- and version at the end of the diff.  put the -- into the
# new file as well so it's ignored
if ($output =~ /\n-/) {
    print $newfh "-\n";
}

my $hunk;
my $old_txt;
my $new_txt;

open diff, "diff -uw $oldfile $newfile |";
while (<diff>) {
    if ($_ =~ /^(---|\+\+\+)/) {
        next;
    }

    if ($_ =~ /^@/) {

        if ($strip_comments) {
            $old_txt =~ s/\/\*.*?\*\///g;
            $new_txt =~ s/\/\*.*?\*\///g;
        }
        if ($strip_braces) {
            $old_txt =~ s/{([^;{]*?);}/$1;/g;
            $new_txt =~ s/{([^;{]*?);}/$1;/g;
            # this is a hack because i don't know how to replace nested
            # unneeded curly braces.
            $old_txt =~ s/{([^;{]*?);}/$1;/g;
            $new_txt =~ s/{([^;{]*?);}/$1;/g;
        }

        if ($old_txt ne $new_txt) {
            print $hunk;
            print $_;
        }
        $hunk = "";
        $old_txt = "";
        $new_txt = "";
        next;
    }

    $hunk = $hunk . $_;

    if ($strip_slashes) {
        s/\\$//;
    }

    if ($_ =~ /^-/) {
        s/-//;
        s/[ \t\n]//g;
        $old_txt = $old_txt . $_;
        next;
    }
    if ($_ =~ /^\+/) {
        s/\+//;
        s/[ \t\n]//g;
        $new_txt = $new_txt . $_;
        next;
    }
    if ($_ =~ /^ /) {
        s/^ //;
        s/[ \t\n]//g;
        $old_txt = $old_txt . $_;
        $new_txt = $new_txt . $_;
    }
}

if ($old_txt ne $new_txt) {
    if ($strip_comments) {
        $old_txt =~ s/\/\*.*?\*\///g;
        $new_txt =~ s/\/\*.*?\*\///g;
    }
    if ($strip_braces) {
        $old_txt =~ s/{([^;{]*?);}/$1;/g;
        $new_txt =~ s/{([^;{]*?);}/$1;/g;
        $old_txt =~ s/{([^;{]*?);}/$1;/g;
        $new_txt =~ s/{([^;{]*?);}/$1;/g;
    }

    print $hunk;
}

unlink($oldfile);
unlink($newfile);

print "\ndone.\n";

[-- Attachment #3: Type: text/plain, Size: 169 bytes --]

_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel