From: "Darrick J. Wong" <djwong@kernel.org>
To: guaneryu@gmail.com, linux-xfs@vger.kernel.org,
fstests@vger.kernel.org, guan@eryu.me
Subject: Re: [PATCH 2/3] generic: test shutdowns of a nested filesystem
Date: Thu, 12 Aug 2021 10:07:46 -0700 [thread overview]
Message-ID: <20210812170746.GQ3601443@magnolia> (raw)
In-Reply-To: <20210812054421.gpeaoccgz26riwxz@fedora>
On Thu, Aug 12, 2021 at 01:44:21PM +0800, Zorro Lang wrote:
> On Tue, Jul 27, 2021 at 05:10:30PM -0700, Darrick J. Wong wrote:
> > From: Darrick J. Wong <djwong@kernel.org>
> >
> > generic/475, but we're running fsstress on a disk image inside the
> > scratch filesystem
> >
> > Signed-off-by: Darrick J. Wong <djwong@kernel.org>
> > ---
> > tests/generic/725 | 136 +++++++++++++++++++++++++++++++++++++++++++++++++
> > tests/generic/725.out | 2 +
> > 2 files changed, 138 insertions(+)
> > create mode 100755 tests/generic/725
> > create mode 100644 tests/generic/725.out
> >
> >
> > diff --git a/tests/generic/725 b/tests/generic/725
> > new file mode 100755
> > index 00000000..f43bcb37
> > --- /dev/null
> > +++ b/tests/generic/725
> > @@ -0,0 +1,136 @@
> > +#! /bin/bash
> > +# SPDX-License-Identifier: GPL-2.0
> > +# Copyright (c) 2021 Oracle, Inc. All Rights Reserved.
> > +#
> > +# FS QA Test No. 725
> > +#
> > +# Test nested log recovery with repeated (simulated) disk failures. We kick
> > +# off fsstress on a loopback filesystem mounted on the scratch fs, then switch
> > +# out the underlying scratch device with dm-error to see what happens when the
> > +# disk goes down. Having taken down both fses in this manner, remount them and
> > +# repeat. This test simulates VM hosts crashing to try to shake out CoW bugs
> > +# in writeback on the host that cause VM guests to fail to recover.
> > +#
> > +. ./common/preamble
> > +_begin_fstest shutdown auto log metadata eio
> > +
> > +_cleanup()
> > +{
> > + cd /
> > + $KILLALL_PROG -9 fsstress > /dev/null 2>&1
> > + wait
> > + if [ -n "$loopmnt" ]; then
> > + umount $loopmnt 2>/dev/null
> > + rm -r -f $loopmnt
> > + fi
> > + rm -f $tmp.*
> > + _dmerror_unmount
> > + _dmerror_cleanup
> > +}
> > +
> > +# Import common functions.
> > +. ./common/dmerror
> > +. ./common/reflink
> > +
> > +# Modify as appropriate.
> > +_supported_fs generic
> > +
> > +_require_scratch_reflink
> > +_require_cp_reflink
> > +_require_dm_target error
> > +_require_command "$KILLALL_PROG" "killall"
> > +
> > +echo "Silence is golden."
> > +
> > +_scratch_mkfs >> $seqres.full 2>&1
> > +_require_metadata_journaling $SCRATCH_DEV
> > +_dmerror_init
> > +_dmerror_mount
> > +
> > +# Create a fs image consuming 1/3 of the scratch fs
> > +scratch_freesp_bytes=$(stat -f -c '%a * %S' $SCRATCH_MNT | bc)
> > +loopimg_bytes=$((scratch_freesp_bytes / 3))
> > +
> > +loopimg=$SCRATCH_MNT/testfs
> > +truncate -s $loopimg_bytes $loopimg
> > +_mkfs_dev $loopimg
>
> I must say this's a nice test as generic/475, I'd like to have it ASAP :)
> Just one question: if the FSTYP is nfs, cifs or virtiofs and so on ... [see below]
>
> > +
> > +loopmnt=$tmp.mount
> > +mkdir -p $loopmnt
> > +
> > +scratch_aliveflag=$tmp.runsnap
> > +snap_aliveflag=$tmp.snapping
> > +
> > +snap_loop_fs() {
> > + touch "$snap_aliveflag"
> > + while [ -e "$scratch_aliveflag" ]; do
> > + rm -f $loopimg.a
> > + _cp_reflink $loopimg $loopimg.a
> > + sleep 1
> > + done
> > + rm -f "$snap_aliveflag"
> > +}
> > +
> > +fsstress=($FSSTRESS_PROG $FSSTRESS_AVOID -d "$loopmnt" -n 999999 -p "$((LOAD_FACTOR * 4))")
> > +
> > +for i in $(seq 1 $((25 * TIME_FACTOR)) ); do
> > + touch $scratch_aliveflag
> > + snap_loop_fs >> $seqres.full 2>&1 &
> > +
> > + if ! _mount $loopimg $loopmnt -o loop; then
>
> ... This test will fail directly at here
It won't, because this test doesn't run if SCRATCH_DEV isn't a block
device. _require_dm_target calls _require_block_device, which should
prevent that, right?
--D
>
> Thanks,
> Zorro
>
> > + rm -f $scratch_aliveflag
> > + _fail "loop mount failed"
> > + break
> > + fi
> > +
> > + ("${fsstress[@]}" >> $seqres.full &) > /dev/null 2>&1
> > +
> > + # purposely include 0 second sleeps to test shutdown immediately after
> > + # recovery
> > + sleep $((RANDOM % (3 * TIME_FACTOR) ))
> > + rm -f $scratch_aliveflag
> > +
> > + # This test aims to simulate sudden disk failure, which means that we
> > + # do not want to quiesce the filesystem or otherwise give it a chance
> > + # to flush its logs. Therefore we want to call dmsetup with the
> > + # --nolockfs parameter; to make this happen we must call the load
> > + # error table helper *without* 'lockfs'.
> > + _dmerror_load_error_table
> > +
> > + ps -e | grep fsstress > /dev/null 2>&1
> > + while [ $? -eq 0 ]; do
> > + $KILLALL_PROG -9 fsstress > /dev/null 2>&1
> > + wait > /dev/null 2>&1
> > + ps -e | grep fsstress > /dev/null 2>&1
> > + done
> > + for ((i = 0; i < 10; i++)); do
> > + test -e "$snap_aliveflag" || break
> > + sleep 1
> > + done
> > +
> > + # Mount again to replay log after loading working table, so we have a
> > + # consistent XFS after test.
> > + $UMOUNT_PROG $loopmnt
> > + _dmerror_unmount || _fail "unmount failed"
> > + _dmerror_load_working_table
> > + if ! _dmerror_mount; then
> > + dmsetup table | tee -a /dev/ttyprintk
> > + lsblk | tee -a /dev/ttyprintk
> > + $XFS_METADUMP_PROG -a -g -o $DMERROR_DEV $seqres.dmfail.md
> > + _fail "mount failed"
> > + fi
> > +done
> > +
> > +# Make sure the fs image file is ok
> > +if [ -f "$loopimg" ]; then
> > + if _mount $loopimg $loopmnt -o loop; then
> > + $UMOUNT_PROG $loopmnt &> /dev/null
> > + else
> > + echo "final loop mount failed"
> > + fi
> > + _check_xfs_filesystem $loopimg none none
> > +fi
> > +
> > +# success, all done
> > +status=0
> > +exit
> > diff --git a/tests/generic/725.out b/tests/generic/725.out
> > new file mode 100644
> > index 00000000..ed73a9fc
> > --- /dev/null
> > +++ b/tests/generic/725.out
> > @@ -0,0 +1,2 @@
> > +QA output created by 725
> > +Silence is golden.
> >
>
next prev parent reply other threads:[~2021-08-12 17:07 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-07-28 0:10 [PATCHSET 0/3] fstests: exercise code refactored in 5.14 Darrick J. Wong
2021-07-28 0:10 ` [PATCH 1/3] generic: test xattr operations only Darrick J. Wong
2021-08-12 5:34 ` Zorro Lang
2021-08-12 17:04 ` Darrick J. Wong
2021-08-15 15:46 ` Eryu Guan
2021-07-28 0:10 ` [PATCH 2/3] generic: test shutdowns of a nested filesystem Darrick J. Wong
2021-08-12 5:44 ` Zorro Lang
2021-08-12 17:07 ` Darrick J. Wong [this message]
2021-08-13 14:52 ` Zorro Lang
2021-08-15 16:28 ` Eryu Guan
2021-08-16 16:35 ` Darrick J. Wong
2021-08-17 3:16 ` Eryu Guan
2021-08-17 4:16 ` Darrick J. Wong
2021-08-17 15:54 ` Darrick J. Wong
2021-07-28 0:10 ` [PATCH 3/3] xfs: test regression in shrink when the new EOFS splits a sparse inode cluster Darrick J. Wong
2021-08-12 6:01 ` Zorro Lang
2021-09-01 0:11 [PATCHSET v2 0/3] fstests: exercise code refactored in 5.14 Darrick J. Wong
2021-09-01 0:11 ` [PATCH 2/3] generic: test shutdowns of a nested filesystem Darrick J. Wong
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210812170746.GQ3601443@magnolia \
--to=djwong@kernel.org \
--cc=fstests@vger.kernel.org \
--cc=guan@eryu.me \
--cc=guaneryu@gmail.com \
--cc=linux-xfs@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).