kernel-janitors.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Lukas Bulwahn <lukas.bulwahn@gmail.com>
To: Thomas Bogendoerfer <tsbogend@alpha.franken.de>,
	linux-mips@vger.kernel.org
Cc: "Maciej W . Rozycki" <macro@orcam.me.uk>,
	Tiezhu Yang <yangtiezhu@loongson.cn>, Willy Tarreau <w@1wt.eu>,
	linux-edac@vger.kernel.org, linux-hams@vger.kernel.org,
	kernel-janitors@vger.kernel.org, linux-kernel@vger.kernel.org,
	Lukas Bulwahn <lukas.bulwahn@gmail.com>
Subject: [PATCH v2 3/3] arch: mips: remove dead references
Date: Fri, 25 Jun 2021 13:04:19 +0200	[thread overview]
Message-ID: <20210625110419.24503-4-lukas.bulwahn@gmail.com> (raw)
In-Reply-To: <20210625110419.24503-1-lukas.bulwahn@gmail.com>

The domain lookup for linux-mips.org fails for quite some time now.
Further, the two links:

  http://decstation.unix-ag.org/
  http://www.computer-refuge.org/classiccmp/ftp.digital.com/pub/DEC/TriAdd/

refer to old webpages or contain no further technical information.

Remove all those dead references.

Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
---
 arch/mips/Kconfig             |  8 +-------
 arch/mips/jazz/Kconfig        | 12 +++---------
 tools/include/nolibc/nolibc.h |  3 +--
 3 files changed, 5 insertions(+), 18 deletions(-)

diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index cee6087cd686..1bebf7fa2882 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -379,9 +379,7 @@ config MACH_DECSTATION
 	select SYS_SUPPORTS_1024HZ
 	select MIPS_L1_CACHE_SHIFT_4
 	help
-	  This enables support for DEC's MIPS based workstations.  For details
-	  see the Linux/MIPS FAQ on <http://www.linux-mips.org/> and the
-	  DECstation porting pages on <http://decstation.unix-ag.org/>.
+	  This enables support for DEC's MIPS based workstations.
 
 	  If you have one of the following DECstation Models you definitely
 	  want to choose R4xx0 for the CPU Type:
@@ -3246,10 +3244,6 @@ config TC
 	  processors.  TURBOchannel programming specifications are available
 	  at:
 	  <ftp://ftp.hp.com/pub/alphaserver/archive/triadd/>
-	  and:
-	  <http://www.computer-refuge.org/classiccmp/ftp.digital.com/pub/DEC/TriAdd/>
-	  Linux driver support status is documented at:
-	  <http://www.linux-mips.org/wiki/DECstation>
 
 config MMU
 	bool
diff --git a/arch/mips/jazz/Kconfig b/arch/mips/jazz/Kconfig
index 42932ca98db9..162d11670c75 100644
--- a/arch/mips/jazz/Kconfig
+++ b/arch/mips/jazz/Kconfig
@@ -5,9 +5,7 @@ config ACER_PICA_61
 	select DMA_NONCOHERENT
 	help
 	  This is a machine with a R4400 133/150 MHz CPU. To compile a Linux
-	  kernel that runs on these, say Y here. For details about Linux on
-	  the MIPS architecture, check out the Linux/MIPS FAQ on the WWW at
-	  <http://www.linux-mips.org/>.
+	  kernel that runs on these, say Y here.
 
 config MIPS_MAGNUM_4000
 	bool "Support for MIPS Magnum 4000"
@@ -16,9 +14,7 @@ config MIPS_MAGNUM_4000
 	select SYS_SUPPORTS_BIG_ENDIAN
 	help
 	  This is a machine with a R4000 100 MHz CPU. To compile a Linux
-	  kernel that runs on these, say Y here. For details about Linux on
-	  the MIPS architecture, check out the Linux/MIPS FAQ on the WWW at
-	  <http://www.linux-mips.org/>.
+	  kernel that runs on these, say Y here.
 
 config OLIVETTI_M700
 	bool "Support for Olivetti M700-10"
@@ -26,6 +22,4 @@ config OLIVETTI_M700
 	select DMA_NONCOHERENT
 	help
 	  This is a machine with a R4000 100 MHz CPU. To compile a Linux
-	  kernel that runs on these, say Y here. For details about Linux on
-	  the MIPS architecture, check out the Linux/MIPS FAQ on the WWW at
-	  <http://www.linux-mips.org/>.
+	  kernel that runs on these, say Y here.
diff --git a/tools/include/nolibc/nolibc.h b/tools/include/nolibc/nolibc.h
index 8b7a9830dd22..754e64c4a1d1 100644
--- a/tools/include/nolibc/nolibc.h
+++ b/tools/include/nolibc/nolibc.h
@@ -1027,8 +1027,7 @@ struct sys_stat_struct {
  *   - arguments are in a0, a1, a2, a3, then the stack. The caller needs to
  *     leave some room in the stack for the callee to save a0..a3 if needed.
  *   - Many registers are clobbered, in fact only a0..a2 and s0..s8 are
- *     preserved. See: https://www.linux-mips.org/wiki/Syscall as well as
- *     scall32-o32.S in the kernel sources.
+ *     preserved. See: scall32-o32.S in the kernel sources.
  *   - the system call is performed by calling "syscall"
  *   - syscall return comes in v0, and register a3 needs to be checked to know
  *     if an error occured, in which case errno is in v0.
-- 
2.17.1


  parent reply	other threads:[~2021-06-25 11:04 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-06-25 11:04 [PATCH v2 0/3] Remove dead linux-mips.org references Lukas Bulwahn
2021-06-25 11:04 ` [PATCH v2 1/3] MAINTAINERS: mark sections from Ralf Baechle orphan Lukas Bulwahn
2021-07-17  7:03   ` Lukas Bulwahn
2021-07-17  9:13     ` Ralf Baechle
2021-07-17 20:59     ` Joshua Kinard
2021-06-25 11:04 ` [PATCH v2 2/3] MAINTAINERS: remove linux-mips.org references Lukas Bulwahn
2021-06-25 11:04 ` Lukas Bulwahn [this message]
2021-06-26 16:52   ` [PATCH v2 3/3] arch: mips: remove dead references Philippe Mathieu-Daudé
2021-06-26 17:22     ` Maciej W. Rozycki
2021-07-17  6:53       ` Lukas Bulwahn
2021-07-17  6:52     ` Lukas Bulwahn
2021-06-25 15:49 ` [PATCH v2 0/3] Remove dead linux-mips.org references Maciej W. Rozycki
2021-06-26 23:45   ` Joe Perches
2021-06-28  1:28     ` Jiaxun Yang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210625110419.24503-4-lukas.bulwahn@gmail.com \
    --to=lukas.bulwahn@gmail.com \
    --cc=kernel-janitors@vger.kernel.org \
    --cc=linux-edac@vger.kernel.org \
    --cc=linux-hams@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mips@vger.kernel.org \
    --cc=macro@orcam.me.uk \
    --cc=tsbogend@alpha.franken.de \
    --cc=w@1wt.eu \
    --cc=yangtiezhu@loongson.cn \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).