From: "Darrick J. Wong" <djwong@kernel.org>
To: djwong@kernel.org, guaneryu@gmail.com
Cc: linux-xfs@vger.kernel.org, fstests@vger.kernel.org, guan@eryu.me
Subject: [PATCH 06/10] xfs: test quota softlimit warning functionality
Date: Mon, 08 Mar 2021 20:40:36 -0800 [thread overview]
Message-ID: <161526483668.1214319.17667836667890283825.stgit@magnolia> (raw)
In-Reply-To: <161526480371.1214319.3263690953532787783.stgit@magnolia>
From: Darrick J. Wong <djwong@kernel.org>
Make sure that quota softlimits work, which is to say that one can
exceed the softlimit up to warnlimit times before it starts enforcing
that.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
---
tests/xfs/915 | 162 +++++++++++++++++++++++++++++++++++++++++++++++++++++
tests/xfs/915.out | 151 +++++++++++++++++++++++++++++++++++++++++++++++++
tests/xfs/group | 1
3 files changed, 314 insertions(+)
create mode 100755 tests/xfs/915
create mode 100644 tests/xfs/915.out
diff --git a/tests/xfs/915 b/tests/xfs/915
new file mode 100755
index 00000000..a2cdbbb7
--- /dev/null
+++ b/tests/xfs/915
@@ -0,0 +1,162 @@
+#! /bin/bash
+# SPDX-License-Identifier: GPL-2.0-or-later
+# Copyright (c) 2021 Oracle. All Rights Reserved.
+#
+# FS QA Test No. 915
+#
+# Check that quota softlimit warnings work the way they should. This means
+# that we can disobey the softlimit up to warnlimit times before it turns into
+# hard(er) enforcement. This is a functional test for quota warnings, but
+# since the functionality has been broken for decades, this is also a
+# regression test for commit 4b8628d57b72 ("xfs: actually bump warning counts
+# when we send warnings").
+
+seq=`basename $0`
+seqres=$RESULT_DIR/$seq
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1 # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+ cd /
+ rm -f $tmp.*
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+. ./common/quota
+
+# real QA test starts here
+_supported_fs xfs
+_require_xfs_quota
+_require_scratch
+
+rm -f $seqres.full
+
+qsetup()
+{
+ opt=$1
+ enforce=0
+ if [ $opt = "u" -o $opt = "uno" ]; then
+ type=u
+ eval `_choose_uid`
+ elif [ $opt = "g" -o $opt = "gno" ]; then
+ type=g
+ eval `_choose_gid`
+ elif [ $opt = "p" -o $opt = "pno" ]; then
+ type=p
+ eval `_choose_prid`
+ fi
+ [ $opt = "u" -o $opt = "g" -o $opt = "p" ] && enforce=1
+
+ echo "Using type=$type id=$id" >> $seqres.full
+}
+
+exercise() {
+ _scratch_mkfs_xfs | _filter_mkfs 2>$tmp.mkfs
+ cat $tmp.mkfs >>$seqres.full
+
+ # keep the blocksize and data size for dd later
+ . $tmp.mkfs
+
+ _qmount
+
+ qsetup $1
+
+ echo "Using type=$type id=$id" >>$seqres.full
+
+ echo
+ echo "*** report initial settings" | tee -a $seqres.full
+ $XFS_QUOTA_PROG -x \
+ -c "limit -$type isoft=3 ihard=500000 $id" \
+ -c "warn -$type -i -d 13" \
+ $SCRATCH_DEV
+ $XFS_QUOTA_PROG -x \
+ -c "state -$type" >> $seqres.full
+ $XFS_QUOTA_PROG -x \
+ -c "repquota -birnN -$type" $SCRATCH_DEV |
+ _filter_quota_report | LC_COLLATE=POSIX sort -ru
+
+ echo
+ echo "*** push past the soft inode limit" | tee -a $seqres.full
+ _file_as_id $SCRATCH_MNT/softok1 $id $type $bsize 0
+ _file_as_id $SCRATCH_MNT/softok2 $id $type $bsize 0
+ _file_as_id $SCRATCH_MNT/softok3 $id $type $bsize 0
+ _file_as_id $SCRATCH_MNT/softwarn1 $id $type $bsize 0
+ $XFS_QUOTA_PROG -D $tmp.projects -P $tmp.projid -x \
+ -c "repquota -birnN -$type" $SCRATCH_DEV |
+ _filter_quota_report | LC_COLLATE=POSIX sort -ru
+
+ echo
+ echo "*** push further past the soft inode limit" | tee -a $seqres.full
+ for warn_nr in $(seq 2 5); do
+ _file_as_id $SCRATCH_MNT/softwarn$warn_nr $id $type $bsize 0
+ done
+ $XFS_QUOTA_PROG -D $tmp.projects -P $tmp.projid -x \
+ -c "repquota -birnN -$type" $SCRATCH_DEV |
+ _filter_quota_report | LC_COLLATE=POSIX sort -ru
+
+ echo
+ echo "*** push past the soft inode warning limit" | tee -a $seqres.full
+ for warn_nr in $(seq 6 15); do
+ _file_as_id $SCRATCH_MNT/softwarn$warn_nr $id $type $bsize 0
+ done
+ $XFS_QUOTA_PROG -D $tmp.projects -P $tmp.projid -x \
+ -c "repquota -birnN -$type" $SCRATCH_DEV |
+ _filter_quota_report | LC_COLLATE=POSIX sort -ru
+
+ echo
+ echo "*** unmount"
+ _scratch_unmount
+}
+
+_scratch_mkfs > $seqres.full
+_scratch_mount >> $seqres.full
+
+chmod a+rwx $SCRATCH_MNT $seqres.full # arbitrary users will write here
+bsize=$(_get_file_block_size $SCRATCH_MNT)
+_scratch_unmount
+
+cat >$tmp.projects <<EOF
+1:$SCRATCH_MNT
+EOF
+
+cat >$tmp.projid <<EOF
+root:0
+scratch:1
+EOF
+
+projid_file="$tmp.projid"
+
+echo "*** user"
+_qmount_option "uquota"
+exercise u
+
+echo "*** group"
+_qmount_option "gquota"
+exercise g
+
+echo "*** uqnoenforce"
+_qmount_option "uqnoenforce"
+exercise uno
+
+echo "*** gqnoenforce"
+_qmount_option "gqnoenforce"
+exercise gno
+
+echo "*** pquota"
+_qmount_option "pquota"
+exercise p
+
+echo "*** pqnoenforce"
+_qmount_option "pqnoenforce"
+exercise pno
+
+# success, all done
+status=0
+exit
diff --git a/tests/xfs/915.out b/tests/xfs/915.out
new file mode 100644
index 00000000..c3bb855e
--- /dev/null
+++ b/tests/xfs/915.out
@@ -0,0 +1,151 @@
+QA output created by 915
+*** user
+meta-data=DDEV isize=XXX agcount=N, agsize=XXX blks
+data = bsize=XXX blocks=XXX, imaxpct=PCT
+ = sunit=XXX swidth=XXX, unwritten=X
+naming =VERN bsize=XXX
+log =LDEV bsize=XXX blocks=XXX
+realtime =RDEV extsz=XXX blocks=XXX, rtextents=XXX
+
+*** report initial settings
+[ROOT] 0 0 0 00 [--------] 3 0 0 13 [--------] 0 0 0 00 [--------]
+[NAME] 0 0 0 00 [--------] 0 3 500000 00 [--------] 0 0 0 00 [--------]
+
+*** push past the soft inode limit
+[ROOT] 0 0 0 00 [--------] 3 0 0 13 [--------] 0 0 0 00 [--------]
+[NAME] 0 0 0 00 [--------] 4 3 500000 01 [7 days] 0 0 0 00 [--------]
+
+*** push further past the soft inode limit
+[ROOT] 0 0 0 00 [--------] 3 0 0 13 [--------] 0 0 0 00 [--------]
+[NAME] 0 0 0 00 [--------] 8 3 500000 05 [7 days] 0 0 0 00 [--------]
+
+*** push past the soft inode warning limit
+[ROOT] 0 0 0 00 [--------] 3 0 0 13 [--------] 0 0 0 00 [--------]
+[NAME] 0 0 0 00 [--------] 16 3 500000 13 [7 days] 0 0 0 00 [--------]
+
+*** unmount
+*** group
+meta-data=DDEV isize=XXX agcount=N, agsize=XXX blks
+data = bsize=XXX blocks=XXX, imaxpct=PCT
+ = sunit=XXX swidth=XXX, unwritten=X
+naming =VERN bsize=XXX
+log =LDEV bsize=XXX blocks=XXX
+realtime =RDEV extsz=XXX blocks=XXX, rtextents=XXX
+
+*** report initial settings
+[ROOT] 0 0 0 00 [--------] 3 0 0 13 [--------] 0 0 0 00 [--------]
+[NAME] 0 0 0 00 [--------] 0 3 500000 00 [--------] 0 0 0 00 [--------]
+
+*** push past the soft inode limit
+[ROOT] 0 0 0 00 [--------] 3 0 0 13 [--------] 0 0 0 00 [--------]
+[NAME] 0 0 0 00 [--------] 4 3 500000 01 [7 days] 0 0 0 00 [--------]
+
+*** push further past the soft inode limit
+[ROOT] 0 0 0 00 [--------] 3 0 0 13 [--------] 0 0 0 00 [--------]
+[NAME] 0 0 0 00 [--------] 8 3 500000 05 [7 days] 0 0 0 00 [--------]
+
+*** push past the soft inode warning limit
+[ROOT] 0 0 0 00 [--------] 3 0 0 13 [--------] 0 0 0 00 [--------]
+[NAME] 0 0 0 00 [--------] 16 3 500000 13 [7 days] 0 0 0 00 [--------]
+
+*** unmount
+*** uqnoenforce
+meta-data=DDEV isize=XXX agcount=N, agsize=XXX blks
+data = bsize=XXX blocks=XXX, imaxpct=PCT
+ = sunit=XXX swidth=XXX, unwritten=X
+naming =VERN bsize=XXX
+log =LDEV bsize=XXX blocks=XXX
+realtime =RDEV extsz=XXX blocks=XXX, rtextents=XXX
+
+*** report initial settings
+[ROOT] 0 0 0 00 [--------] 3 0 0 13 [--------] 0 0 0 00 [--------]
+[NAME] 0 0 0 00 [--------] 0 3 500000 00 [--------] 0 0 0 00 [--------]
+
+*** push past the soft inode limit
+[ROOT] 0 0 0 00 [--------] 3 0 0 13 [--------] 0 0 0 00 [--------]
+[NAME] 0 0 0 00 [--------] 4 3 500000 00 [--------] 0 0 0 00 [--------]
+
+*** push further past the soft inode limit
+[ROOT] 0 0 0 00 [--------] 3 0 0 13 [--------] 0 0 0 00 [--------]
+[NAME] 0 0 0 00 [--------] 8 3 500000 00 [--------] 0 0 0 00 [--------]
+
+*** push past the soft inode warning limit
+[ROOT] 0 0 0 00 [--------] 3 0 0 13 [--------] 0 0 0 00 [--------]
+[NAME] 0 0 0 00 [--------] 18 3 500000 00 [--------] 0 0 0 00 [--------]
+
+*** unmount
+*** gqnoenforce
+meta-data=DDEV isize=XXX agcount=N, agsize=XXX blks
+data = bsize=XXX blocks=XXX, imaxpct=PCT
+ = sunit=XXX swidth=XXX, unwritten=X
+naming =VERN bsize=XXX
+log =LDEV bsize=XXX blocks=XXX
+realtime =RDEV extsz=XXX blocks=XXX, rtextents=XXX
+
+*** report initial settings
+[ROOT] 0 0 0 00 [--------] 3 0 0 13 [--------] 0 0 0 00 [--------]
+[NAME] 0 0 0 00 [--------] 0 3 500000 00 [--------] 0 0 0 00 [--------]
+
+*** push past the soft inode limit
+[ROOT] 0 0 0 00 [--------] 3 0 0 13 [--------] 0 0 0 00 [--------]
+[NAME] 0 0 0 00 [--------] 4 3 500000 00 [--------] 0 0 0 00 [--------]
+
+*** push further past the soft inode limit
+[ROOT] 0 0 0 00 [--------] 3 0 0 13 [--------] 0 0 0 00 [--------]
+[NAME] 0 0 0 00 [--------] 8 3 500000 00 [--------] 0 0 0 00 [--------]
+
+*** push past the soft inode warning limit
+[ROOT] 0 0 0 00 [--------] 3 0 0 13 [--------] 0 0 0 00 [--------]
+[NAME] 0 0 0 00 [--------] 18 3 500000 00 [--------] 0 0 0 00 [--------]
+
+*** unmount
+*** pquota
+meta-data=DDEV isize=XXX agcount=N, agsize=XXX blks
+data = bsize=XXX blocks=XXX, imaxpct=PCT
+ = sunit=XXX swidth=XXX, unwritten=X
+naming =VERN bsize=XXX
+log =LDEV bsize=XXX blocks=XXX
+realtime =RDEV extsz=XXX blocks=XXX, rtextents=XXX
+
+*** report initial settings
+[ROOT] 0 0 0 00 [--------] 3 0 0 13 [--------] 0 0 0 00 [--------]
+[NAME] 0 0 0 00 [--------] 0 3 500000 00 [--------] 0 0 0 00 [--------]
+
+*** push past the soft inode limit
+[ROOT] 0 0 0 00 [--------] 3 0 0 13 [--------] 0 0 0 00 [--------]
+[NAME] 0 0 0 00 [--------] 4 3 500000 02 [7 days] 0 0 0 00 [--------]
+
+*** push further past the soft inode limit
+[ROOT] 0 0 0 00 [--------] 3 0 0 13 [--------] 0 0 0 00 [--------]
+[NAME] 0 0 0 00 [--------] 8 3 500000 06 [7 days] 0 0 0 00 [--------]
+
+*** push past the soft inode warning limit
+[ROOT] 0 0 0 00 [--------] 3 0 0 13 [--------] 0 0 0 00 [--------]
+[NAME] 0 0 0 00 [--------] 15 3 500000 13 [7 days] 0 0 0 00 [--------]
+
+*** unmount
+*** pqnoenforce
+meta-data=DDEV isize=XXX agcount=N, agsize=XXX blks
+data = bsize=XXX blocks=XXX, imaxpct=PCT
+ = sunit=XXX swidth=XXX, unwritten=X
+naming =VERN bsize=XXX
+log =LDEV bsize=XXX blocks=XXX
+realtime =RDEV extsz=XXX blocks=XXX, rtextents=XXX
+
+*** report initial settings
+[ROOT] 0 0 0 00 [--------] 3 0 0 13 [--------] 0 0 0 00 [--------]
+[NAME] 0 0 0 00 [--------] 0 3 500000 00 [--------] 0 0 0 00 [--------]
+
+*** push past the soft inode limit
+[ROOT] 0 0 0 00 [--------] 3 0 0 13 [--------] 0 0 0 00 [--------]
+[NAME] 0 0 0 00 [--------] 4 3 500000 00 [--------] 0 0 0 00 [--------]
+
+*** push further past the soft inode limit
+[ROOT] 0 0 0 00 [--------] 3 0 0 13 [--------] 0 0 0 00 [--------]
+[NAME] 0 0 0 00 [--------] 8 3 500000 00 [--------] 0 0 0 00 [--------]
+
+*** push past the soft inode warning limit
+[ROOT] 0 0 0 00 [--------] 3 0 0 13 [--------] 0 0 0 00 [--------]
+[NAME] 0 0 0 00 [--------] 18 3 500000 00 [--------] 0 0 0 00 [--------]
+
+*** unmount
diff --git a/tests/xfs/group b/tests/xfs/group
index 87badd56..d7aafc94 100644
--- a/tests/xfs/group
+++ b/tests/xfs/group
@@ -505,3 +505,4 @@
760 auto quick rw collapse punch insert zero prealloc
761 auto quick realtime
763 auto quick rw realtime
+915 auto quick quota
next prev parent reply other threads:[~2021-03-09 4:41 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-03-09 4:40 [PATCHSET 00/10] fstests: test kernel regressions fixed in 5.12 Darrick J. Wong
2021-03-09 4:40 ` [PATCH 01/10] xfs: test regression in xfs_bmap_validate_extent Darrick J. Wong
2021-03-09 4:40 ` [PATCH 02/10] generic: test reflink and copy_file_range behavior with O_SYNC and FS_XFLAG_SYNC files Darrick J. Wong
2021-03-09 4:40 ` [PATCH 03/10] xfs: test rtalloc alignment and math errors Darrick J. Wong
2021-03-11 7:58 ` Chandan Babu R
2021-03-23 4:15 ` Darrick J. Wong
2021-03-25 7:52 ` Chandan Babu R
2021-03-09 4:40 ` [PATCH 04/10] xfs: test mkfs min log size calculation w/ rt volumes Darrick J. Wong
2021-03-11 9:32 ` Chandan Babu R
2021-03-14 14:51 ` Eryu Guan
2021-03-14 16:39 ` Eryu Guan
2021-03-09 4:40 ` [PATCH 05/10] common/filter: refactor quota report filtering Darrick J. Wong
2021-03-11 9:42 ` Chandan Babu R
2021-03-09 4:40 ` Darrick J. Wong [this message]
2021-03-11 11:10 ` [PATCH 06/10] xfs: test quota softlimit warning functionality Chandan Babu R
2021-03-12 4:25 ` Chandan Babu R
2021-03-09 4:40 ` [PATCH 07/10] xfs/122: fix test for xfs_attr_shortform_t conversion Darrick J. Wong
2021-03-11 12:58 ` Christoph Hellwig
2021-03-09 4:40 ` [PATCH 08/10] generic: test file writers racing with FIDEDUPERANGE Darrick J. Wong
2021-03-12 7:13 ` Chandan Babu R
2021-03-09 4:40 ` [PATCH 09/10] generic: test a deadlock in xfs_rename when whiteing out files Darrick J. Wong
2021-03-14 18:06 ` Eryu Guan
2021-03-15 16:54 ` Darrick J. Wong
2021-03-09 4:40 ` [PATCH 10/10] xfs: test delalloc quota leak when chprojid fails Darrick J. Wong
2021-03-12 8:49 ` Chandan Babu R
2021-03-14 18:07 ` [PATCHSET 00/10] fstests: test kernel regressions fixed in 5.12 Eryu Guan
2021-03-14 21:36 ` Darrick J. Wong
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=161526483668.1214319.17667836667890283825.stgit@magnolia \
--to=djwong@kernel.org \
--cc=fstests@vger.kernel.org \
--cc=guan@eryu.me \
--cc=guaneryu@gmail.com \
--cc=linux-xfs@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).