From: Han Xin <chiyutianyi@gmail.com>
To: Junio C Hamano <gitster@pobox.com>,
Git List <git@vger.kernel.org>, Jeff King <peff@peff.net>,
Jiang Xin <zhiyou.jx@alibaba-inc.com>,
Philip Oakley <philipoakley@iee.email>
Cc: Han Xin <hanxin.hx@alibaba-inc.com>
Subject: [PATCH v3 5/5] unpack-objects: unpack_non_delta_entry() read data in a stream
Date: Mon, 22 Nov 2021 11:32:20 +0800 [thread overview]
Message-ID: <20211122033220.32883-6-chiyutianyi@gmail.com> (raw)
In-Reply-To: <20211009082058.41138-1-chiyutianyi@gmail.com>
From: Han Xin <hanxin.hx@alibaba-inc.com>
We used to call "get_data()" in "unpack_non_delta_entry()" to read the
entire contents of a blob object, no matter how big it is. This
implementation may consume all the memory and cause OOM.
By implementing a zstream version of input_stream interface, we can use
a small fixed buffer for "unpack_non_delta_entry()".
However, unpack non-delta objects from a stream instead of from an entrie
buffer will have 10% performance penalty. Therefore, only unpack object
larger than the "big_file_threshold" in zstream. See the following
benchmarks:
$ hyperfine \
--prepare 'rm -rf dest.git && git init --bare dest.git' \
'git -C dest.git unpack-objects <binary_320M.pack'
Benchmark 1: git -C dest.git unpack-objects <binary_320M.pack
Time (mean ± σ): 10.029 s ± 0.270 s [User: 8.265 s, System: 1.522 s]
Range (min … max): 9.786 s … 10.603 s 10 runs
$ hyperfine \
--prepare 'rm -rf dest.git && git init --bare dest.git' \
'git -c core.bigFileThreshold=2m -C dest.git unpack-objects <binary_320M.pack'
Benchmark 1: git -c core.bigFileThreshold=2m -C dest.git unpack-objects <binary_320M.pack
Time (mean ± σ): 10.859 s ± 0.774 s [User: 8.813 s, System: 1.898 s]
Range (min … max): 9.884 s … 12.192 s 10 runs
$ hyperfine \
--prepare 'rm -rf dest.git && git init --bare dest.git' \
'git -C dest.git unpack-objects <binary_96M.pack'
Benchmark 1: git -C dest.git unpack-objects <binary_96M.pack
Time (mean ± σ): 2.678 s ± 0.037 s [User: 2.205 s, System: 0.450 s]
Range (min … max): 2.639 s … 2.743 s 10 runs
$ hyperfine \
--prepare 'rm -rf dest.git && git init --bare dest.git' \
'git -c core.bigFileThreshold=2m -C dest.git unpack-objects <binary_96M.pack'
Benchmark 1: git -c core.bigFileThreshold=2m -C dest.git unpack-objects <binary_96M.pack
Time (mean ± σ): 2.819 s ± 0.124 s [User: 2.216 s, System: 0.564 s]
Range (min … max): 2.679 s … 3.125 s 10 runs
Helped-by: Jiang Xin <zhiyou.jx@alibaba-inc.com>
Signed-off-by: Han Xin <hanxin.hx@alibaba-inc.com>
---
builtin/unpack-objects.c | 76 ++++++++++++++++++++++++++++-
object-file.c | 6 +--
object-store.h | 4 ++
t/t5590-unpack-non-delta-objects.sh | 76 +++++++++++++++++++++++++++++
4 files changed, 158 insertions(+), 4 deletions(-)
create mode 100755 t/t5590-unpack-non-delta-objects.sh
diff --git a/builtin/unpack-objects.c b/builtin/unpack-objects.c
index 8d68acd662..bfc254a236 100644
--- a/builtin/unpack-objects.c
+++ b/builtin/unpack-objects.c
@@ -326,11 +326,85 @@ static void added_object(unsigned nr, enum object_type type,
}
}
+struct input_zstream_data {
+ git_zstream *zstream;
+ unsigned char buf[4096];
+ int status;
+};
+
+static const void *feed_input_zstream(struct input_stream *in_stream, unsigned long *readlen)
+{
+ struct input_zstream_data *data = in_stream->data;
+ git_zstream *zstream = data->zstream;
+ void *in = fill(1);
+
+ if (!len || data->status == Z_STREAM_END) {
+ *readlen = 0;
+ return NULL;
+ }
+
+ zstream->next_out = data->buf;
+ zstream->avail_out = sizeof(data->buf);
+ zstream->next_in = in;
+ zstream->avail_in = len;
+
+ data->status = git_inflate(zstream, 0);
+ use(len - zstream->avail_in);
+ *readlen = sizeof(data->buf) - zstream->avail_out;
+
+ return data->buf;
+}
+
+static void write_stream_blob(unsigned nr, unsigned long size)
+{
+ char hdr[32];
+ int hdrlen;
+ git_zstream zstream;
+ struct input_zstream_data data;
+ struct input_stream in_stream = {
+ .read = feed_input_zstream,
+ .data = &data,
+ };
+ struct object_id *oid = &obj_list[nr].oid;
+ int ret;
+
+ memset(&zstream, 0, sizeof(zstream));
+ memset(&data, 0, sizeof(data));
+ data.zstream = &zstream;
+ git_inflate_init(&zstream);
+
+ /* Generate the header */
+ hdrlen = xsnprintf(hdr, sizeof(hdr), "%s %"PRIuMAX, type_name(OBJ_BLOB), (uintmax_t)size) + 1;
+
+ if ((ret = write_loose_object(oid, hdr, hdrlen, &in_stream, 0, 0)))
+ die(_("failed to write object in stream %d"), ret);
+
+ if (zstream.total_out != size || data.status != Z_STREAM_END)
+ die(_("inflate returned %d"), data.status);
+ git_inflate_end(&zstream);
+
+ if (strict && !dry_run) {
+ struct blob *blob = lookup_blob(the_repository, oid);
+ if (blob)
+ blob->object.flags |= FLAG_WRITTEN;
+ else
+ die("invalid blob object from stream");
+ }
+ obj_list[nr].obj = NULL;
+}
+
static void unpack_non_delta_entry(enum object_type type, unsigned long size,
unsigned nr)
{
- void *buf = get_data(size, dry_run);
+ void *buf;
+
+ /* Write large blob in stream without allocating full buffer. */
+ if (!dry_run && type == OBJ_BLOB && size > big_file_threshold) {
+ write_stream_blob(nr, size);
+ return;
+ }
+ buf = get_data(size, dry_run);
if (!dry_run && buf)
write_object(nr, type, buf, size);
else
diff --git a/object-file.c b/object-file.c
index 93bcfaca50..bd7631f7ef 100644
--- a/object-file.c
+++ b/object-file.c
@@ -1878,9 +1878,9 @@ static const void *feed_simple_input_stream(struct input_stream *in_stream, unsi
return data->buf;
}
-static int write_loose_object(const struct object_id *oid, char *hdr,
- int hdrlen, struct input_stream *in_stream,
- time_t mtime, unsigned flags)
+int write_loose_object(const struct object_id *oid, char *hdr,
+ int hdrlen, struct input_stream *in_stream,
+ time_t mtime, unsigned flags)
{
int fd, ret;
unsigned char compressed[4096];
diff --git a/object-store.h b/object-store.h
index ccc1fc9c1a..cbd95c47e2 100644
--- a/object-store.h
+++ b/object-store.h
@@ -228,6 +228,10 @@ int hash_object_file(const struct git_hash_algo *algo, const void *buf,
unsigned long len, const char *type,
struct object_id *oid);
+int write_loose_object(const struct object_id *oid, char *hdr,
+ int hdrlen, struct input_stream *in_stream,
+ time_t mtime, unsigned flags);
+
int write_object_file_flags(const void *buf, unsigned long len,
const char *type, struct object_id *oid,
unsigned flags);
diff --git a/t/t5590-unpack-non-delta-objects.sh b/t/t5590-unpack-non-delta-objects.sh
new file mode 100755
index 0000000000..01d950d119
--- /dev/null
+++ b/t/t5590-unpack-non-delta-objects.sh
@@ -0,0 +1,76 @@
+#!/bin/sh
+#
+# Copyright (c) 2021 Han Xin
+#
+
+test_description='Test unpack-objects when receive pack'
+
+GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=main
+export GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME
+
+. ./test-lib.sh
+
+test_expect_success "create commit with big blobs (1.5 MB)" '
+ test-tool genrandom foo 1500000 >big-blob &&
+ test_commit --append foo big-blob &&
+ test-tool genrandom bar 1500000 >big-blob &&
+ test_commit --append bar big-blob &&
+ (
+ cd .git &&
+ find objects/?? -type f | sort
+ ) >expect &&
+ PACK=$(echo main | git pack-objects --progress --revs test)
+'
+
+test_expect_success 'setup GIT_ALLOC_LIMIT to 1MB' '
+ GIT_ALLOC_LIMIT=1m &&
+ export GIT_ALLOC_LIMIT
+'
+
+test_expect_success 'prepare dest repository' '
+ git init --bare dest.git &&
+ git -C dest.git config core.bigFileThreshold 2m &&
+ git -C dest.git config receive.unpacklimit 100
+'
+
+test_expect_success 'fail to unpack-objects: cannot allocate' '
+ test_must_fail git -C dest.git unpack-objects <test-$PACK.pack 2>err &&
+ test_i18ngrep "fatal: attempting to allocate" err &&
+ (
+ cd dest.git &&
+ find objects/?? -type f | sort
+ ) >actual &&
+ ! test_cmp expect actual
+'
+
+test_expect_success 'set a lower bigfile threshold' '
+ git -C dest.git config core.bigFileThreshold 1m
+'
+
+test_expect_success 'unpack big object in stream' '
+ git -C dest.git unpack-objects <test-$PACK.pack &&
+ git -C dest.git fsck &&
+ (
+ cd dest.git &&
+ find objects/?? -type f | sort
+ ) >actual &&
+ test_cmp expect actual
+'
+
+test_expect_success 'setup for unpack-objects dry-run test' '
+ git init --bare unpack-test.git
+'
+
+test_expect_success 'unpack-objects dry-run' '
+ (
+ cd unpack-test.git &&
+ git unpack-objects -n <../test-$PACK.pack
+ ) &&
+ (
+ cd unpack-test.git &&
+ find objects/ -type f
+ ) >actual &&
+ test_must_be_empty actual
+'
+
+test_done
--
2.34.0.6.g676eedc724
next prev parent reply other threads:[~2021-11-22 3:35 UTC|newest]
Thread overview: 211+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-10-09 8:20 [PATCH] unpack-objects: unpack large object in stream Han Xin
2021-10-19 7:37 ` Han Xin
2021-10-20 14:42 ` Philip Oakley
2021-10-21 3:42 ` Han Xin
2021-10-21 22:47 ` Philip Oakley
2021-11-03 1:48 ` Han Xin
2021-11-03 10:07 ` Philip Oakley
2021-11-12 9:40 ` [PATCH v2 1/6] object-file: refactor write_loose_object() to support inputstream Han Xin
2021-11-18 4:59 ` Jiang Xin
2021-11-18 6:45 ` Junio C Hamano
2021-11-12 9:40 ` [PATCH v2 2/6] object-file.c: add dry_run mode for write_loose_object() Han Xin
2021-11-18 5:42 ` Jiang Xin
2021-11-12 9:40 ` [PATCH v2 3/6] object-file.c: handle nil oid in write_loose_object() Han Xin
2021-11-18 5:49 ` Jiang Xin
2021-11-12 9:40 ` [PATCH v2 4/6] object-file.c: read input stream repeatedly " Han Xin
2021-11-18 5:56 ` Jiang Xin
2021-11-12 9:40 ` [PATCH v2 5/6] object-store.h: add write_loose_object() Han Xin
2021-11-12 9:40 ` [PATCH v2 6/6] unpack-objects: unpack large object in stream Han Xin
2021-11-18 7:14 ` Jiang Xin
2021-11-22 3:32 ` [PATCH v3 0/5] unpack large objects " Han Xin
2021-11-29 7:01 ` Han Xin
2021-11-29 19:12 ` Jeff King
2021-11-30 2:57 ` Han Xin
2021-12-03 9:35 ` [PATCH v4 " Han Xin
2021-12-07 16:18 ` Derrick Stolee
2021-12-10 10:34 ` [PATCH v5 0/6] unpack large blobs " Han Xin
2021-12-17 11:26 ` Han Xin
2021-12-21 11:51 ` [PATCH v7 0/5] " Han Xin
2021-12-21 11:51 ` [PATCH v7 1/5] unpack-objects.c: add dry_run mode for get_data() Han Xin
2021-12-21 14:09 ` Ævar Arnfjörð Bjarmason
2021-12-21 14:43 ` René Scharfe
2021-12-21 15:04 ` Ævar Arnfjörð Bjarmason
2021-12-22 11:15 ` Jiang Xin
2021-12-22 11:29 ` Jiang Xin
2021-12-31 3:06 ` Jiang Xin
2021-12-21 11:51 ` [PATCH v7 2/5] object-file API: add a format_object_header() function Han Xin
2021-12-21 14:30 ` René Scharfe
2022-02-01 14:28 ` C99 %z (was: [PATCH v7 2/5] object-file API: add a format_object_header() function) Ævar Arnfjörð Bjarmason
2021-12-31 3:12 ` [PATCH v7 2/5] object-file API: add a format_object_header() function Jiang Xin
2021-12-21 11:51 ` [PATCH v7 3/5] object-file.c: refactor write_loose_object() to reuse in stream version Han Xin
2021-12-21 14:16 ` Ævar Arnfjörð Bjarmason
2021-12-22 12:02 ` Jiang Xin
2021-12-21 11:52 ` [PATCH v7 4/5] object-file.c: add "write_stream_object_file()" to support read in stream Han Xin
2021-12-21 14:20 ` Ævar Arnfjörð Bjarmason
2021-12-21 15:05 ` Ævar Arnfjörð Bjarmason
2021-12-21 11:52 ` [PATCH v7 5/5] unpack-objects: unpack_non_delta_entry() read data in a stream Han Xin
2021-12-21 15:06 ` Ævar Arnfjörð Bjarmason
2021-12-31 3:19 ` Jiang Xin
2022-01-08 8:54 ` [PATCH v8 0/6] unpack large blobs in stream Han Xin
2022-01-20 11:21 ` [PATCH v9 0/5] " Han Xin
2022-02-01 21:24 ` Ævar Arnfjörð Bjarmason
2022-02-02 8:32 ` Han Xin
2022-02-02 10:59 ` Ævar Arnfjörð Bjarmason
2022-02-04 14:07 ` [PATCH v10 0/6] unpack-objects: support streaming large objects to disk Ævar Arnfjörð Bjarmason
2022-02-04 14:07 ` [PATCH v10 1/6] unpack-objects: low memory footprint for get_data() in dry_run mode Ævar Arnfjörð Bjarmason
2022-02-04 14:07 ` [PATCH v10 2/6] object-file.c: do fsync() and close() before post-write die() Ævar Arnfjörð Bjarmason
2022-02-04 14:07 ` [PATCH v10 3/6] object-file.c: refactor write_loose_object() to several steps Ævar Arnfjörð Bjarmason
2022-02-04 14:07 ` [PATCH v10 4/6] object-file.c: add "stream_loose_object()" to handle large object Ævar Arnfjörð Bjarmason
2022-02-04 14:07 ` [PATCH v10 5/6] core doc: modernize core.bigFileThreshold documentation Ævar Arnfjörð Bjarmason
2022-02-04 14:07 ` [PATCH v10 6/6] unpack-objects: use stream_loose_object() to unpack large objects Ævar Arnfjörð Bjarmason
2022-03-19 0:23 ` [PATCH v11 0/8] unpack-objects: support streaming blobs to disk Ævar Arnfjörð Bjarmason
2022-03-19 0:23 ` [PATCH v11 1/8] unpack-objects: low memory footprint for get_data() in dry_run mode Ævar Arnfjörð Bjarmason
2022-03-19 0:23 ` [PATCH v11 2/8] object-file.c: do fsync() and close() before post-write die() Ævar Arnfjörð Bjarmason
2022-03-19 0:23 ` [PATCH v11 3/8] object-file.c: refactor write_loose_object() to several steps Ævar Arnfjörð Bjarmason
2022-03-19 10:11 ` René Scharfe
2022-03-19 0:23 ` [PATCH v11 4/8] object-file.c: factor out deflate part of write_loose_object() Ævar Arnfjörð Bjarmason
2022-03-19 0:23 ` [PATCH v11 5/8] object-file.c: add "stream_loose_object()" to handle large object Ævar Arnfjörð Bjarmason
2022-03-19 0:23 ` [PATCH v11 6/8] core doc: modernize core.bigFileThreshold documentation Ævar Arnfjörð Bjarmason
2022-03-19 0:23 ` [PATCH v11 7/8] unpack-objects: refactor away unpack_non_delta_entry() Ævar Arnfjörð Bjarmason
2022-03-19 0:23 ` [PATCH v11 8/8] unpack-objects: use stream_loose_object() to unpack large objects Ævar Arnfjörð Bjarmason
2022-03-29 13:56 ` [PATCH v12 0/8] unpack-objects: support streaming blobs to disk Ævar Arnfjörð Bjarmason
2022-03-29 13:56 ` [PATCH v12 1/8] unpack-objects: low memory footprint for get_data() in dry_run mode Ævar Arnfjörð Bjarmason
2022-03-29 13:56 ` [PATCH v12 2/8] object-file.c: do fsync() and close() before post-write die() Ævar Arnfjörð Bjarmason
2022-03-29 13:56 ` [PATCH v12 3/8] object-file.c: refactor write_loose_object() to several steps Ævar Arnfjörð Bjarmason
2022-03-30 7:13 ` Han Xin
2022-03-30 17:34 ` Ævar Arnfjörð Bjarmason
2022-03-29 13:56 ` [PATCH v12 4/8] object-file.c: factor out deflate part of write_loose_object() Ævar Arnfjörð Bjarmason
2022-03-29 13:56 ` [PATCH v12 5/8] object-file.c: add "stream_loose_object()" to handle large object Ævar Arnfjörð Bjarmason
2022-03-31 19:54 ` Neeraj Singh
2022-03-29 13:56 ` [PATCH v12 6/8] core doc: modernize core.bigFileThreshold documentation Ævar Arnfjörð Bjarmason
2022-03-29 13:56 ` [PATCH v12 7/8] unpack-objects: refactor away unpack_non_delta_entry() Ævar Arnfjörð Bjarmason
2022-03-30 19:40 ` René Scharfe
2022-03-31 12:42 ` Ævar Arnfjörð Bjarmason
2022-03-31 16:38 ` René Scharfe
2022-03-29 13:56 ` [PATCH v12 8/8] unpack-objects: use stream_loose_object() to unpack large objects Ævar Arnfjörð Bjarmason
2022-06-04 10:10 ` [PATCH v13 0/7] unpack-objects: support streaming blobs to disk Ævar Arnfjörð Bjarmason
2022-06-04 10:10 ` [PATCH v13 1/7] unpack-objects: low memory footprint for get_data() in dry_run mode Ævar Arnfjörð Bjarmason
2022-06-06 18:35 ` Junio C Hamano
2022-06-09 4:10 ` Han Xin
2022-06-09 18:27 ` Junio C Hamano
2022-06-10 1:50 ` Han Xin
2022-06-10 2:05 ` Ævar Arnfjörð Bjarmason
2022-06-10 12:04 ` Han Xin
2022-06-04 10:10 ` [PATCH v13 2/7] object-file.c: do fsync() and close() before post-write die() Ævar Arnfjörð Bjarmason
2022-06-06 18:45 ` Junio C Hamano
2022-06-04 10:10 ` [PATCH v13 3/7] object-file.c: refactor write_loose_object() to several steps Ævar Arnfjörð Bjarmason
2022-06-04 10:10 ` [PATCH v13 4/7] object-file.c: factor out deflate part of write_loose_object() Ævar Arnfjörð Bjarmason
2022-06-04 10:10 ` [PATCH v13 5/7] object-file.c: add "stream_loose_object()" to handle large object Ævar Arnfjörð Bjarmason
2022-06-06 19:44 ` Junio C Hamano
2022-06-06 20:02 ` Junio C Hamano
2022-06-09 6:04 ` Han Xin
2022-06-09 6:14 ` Han Xin
2022-06-07 19:53 ` Neeraj Singh
2022-06-08 15:34 ` Junio C Hamano
2022-06-09 3:05 ` [RFC PATCH] object-file.c: batched disk flushes for stream_loose_object() Han Xin
2022-06-09 7:35 ` Neeraj Singh
2022-06-09 9:30 ` Johannes Schindelin
2022-06-10 12:55 ` Han Xin
2022-06-04 10:10 ` [PATCH v13 6/7] core doc: modernize core.bigFileThreshold documentation Ævar Arnfjörð Bjarmason
2022-06-06 19:50 ` Junio C Hamano
2022-06-04 10:10 ` [PATCH v13 7/7] unpack-objects: use stream_loose_object() to unpack large objects Ævar Arnfjörð Bjarmason
2022-06-10 14:46 ` [PATCH v14 0/7] unpack-objects: support streaming blobs to disk Han Xin
2022-06-10 14:46 ` [PATCH v14 1/7] unpack-objects: low memory footprint for get_data() in dry_run mode Han Xin
2022-06-10 14:46 ` [PATCH v14 2/7] object-file.c: do fsync() and close() before post-write die() Han Xin
2022-06-10 21:10 ` René Scharfe
2022-06-10 21:33 ` Junio C Hamano
2022-06-11 1:50 ` Han Xin
2022-06-10 14:46 ` [PATCH v14 3/7] object-file.c: refactor write_loose_object() to several steps Han Xin
2022-06-10 14:46 ` [PATCH v14 4/7] object-file.c: factor out deflate part of write_loose_object() Han Xin
2022-06-10 14:46 ` [PATCH v14 5/7] object-file.c: add "stream_loose_object()" to handle large object Han Xin
2022-06-10 14:46 ` [PATCH v14 6/7] core doc: modernize core.bigFileThreshold documentation Han Xin
2022-06-10 21:01 ` Junio C Hamano
2022-06-10 14:46 ` [PATCH v14 7/7] unpack-objects: use stream_loose_object() to unpack large objects Han Xin
2022-06-11 2:44 ` [PATCH v15 0/6] unpack-objects: support streaming blobs to disk Han Xin
2022-06-11 2:44 ` [PATCH v15 1/6] unpack-objects: low memory footprint for get_data() in dry_run mode Han Xin
2022-06-11 2:44 ` [PATCH v15 2/6] object-file.c: refactor write_loose_object() to several steps Han Xin
2022-06-11 2:44 ` [PATCH v15 3/6] object-file.c: factor out deflate part of write_loose_object() Han Xin
2022-06-11 2:44 ` [PATCH v15 4/6] object-file.c: add "stream_loose_object()" to handle large object Han Xin
2022-06-11 2:44 ` [PATCH v15 5/6] core doc: modernize core.bigFileThreshold documentation Han Xin
2022-06-11 2:44 ` [PATCH v15 6/6] unpack-objects: use stream_loose_object() to unpack large objects Han Xin
2022-07-01 2:01 ` Junio C Hamano
2022-05-20 3:05 ` [PATCH 0/1] unpack-objects: low memory footprint for get_data() in dry_run mode Han Xin
2022-05-20 3:05 ` [PATCH 1/1] " Han Xin
2022-01-20 11:21 ` [PATCH v9 1/5] " Han Xin
2022-01-20 11:21 ` [PATCH v9 2/5] object-file.c: refactor write_loose_object() to several steps Han Xin
2022-01-20 11:21 ` [PATCH v9 3/5] object-file.c: add "stream_loose_object()" to handle large object Han Xin
2022-01-20 11:21 ` [PATCH v9 4/5] unpack-objects: unpack_non_delta_entry() read data in a stream Han Xin
2022-01-20 11:21 ` [PATCH v9 5/5] object-file API: add a format_object_header() function Han Xin
2022-01-08 8:54 ` [PATCH v8 1/6] unpack-objects: low memory footprint for get_data() in dry_run mode Han Xin
2022-01-08 12:28 ` René Scharfe
2022-01-11 10:41 ` Han Xin
2022-01-08 8:54 ` [PATCH v8 2/6] object-file.c: refactor write_loose_object() to several steps Han Xin
2022-01-08 12:28 ` René Scharfe
2022-01-11 10:33 ` Han Xin
2022-01-08 8:54 ` [PATCH v8 3/6] object-file.c: remove the slash for directory_size() Han Xin
2022-01-08 17:24 ` René Scharfe
2022-01-11 10:14 ` Han Xin
2022-01-08 8:54 ` [PATCH v8 4/6] object-file.c: add "stream_loose_object()" to handle large object Han Xin
2022-01-08 8:54 ` [PATCH v8 5/6] unpack-objects: unpack_non_delta_entry() read data in a stream Han Xin
2022-01-08 8:54 ` [PATCH v8 6/6] object-file API: add a format_object_header() function Han Xin
2021-12-17 11:26 ` [PATCH v6 1/6] object-file.c: release strbuf in write_loose_object() Han Xin
2021-12-17 19:28 ` René Scharfe
2021-12-18 0:09 ` Junio C Hamano
2021-12-17 11:26 ` [PATCH v6 2/6] object-file.c: refactor object header generation into a function Han Xin
2021-12-20 12:10 ` [RFC PATCH] object-file API: add a format_loose_header() function Ævar Arnfjörð Bjarmason
2021-12-20 12:48 ` Philip Oakley
2021-12-20 22:25 ` Junio C Hamano
2021-12-21 1:42 ` Ævar Arnfjörð Bjarmason
2021-12-21 2:11 ` Junio C Hamano
2021-12-21 2:27 ` Ævar Arnfjörð Bjarmason
2021-12-21 11:43 ` Han Xin
2021-12-17 11:26 ` [PATCH v6 3/6] object-file.c: refactor write_loose_object() to reuse in stream version Han Xin
2021-12-17 11:26 ` [PATCH v6 4/6] object-file.c: make "write_object_file_flags()" to support read in stream Han Xin
2021-12-17 22:52 ` René Scharfe
2021-12-17 11:26 ` [PATCH v6 5/6] unpack-objects.c: add dry_run mode for get_data() Han Xin
2021-12-17 21:22 ` René Scharfe
2021-12-17 11:26 ` [PATCH v6 6/6] unpack-objects: unpack_non_delta_entry() read data in a stream Han Xin
2021-12-10 10:34 ` [PATCH v5 1/6] object-file: refactor write_loose_object() to support read from stream Han Xin
2021-12-10 10:34 ` [PATCH v5 2/6] object-file.c: handle undetermined oid in write_loose_object() Han Xin
2021-12-13 7:32 ` Ævar Arnfjörð Bjarmason
2021-12-10 10:34 ` [PATCH v5 3/6] object-file.c: read stream in a loop " Han Xin
2021-12-10 10:34 ` [PATCH v5 4/6] unpack-objects.c: add dry_run mode for get_data() Han Xin
2021-12-10 10:34 ` [PATCH v5 5/6] object-file.c: make "write_object_file_flags()" to support "HASH_STREAM" Han Xin
2021-12-10 10:34 ` [PATCH v5 6/6] unpack-objects: unpack_non_delta_entry() read data in a stream Han Xin
2021-12-13 8:05 ` Ævar Arnfjörð Bjarmason
2021-12-03 9:35 ` [PATCH v4 1/5] object-file: refactor write_loose_object() to read buffer from stream Han Xin
2021-12-03 13:28 ` Ævar Arnfjörð Bjarmason
2021-12-06 2:07 ` Han Xin
2021-12-03 9:35 ` [PATCH v4 2/5] object-file.c: handle undetermined oid in write_loose_object() Han Xin
2021-12-03 13:21 ` Ævar Arnfjörð Bjarmason
2021-12-06 2:51 ` Han Xin
2021-12-03 13:41 ` Ævar Arnfjörð Bjarmason
2021-12-06 3:12 ` Han Xin
2021-12-03 9:35 ` [PATCH v4 3/5] object-file.c: read stream in a loop " Han Xin
2021-12-03 9:35 ` [PATCH v4 4/5] unpack-objects.c: add dry_run mode for get_data() Han Xin
2021-12-03 13:59 ` Ævar Arnfjörð Bjarmason
2021-12-06 3:20 ` Han Xin
2021-12-03 9:35 ` [PATCH v4 5/5] unpack-objects: unpack_non_delta_entry() read data in a stream Han Xin
2021-12-03 13:07 ` Ævar Arnfjörð Bjarmason
2021-12-07 6:42 ` Han Xin
2021-12-03 13:54 ` Ævar Arnfjörð Bjarmason
2021-12-07 6:17 ` Han Xin
2021-12-03 14:05 ` Ævar Arnfjörð Bjarmason
2021-12-07 6:48 ` Han Xin
2021-11-22 3:32 ` [PATCH v3 1/5] object-file: refactor write_loose_object() to read buffer from stream Han Xin
2021-11-23 23:24 ` Junio C Hamano
2021-11-24 9:00 ` Han Xin
2021-11-22 3:32 ` [PATCH v3 2/5] object-file.c: handle undetermined oid in write_loose_object() Han Xin
2021-11-29 15:10 ` Derrick Stolee
2021-11-29 20:44 ` Junio C Hamano
2021-11-29 22:18 ` Derrick Stolee
2021-11-30 3:23 ` Han Xin
2021-11-22 3:32 ` [PATCH v3 3/5] object-file.c: read stream in a loop " Han Xin
2021-11-22 3:32 ` [PATCH v3 4/5] unpack-objects.c: add dry_run mode for get_data() Han Xin
2021-11-22 3:32 ` Han Xin [this message]
2021-11-29 17:37 ` [PATCH v3 5/5] unpack-objects: unpack_non_delta_entry() read data in a stream Derrick Stolee
2021-11-30 13:49 ` Han Xin
2021-11-30 18:38 ` Derrick Stolee
2021-12-01 20:37 ` "git hyperfine" (was: [PATCH v3 5/5] unpack-objects[...]) Ævar Arnfjörð Bjarmason
2021-12-02 7:33 ` [PATCH v3 5/5] unpack-objects: unpack_non_delta_entry() read data in a stream Han Xin
2021-12-02 13:53 ` Derrick Stolee
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211122033220.32883-6-chiyutianyi@gmail.com \
--to=chiyutianyi@gmail.com \
--cc=git@vger.kernel.org \
--cc=gitster@pobox.com \
--cc=hanxin.hx@alibaba-inc.com \
--cc=peff@peff.net \
--cc=philipoakley@iee.email \
--cc=zhiyou.jx@alibaba-inc.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).