From: Daniel Vetter <daniel.vetter@ffwll.ch>
To: Intel Graphics Development <intel-gfx@lists.freedesktop.org>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Subject: [PATCH 02/43] drm/i915: add crtc->enable/disable vfuncs insted of dpms
Date: Tue, 3 Jul 2012 11:27:54 +0200 [thread overview]
Message-ID: <1341307715-3886-3-git-send-email-daniel.vetter@ffwll.ch> (raw)
In-Reply-To: <1341307715-3886-1-git-send-email-daniel.vetter@ffwll.ch>
Because that's what we're essentially calling. This is the first step
in untangling the crtc_helper induced dpms handling mess we have - at
the crtc level we only have 2 states and the magic is just in selectin
which one (and atm there isn't even much magic, but on recent
platforms where not even the crt output has more than 2 states we
could do better).
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
---
drivers/gpu/drm/i915/i915_drv.h | 3 +-
drivers/gpu/drm/i915/intel_display.c | 62 ++++++++++------------------------
2 files changed, 20 insertions(+), 45 deletions(-)
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index aa24fc1..111d1e5 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -238,7 +238,6 @@ struct drm_i915_error_state {
};
struct drm_i915_display_funcs {
- void (*dpms)(struct drm_crtc *crtc, int mode);
bool (*fbc_enabled)(struct drm_device *dev);
void (*enable_fbc)(struct drm_crtc *crtc, unsigned long interval);
void (*disable_fbc)(struct drm_device *dev);
@@ -255,6 +254,8 @@ struct drm_i915_display_funcs {
struct drm_display_mode *adjusted_mode,
int x, int y,
struct drm_framebuffer *old_fb);
+ void (*crtc_enable)(struct drm_crtc *crtc);
+ void (*crtc_disable)(struct drm_crtc *crtc);
void (*off)(struct drm_crtc *crtc);
void (*write_eld)(struct drm_connector *connector,
struct drm_crtc *crtc);
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 72b73f8..072f94d 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -3299,30 +3299,6 @@ static void ironlake_crtc_disable(struct drm_crtc *crtc)
mutex_unlock(&dev->struct_mutex);
}
-static void ironlake_crtc_dpms(struct drm_crtc *crtc, int mode)
-{
- struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
- int pipe = intel_crtc->pipe;
- int plane = intel_crtc->plane;
-
- /* XXX: When our outputs are all unaware of DPMS modes other than off
- * and on, we should map those modes to DRM_MODE_DPMS_OFF in the CRTC.
- */
- switch (mode) {
- case DRM_MODE_DPMS_ON:
- case DRM_MODE_DPMS_STANDBY:
- case DRM_MODE_DPMS_SUSPEND:
- DRM_DEBUG_KMS("crtc %d/%d dpms on\n", pipe, plane);
- ironlake_crtc_enable(crtc);
- break;
-
- case DRM_MODE_DPMS_OFF:
- DRM_DEBUG_KMS("crtc %d/%d dpms off\n", pipe, plane);
- ironlake_crtc_disable(crtc);
- break;
- }
-}
-
static void ironlake_crtc_off(struct drm_crtc *crtc)
{
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
@@ -3402,23 +3378,6 @@ static void i9xx_crtc_disable(struct drm_crtc *crtc)
intel_update_watermarks(dev);
}
-static void i9xx_crtc_dpms(struct drm_crtc *crtc, int mode)
-{
- /* XXX: When our outputs are all unaware of DPMS modes other than off
- * and on, we should map those modes to DRM_MODE_DPMS_OFF in the CRTC.
- */
- switch (mode) {
- case DRM_MODE_DPMS_ON:
- case DRM_MODE_DPMS_STANDBY:
- case DRM_MODE_DPMS_SUSPEND:
- i9xx_crtc_enable(crtc);
- break;
- case DRM_MODE_DPMS_OFF:
- i9xx_crtc_disable(crtc);
- break;
- }
-}
-
static void i9xx_crtc_off(struct drm_crtc *crtc)
{
}
@@ -3440,7 +3399,20 @@ static void intel_crtc_dpms(struct drm_crtc *crtc, int mode)
intel_crtc->dpms_mode = mode;
- dev_priv->display.dpms(crtc, mode);
+ /* XXX: When our outputs are all unaware of DPMS modes other than off
+ * and on, we should map those modes to DRM_MODE_DPMS_OFF in the CRTC.
+ */
+ switch (mode) {
+ case DRM_MODE_DPMS_ON:
+ case DRM_MODE_DPMS_STANDBY:
+ case DRM_MODE_DPMS_SUSPEND:
+ dev_priv->display.crtc_enable(crtc);
+ break;
+
+ case DRM_MODE_DPMS_OFF:
+ dev_priv->display.crtc_disable(crtc);
+ break;
+ }
if (!dev->primary->master)
return;
@@ -6940,13 +6912,15 @@ static void intel_init_display(struct drm_device *dev)
/* We always want a DPMS function */
if (HAS_PCH_SPLIT(dev)) {
- dev_priv->display.dpms = ironlake_crtc_dpms;
dev_priv->display.crtc_mode_set = ironlake_crtc_mode_set;
+ dev_priv->display.crtc_enable = ironlake_crtc_enable;
+ dev_priv->display.crtc_disable = ironlake_crtc_disable;
dev_priv->display.off = ironlake_crtc_off;
dev_priv->display.update_plane = ironlake_update_plane;
} else {
- dev_priv->display.dpms = i9xx_crtc_dpms;
dev_priv->display.crtc_mode_set = i9xx_crtc_mode_set;
+ dev_priv->display.crtc_enable = i9xx_crtc_enable;
+ dev_priv->display.crtc_disable = i9xx_crtc_disable;
dev_priv->display.off = i9xx_crtc_off;
dev_priv->display.update_plane = i9xx_update_plane;
}
--
1.7.7.6
next prev parent reply other threads:[~2012-07-03 10:34 UTC|newest]
Thread overview: 49+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-07-03 9:27 [PATCH 00/43] [RFC] modeset rework, part 1 Daniel Vetter
2012-07-03 9:27 ` [PATCH 01/43] drm/i915: introduce for_each_encoder_on_crtc Daniel Vetter
2012-07-04 21:29 ` Paulo Zanoni
2012-07-05 7:50 ` [PATCH] " Daniel Vetter
2012-07-05 13:08 ` Daniel Vetter
2012-07-03 9:27 ` Daniel Vetter [this message]
2012-07-03 9:27 ` [PATCH 03/43] drm/i915: rip out crtc prepare/commit indirection Daniel Vetter
2012-07-03 9:27 ` [PATCH 04/43] drm/i915: add direct encoder disable/enable infrastructure Daniel Vetter
2012-07-03 9:27 ` [PATCH 05/43] drm/i915: add missing gen2 pipe A quirk entries Daniel Vetter
2012-07-03 9:27 ` [PATCH 06/43] drm/i915: rip out the overlay pipe A workaround Daniel Vetter
2012-07-03 9:27 ` [PATCH 07/43] drm/i915: prepare load-detect pipe code for dpms changes Daniel Vetter
2012-07-03 9:28 ` [PATCH 08/43] drm/i915/hdmi: convert to encoder->disable/enable Daniel Vetter
2012-07-26 17:12 ` Paulo Zanoni
2012-07-03 9:28 ` [PATCH 09/43] drm/i915/tv: convert to encoder enable/disable Daniel Vetter
2012-07-03 9:28 ` [PATCH 10/43] drm/i915/lvds: ditch ->prepare special case Daniel Vetter
2012-07-03 9:28 ` [PATCH 11/43] drm/i915/lvds: convert to encoder disable/enable Daniel Vetter
2012-07-03 9:28 ` [PATCH 12/43] drm/i915/dp: " Daniel Vetter
2012-07-03 9:28 ` [PATCH 13/43] drm/i915: create VLV_DSIPLAY_BASE #define Daniel Vetter
2012-07-03 9:28 ` [PATCH 14/43] drm/i915: group ADPA #defines together Daniel Vetter
2012-07-03 9:28 ` [PATCH 15/43] drm/i915: add inte_crt->adpa_reg Daniel Vetter
2012-07-03 9:28 ` [PATCH 16/43] drm/i915/crt: convert to encoder disable/enable Daniel Vetter
2012-07-03 9:28 ` [PATCH 17/43] drm/i915/sdvo: convert to encoder disabl/enable Daniel Vetter
2012-07-03 9:28 ` [PATCH 18/43] drm/i915: simplify dvo dpms interface Daniel Vetter
2012-07-03 9:28 ` [PATCH 19/43] drm/i915: simplify possible_clones computation Daniel Vetter
2012-07-03 9:28 ` [PATCH 20/43] drm/i915: add port parameter to intel_hdmi_init Daniel Vetter
2012-07-03 9:28 ` [PATCH 21/43] drm/i915: convert dpms functions of dvo/sdvo/crt Daniel Vetter
2012-07-03 9:28 ` [PATCH 22/43] drm/i915: rip out encoder->disable/enable checks Daniel Vetter
2012-07-03 9:28 ` [PATCH 23/43] drm/i915: clean up encoder_prepare/commit Daniel Vetter
2012-07-03 9:28 ` [PATCH 24/43] drm/fb helper: don't call drm_crtc_helper_set_config Daniel Vetter
2012-07-03 9:28 ` [PATCH 25/43] drm: remove the list_head from drm_mode_set Daniel Vetter
2012-07-03 9:28 ` [PATCH 26/43] drm/i915: copy&paste drm_crtc_helper_set_config Daniel Vetter
2012-07-03 9:28 ` [PATCH 27/43] drm/i915: call set_base directly Daniel Vetter
2012-07-03 9:28 ` [PATCH 28/43] drm/i915: inline intel_best_encoder Daniel Vetter
2012-07-03 9:28 ` [PATCH 29/43] drm/i915: copy&paste drm_crtc_helper_set_mode Daniel Vetter
2012-07-25 21:14 ` Paulo Zanoni
2012-07-03 9:28 ` [PATCH 30/43] drm/i915: simplify intel_crtc_prepare_encoders Daniel Vetter
2012-07-03 9:28 ` [PATCH 31/43] drm/i915: rip out encoder->prepare/commit Daniel Vetter
2012-07-03 9:28 ` [PATCH 32/43] drm/i915: call crtc functions directly Daniel Vetter
2012-07-03 9:28 ` [PATCH 33/43] drm/i915: WARN when trying to enabled an unused crtc Daniel Vetter
2012-07-03 9:28 ` [PATCH 34/43] drm/i915: Add interfaces to read out encoder/connector hw state Daniel Vetter
2012-07-03 9:28 ` [PATCH 35/43] drm/i915/dp: implement get_hw_state Daniel Vetter
2012-07-03 9:28 ` [PATCH 36/43] drm/i915/hdmi: " Daniel Vetter
2012-07-03 9:28 ` [PATCH 37/43] drm/i915/tv: " Daniel Vetter
2012-07-03 9:28 ` [PATCH 38/43] drm/i915/lvds: " Daniel Vetter
2012-07-03 9:28 ` [PATCH 39/43] drm/i915/crt: " Daniel Vetter
2012-07-03 9:28 ` [PATCH 40/43] drm/i915/sdvo: " Daniel Vetter
2012-07-03 9:28 ` [PATCH 41/43] drm/i915/dvo: " Daniel Vetter
2012-07-03 9:28 ` [PATCH 42/43] drm/i915: read out the modeset hw state at load and resume time Daniel Vetter
2012-07-03 9:28 ` [PATCH 43/43] drm/i915: check connector hw/sw state Daniel Vetter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1341307715-3886-3-git-send-email-daniel.vetter@ffwll.ch \
--to=daniel.vetter@ffwll.ch \
--cc=intel-gfx@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).