From: "Yngve N. Pettersen" <yngve@vivaldi.com>
To: git@vger.kernel.org
Subject: Re: Git error message "Server does not allow request for unadvertised object"
Date: Wed, 01 Sep 2021 12:04:56 +0000 [thread overview]
Message-ID: <1630496467881.2030439049.4247253551@vivaldi.com> (raw)
In-Reply-To: <op.0qiwhxykpvqxoc@rowan.vivaldi>
Hello again,
AFAICT I have not seen any updates about this problem since my previous
email a year ago.
From my side, I've just noticed a separate aspect of this issue.
I have noticed a lot of failures related to a specific commit that was a
unadvertised, and on one of the machines throwing this error, Git did
report the repos and paths involved in triggering the error.
In this case, the commit DO exists in the repo specified by gitmodules on
the branch where the submodule commit is referenced. However, it does NOT
exist in the repo referenced by the currently checked out branch!
In more detail, for a currently checked out branch "foo", a submodule with
URL "repo1.git" is specified for path "submodule/mysub" and commit
"f0012345".
On branch "bar" of this top repo, the "submodule/mysub" is specified with
the URL "repo2.git", which is a fork of "repo1.git", and is specifying
commit "ba598765", which does not exist in "repo1.git"
When a fetch is done in the checkout of the "foo" branch, the new branch
"bar" is fetched, and Git sees the submodule commit "ba598765" specified
for "submodule/mysub", and decides to fetch it. However, it tries to fetch
it from "repo1.git", NOT "repo2.git", which is what is specified for that
path on the "bar" branch.
The result is a fatal error for the fetch, causing the automatic build job
to fail, even if the "ba598765" commit is not necessary for the current
build job's checkout.
I've also added a server-side git hook to validate the primary submodule's
commit references, where most errors are likely to occur, but that is not
able to prevent the kind of fetch failures described above, since the
reference IS correct on the branch for which it is committed.
As mentioned earlier, IMO this should not be a fatal error when fetching,
at most it should be a warning. Additionally, as illustrated by the above
example, when performing fetches for submodules the fetch operation should
use the URL specified on the branch, not the one specified in the local
checkout.
On Sunday, 6 September, 2020 14:47:47 (+02:00), Yngve N. Pettersen wrote:
> Hello again,
>
> I wondered what is happening about this issue?
>
> This continues to cause problems, especially now that Mac is using Git
2.21 (without AFAICT any way to revert to 2.17).
>
> The most recent case was last night, after a Work In Progress branch
(that is, it was not used by any production code) in a submodule was
pushed, but updates for at least one of the submodules wasn't pushed. Three
different Mac autobuild jobs broke because of this error and had to be
restarted.
>
>
> On Mon, 18 May 2020 11:20:57 +0200, Yngve N. Pettersen
<yngve@vivaldi.com> wrote:
>
> > Hello all,
> >
> > A while back I reported an issue to the Windows Git project
<https://github.com/git-for-windows/git/issues/2218> that I observed in Git
for Windows 2.21.
> >
> > The error message "Server does not allow request for unadvertised
object" is reported when a commit updating a submodule pointer points to a
commit that does not exist in the repository for that submodule, even if
later commits in the branch points to a commit that do exist in the
submodule repo.
> >
> > This circumstance can easily occur if a developer (e.g)
> >
> > * interactively rebases a branch "foo" in the submodule (e.g to
integrate commits from another branch before a larger rebase)
> > * commits the resulting submodule pointer "A" in the branch to the
parent repo
> > * then do further rebasing in the submodule, e.g to move up on top of
the "bar" branch
> > * commits that pointer "B" to the parent repo
> > * forgets to squash the history in the parent repo
> > * pushes the updated submodule "foo" branch to the online repo. (NOTE:
"B" is pushed, not "A")
> > * pushes the parent module branch to its online repo
> >
> > When the parent repo is pulled by another developer, or an autobuild
system, the fetch operation fails with the message "Server does not allow
request for unadvertised object". A second fetch will complete
successfully.
> >
> > IMO this kind of check should only happen if a commit with pointer to
a missing submodule is actively checked out. At most the above message
should be a warning, not a fatal error.
> >
> > For manual fetch operations this is mostly a nuisance, but for
autobuilders this breaks the update operation, and the entire build
operation fails. That is unacceptable behavior in an automatic system
(errors if it breaks the checkout, yes; issues that are not relevant to the
actual checkout, no).
> >
> > This issue prevents upgrading past 2.17 (since 2.18 and 2.19 had other
blocking issues, and 2.20 apparently introduced this issue). I have not
tested 2.22+ since I have not noticed any changelog messages that seem
related.
> >
> > A test case can be found in issue 2218, linked above.
> >
> > For reference, we do have a server-side git hook that verifies that
submodule pointers for the production branch is correct and exists in the
submodule's repo, and also is on branches that follows certain naming
conventions.
> >
> >
> > As an aside, I think this kind of error message would be have been
better suited as either a client-side push check, to prevent pushes of
references to such missing commits (Smartgit seems to have something like
it, but I think it only checks for the current branch in the submodule, not
all submodule reference commits). Alternatively, there could be a check of
this server-side.
> >
> >
> > Related to this, but not as problematic, just irritating, and also
seen in 2.17, is a message "warning: Submodule in commit deadbee at path:
'(NULL)' collides with a submodule named the same. Skipping it." I think it
is related to recreating a git modules file on a different branch.
> >
>
>
--
Sincerely,
Yngve N. Pettersen
Vivaldi Technologies AS
prev parent reply other threads:[~2021-09-01 12:13 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-05-18 9:20 Git error message "Server does not allow request for unadvertised object" Yngve N. Pettersen
2020-05-25 12:27 ` Philippe Blain
2020-09-06 12:47 ` Yngve N. Pettersen
2021-09-01 12:04 ` Yngve N. Pettersen [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1630496467881.2030439049.4247253551@vivaldi.com \
--to=yngve@vivaldi.com \
--cc=git@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).