intel-gfx.lists.freedesktop.org archive mirror
 help / color / mirror / Atom feed
From: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
To: Matt Roper <matthew.d.roper@intel.com>
Cc: intel-gfx@lists.freedesktop.org
Subject: Re: [Intel-gfx] [PATCH v3 16/22] drm/i915/rkl: Don't try to access transcoder D
Date: Thu, 7 May 2020 10:57:48 +0300	[thread overview]
Message-ID: <20200507075748.GA6112@intel.com> (raw)
In-Reply-To: <20200506211405.816125-1-matthew.d.roper@intel.com>

On Wed, May 06, 2020 at 02:14:05PM -0700, Matt Roper wrote:
> There are a couple places in our driver that loop over transcoders A..D
> for gen11+; since RKL only has three pipes/transcoders, this can lead to
> unclaimed register reads/writes.  We should add checks for transcoder
> existence where appropriate.
> 
> v2: Move one transcoder check that wound up in the wrong function after
>     conflict resolution.  It belongs in bdw_get_trans_port_sync_config
>     rather than bxt_get_dsi_transcoder_state.
> 
> Cc: Aditya Swarup <aditya.swarup@intel.com>
> Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
> ---
>  drivers/gpu/drm/i915/display/intel_ddi.c | 3 +++
>  drivers/gpu/drm/i915/i915_irq.c          | 6 ++++++
>  2 files changed, 9 insertions(+)
> 
> diff --git a/drivers/gpu/drm/i915/display/intel_ddi.c b/drivers/gpu/drm/i915/display/intel_ddi.c
> index 0ab03282c397..f93bc0661d00 100644
> --- a/drivers/gpu/drm/i915/display/intel_ddi.c
> +++ b/drivers/gpu/drm/i915/display/intel_ddi.c
> @@ -4131,6 +4131,9 @@ static void bdw_get_trans_port_sync_config(struct intel_crtc_state *crtc_state)
>  		enum intel_display_power_domain power_domain;
>  		intel_wakeref_t trans_wakeref;
>  
> +		if (!HAS_TRANSCODER(dev_priv, cpu_transcoder))
> +			continue;

for_each_cpu_transcoder_masked() already handles this for us.

Perhaps should just convert the other places to use it as well.

> +
>  		power_domain = POWER_DOMAIN_TRANSCODER(cpu_transcoder);
>  		trans_wakeref = intel_display_power_get_if_enabled(dev_priv,
>  								   power_domain);
> diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
> index 3c3fb9d9df62..297d4cacfb6a 100644
> --- a/drivers/gpu/drm/i915/i915_irq.c
> +++ b/drivers/gpu/drm/i915/i915_irq.c
> @@ -2849,6 +2849,9 @@ static void gen11_display_irq_reset(struct drm_i915_private *dev_priv)
>  		for (trans = TRANSCODER_A; trans <= TRANSCODER_D; trans++) {
>  			enum intel_display_power_domain domain;
>  
> +			if (!HAS_TRANSCODER(dev_priv, trans))
> +				continue;
> +
>  			domain = POWER_DOMAIN_TRANSCODER(trans);
>  			if (!intel_display_power_is_enabled(dev_priv, domain))
>  				continue;
> @@ -3397,6 +3400,9 @@ static void gen8_de_irq_postinstall(struct drm_i915_private *dev_priv)
>  		for (trans = TRANSCODER_A; trans <= TRANSCODER_D; trans++) {
>  			enum intel_display_power_domain domain;
>  
> +			if (!HAS_TRANSCODER(dev_priv, trans))
> +				continue;
> +
>  			domain = POWER_DOMAIN_TRANSCODER(trans);
>  			if (!intel_display_power_is_enabled(dev_priv, domain))
>  				continue;
> -- 
> 2.24.1
> 
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/intel-gfx

-- 
Ville Syrjälä
Intel
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

  reply	other threads:[~2020-05-07  7:57 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <20200504225227.464666-17-matthew.d.roper>
2020-05-06 21:14 ` [Intel-gfx] [PATCH v3 16/22] drm/i915/rkl: Don't try to access transcoder D Matt Roper
2020-05-07  7:57   ` Ville Syrjälä [this message]
2020-05-04 22:52 [Intel-gfx] [PATCH v2 " Matt Roper
2020-05-06 21:21 ` [Intel-gfx] [PATCH v3 " Matt Roper

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200507075748.GA6112@intel.com \
    --to=ville.syrjala@linux.intel.com \
    --cc=intel-gfx@lists.freedesktop.org \
    --cc=matthew.d.roper@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).