From: Ilya Bobyr <ilya.bobyr@gmail.com>
To: Junio C Hamano <gitster@pobox.com>
Cc: git@vger.kernel.org, Eric Sunshine <sunshine@sunshineco.com>,
Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Subject: Re: [PATCH 3/3] test-lib: '--run' to run only specific tests
Date: Wed, 30 Apr 2014 02:40:31 -0700 [thread overview]
Message-ID: <5360C50F.7070505@gmail.com> (raw)
In-Reply-To: <xmqqlhuvzy6r.fsf@gitster.dls.corp.google.com>
On 4/23/2014 11:40 AM, Junio C Hamano wrote:
> Ilya Bobyr <ilya.bobyr@gmail.com> writes:
>
>> @@ -187,10 +192,70 @@ and either can match the "t[0-9]{4}" part to skip the whole
>> test, or t[0-9]{4} followed by ".$number" to say which
>> particular test to skip.
>>
>> -Note that some tests in the existing test suite rely on previous
>> -test item, so you cannot arbitrarily disable one and expect the
>> -remainder of test to check what the test originally was intended
>> -to check.
>> +For an individual test suite --run could be used to specify that
>> +only some tests should be run or that some tests should be
>> +excluded from a run.
>> +
>> +The argument for --run is a list of individual test numbers or
>> +ranges with an optional negation prefix that define what tests in
>> +a test suite to include in the run. A range is two numbers
>> +separated with a dash and matches a range of tests with both ends
>> +been included. You may omit the first or the second number to
>> +mean "from the first test" or "up to the very last test"
>> +respectively.
>> +
>> +Optional prefix of '!' means that the test or a range of tests
>> +should be excluded from the run.
>> +
>> +If --run starts with an unprefixed number or range the initial
>> +set of tests to run is empty. If the first item starts with '!'
>> +all the tests are added to the initial set. After initial set is
>> +determined every test number or range is added or excluded from
>> +the set one by one, from left to right.
>> +
>> +Individual numbers or ranges could be separated either by a space
>> +or a comma.
>> +
>> +For example, common case is to run several setup tests (1, 2, 3)
>> +and then a specific test (21) that relies on that setup:
>> +
>> + $ sh ./t9200-git-cvsexport-commit.sh --run='1 2 3 21'
>> +
>> +or:
>> +
>> + $ sh ./t9200-git-cvsexport-commit.sh --run=1,2,3,21
>> +
>> +or:
>> +
>> + $ sh ./t9200-git-cvsexport-commit.sh --run='-3 21'
> Good and easily understandable examples.
>
>> +To run only tests up to a specific test (21), one could do this:
>> +
>> + $ sh ./t9200-git-cvsexport-commit.sh --run='1-21'
>> +
>> +or this:
>> +
>> + $ sh ./t9200-git-cvsexport-commit.sh --run='-21'
> These may be redundant, given that the reader would have to have
> grokked the earlier "-3 21" already at this point.
The original idea was to show two most common use cases in the examples,
so that one could just copy/paste it.
I guess you are right that the second is a bit redundant now from the
standpoint of a person who is reading all of it.
I have reordered the examples. Single range is simpler, it comes first
and then a more complicated example.
>> +As noted above, the test set is built going though items left to
>> +right, so this:
>> +
>> + $ sh ./t9200-git-cvsexport-commit.sh --run='1-4 !3'
>> +
>> +will run tests 1, 2, and 4.
> I do not quite understand what you mean by "left to right"; is that
> implementation detail necessary for the user of the feature, or is
> it talking about some limitation coming from the implementation?
> e.g. perhaps "!3 1-4" would not work as people would expect "do not
> run 3, but run tests from 1 thru 4 otherwise", and warning against
> having such an expectation that cannot be fulfilled?
I thought that it is something that you may want to understand if you
are going to build something complicated. As I do not have a specific
use case, this is kind of a made up example.
The idea is that what is on the right overwrites what is on the left.
I've added that sentence as an additional clarification, and your example.
>> +You may use negation with ranges. The following will run all
>> +test as a test suite except from 7 upto 11:
>> +
>> + $ sh ./t9200-git-cvsexport-commit.sh --run='!7-11'
> Hmm, that is somewhat counter-intuitive or at least ambiguous. I
> first thought you would be running everything but skipping 7 thru
> 11, but your explanation is that it is equivalent to "-6,8-11" (that
> is, to intersect set "-11" and set "!7").
Your expectation is correct.
A space or a comma is needed in order for "!7" and "-11" to be treated
separately.
I am not sure why did you read the description as "-6,8-11". There is a
typo in the sentence: s/as a/in the/.
I've changed that, but I would not object a better explanation of cause :)
> The above two illustrate the reason rather well why I said it would
> be better to avoid negation because it would complicate the mental
> model the user needs to form when using the feature.
I think that you do not have to use it if you do not need it.
It adds some expressiveness, is rather easy to implement and is already
there :)
I can remove it, of cause, but is it really necessary?
>> +Some tests in a test suite rely on the previous tests performing
>> +certain actions, specifically some tests are designated as
>> +"setup" test, so you cannot _arbitrarily_ disable one test and
>> +expect the rest to function correctly.
> What this text (moved from the top of this hunk) tells the reader
> applies to both the traditional t0123.4 and the new "--run=1-3,5-"
> syntaxes, but the new placement of it make it sound as if it is only
> for skipping with "--run", especially because the text before this
> paragraph and also after this paragraph both apply only to "--run".
True, but there is another paragraph at the beginning of the section
that talks why would you want to use GIT_SKIP_TESTS:
> In some environments, certain tests have no way of succeeding
> due to platform limitation, such as lack of 'unzip' program, or
> filesystem that do not allow arbitrary sequence of non-NUL bytes
> as pathnames.
I was thinking that if you would be working with individual test suits
you would use '--run'.
And this is where you more likely to think about setup tests.
I could move that paragraph just after the GIT_SKIP_TESTS description.
Then it would apply more to both.
I am not sure it is needed. Let me know if you think otherwise.
>> +--run is mostly useful when you want to focus on a specific test
>> +and know what you are doing. Or when you want to run up to a
>> +certain test.
> Likewise for "and know what you are doing" part. I'd suggest
> dropping that phrase from here, and/or make it part of the "you
> cannot randomly omit and expect later ones to work" that covers both
> ways to skip tests.
I've made this part a bit less wage.
Thank you for reviewing it :)
next prev parent reply other threads:[~2014-04-30 9:40 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-04-22 8:19 [RFC/PATCH v3] Better control of the tests run by a test suite Ilya Bobyr
2014-04-22 8:19 ` [PATCH 1/3] test-lib: Document short options in t/README Ilya Bobyr
2014-04-23 18:24 ` Junio C Hamano
2014-04-30 9:38 ` Ilya Bobyr
2014-04-22 8:19 ` [PATCH 2/3] test-lib: tests skipped by GIT_SKIP_TESTS say so Ilya Bobyr
2014-04-22 8:19 ` [PATCH 3/3] test-lib: '--run' to run only specific tests Ilya Bobyr
2014-04-23 18:40 ` Junio C Hamano
2014-04-30 9:40 ` Ilya Bobyr [this message]
2014-04-30 14:17 ` Junio C Hamano
2014-04-23 19:51 ` Eric Sunshine
2014-04-30 9:41 ` Ilya Bobyr
2014-04-30 9:50 ` [RFC/PATCH v4] Better control of the tests run by a test suite Ilya Bobyr
2014-04-30 9:50 ` [PATCH 1/3] test-lib: Document short options in t/README Ilya Bobyr
2014-04-30 9:50 ` [PATCH 2/3] test-lib: tests skipped by GIT_SKIP_TESTS say so Ilya Bobyr
2014-04-30 9:50 ` [PATCH 3/3] test-lib: '--run' to run only specific tests Ilya Bobyr
2014-05-06 20:53 ` Junio C Hamano
2014-05-06 21:02 ` Junio C Hamano
-- strict thread matches above, loose matches on Subject: below --
2014-03-24 8:49 [RFC/PATCH] Better control of the tests run by a test suite Ilya Bobyr
2014-03-24 8:49 ` [PATCH 3/3] test-lib: '--run' to run only specific tests Ilya Bobyr
2014-03-27 10:32 ` [RFC/PATCH v2] Better control of the tests run by a test suite Ilya Bobyr
2014-03-27 10:32 ` [PATCH 3/3] test-lib: '--run' to run only specific tests Ilya Bobyr
2014-03-28 3:36 ` Eric Sunshine
2014-03-28 7:05 ` Ilya Bobyr
2014-03-30 9:41 ` Eric Sunshine
2014-03-31 17:09 ` Junio C Hamano
2014-03-31 19:35 ` David Tran
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5360C50F.7070505@gmail.com \
--to=ilya.bobyr@gmail.com \
--cc=git@vger.kernel.org \
--cc=gitster@pobox.com \
--cc=ramsay@ramsay1.demon.co.uk \
--cc=sunshine@sunshineco.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).