On Tue, Oct 27, 2020 at 10:31:19AM +0100, Paul Kocialkowski wrote:
> Hi,
> 
> On Mon 26 Oct 20, 17:00, Maxime Ripard wrote:
> > On Fri, Oct 23, 2020 at 07:45:37PM +0200, Paul Kocialkowski wrote:
> > > Bits related to the interface data width do not have any effect when
> > > the CSI controller is taking input from the MIPI CSI-2 controller.
> > 
> > I guess it would be clearer to mention that the data width is only
> > applicable for parallel here.
> 
> Understood, will change the wording in the next version.
> 
> > > In prevision of adding support for this case, set these bits
> > > conditionally so there is no ambiguity.
> > > 
> > > Co-developed-by: Kévin L'hôpital <kevin.lhopital@bootlin.com>
> > > Signed-off-by: Kévin L'hôpital <kevin.lhopital@bootlin.com>
> > > Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
> > > ---
> > >  .../platform/sunxi/sun6i-csi/sun6i_csi.c      | 42 +++++++++++--------
> > >  1 file changed, 25 insertions(+), 17 deletions(-)
> > > 
> > > diff --git a/drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.c b/drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.c
> > > index 5d2389a5cd17..a876a05ea3c7 100644
> > > --- a/drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.c
> > > +++ b/drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.c
> > > @@ -378,8 +378,13 @@ static void sun6i_csi_setup_bus(struct sun6i_csi_dev *sdev)
> > >  	unsigned char bus_width;
> > >  	u32 flags;
> > >  	u32 cfg;
> > > +	bool input_parallel = false;
> > >  	bool input_interlaced = false;
> > >  
> > > +	if (endpoint->bus_type == V4L2_MBUS_PARALLEL ||
> > > +	    endpoint->bus_type == V4L2_MBUS_BT656)
> > > +		input_parallel = true;
> > > +
> > >  	if (csi->config.field == V4L2_FIELD_INTERLACED
> > >  	    || csi->config.field == V4L2_FIELD_INTERLACED_TB
> > >  	    || csi->config.field == V4L2_FIELD_INTERLACED_BT)
> > > @@ -395,6 +400,26 @@ static void sun6i_csi_setup_bus(struct sun6i_csi_dev *sdev)
> > >  		 CSI_IF_CFG_HREF_POL_MASK | CSI_IF_CFG_FIELD_MASK |
> > >  		 CSI_IF_CFG_SRC_TYPE_MASK);
> > >  
> > > +	if (input_parallel) {
> > > +		switch (bus_width) {
> > > +		case 8:
> > > +			cfg |= CSI_IF_CFG_IF_DATA_WIDTH_8BIT;
> > > +			break;
> > > +		case 10:
> > > +			cfg |= CSI_IF_CFG_IF_DATA_WIDTH_10BIT;
> > > +			break;
> > > +		case 12:
> > > +			cfg |= CSI_IF_CFG_IF_DATA_WIDTH_12BIT;
> > > +			break;
> > > +		case 16: /* No need to configure DATA_WIDTH for 16bit */
> > > +			break;
> > > +		default:
> > > +			dev_warn(sdev->dev, "Unsupported bus width: %u\n",
> > > +				 bus_width);
> > > +			break;
> > > +		}
> > > +	}
> > > +
> > >  	if (input_interlaced)
> > >  		cfg |= CSI_IF_CFG_SRC_TYPE_INTERLACED;
> > >  	else
> > > @@ -440,23 +465,6 @@ static void sun6i_csi_setup_bus(struct sun6i_csi_dev *sdev)
> > >  		break;
> > >  	}
> > >  
> > > -	switch (bus_width) {
> > > -	case 8:
> > > -		cfg |= CSI_IF_CFG_IF_DATA_WIDTH_8BIT;
> > > -		break;
> > > -	case 10:
> > > -		cfg |= CSI_IF_CFG_IF_DATA_WIDTH_10BIT;
> > > -		break;
> > > -	case 12:
> > > -		cfg |= CSI_IF_CFG_IF_DATA_WIDTH_12BIT;
> > > -		break;
> > > -	case 16: /* No need to configure DATA_WIDTH for 16bit */
> > > -		break;
> > > -	default:
> > > -		dev_warn(sdev->dev, "Unsupported bus width: %u\n", bus_width);
> > > -		break;
> > > -	}
> > > -
> > 
> > Is there any reason to move it around?
> 
> The main reason is cosmetics: input_parallel is introduced to match the already
> existing input_interlaced variable, so it made sense to me to have both of these
> conditionals one after the other instead of spreading them randomly.
> 
> I can mention this in the commit log if you prefer.

Yeah, that would great

Maxime