From: Huacai Chen <chenhc@lemote.com>
To: Paolo Bonzini <pbonzini@redhat.com>,
Thomas Bogendoerfer <tsbogend@alpha.franken.de>,
Aleksandar Markovic <aleksandar.qemu.devel@gmail.com>
Cc: kvm@vger.kernel.org, linux-mips@vger.kernel.org,
Fuxin Zhang <zhangfx@lemote.com>,
Huacai Chen <chenhuacai@gmail.com>,
Jiaxun Yang <jiaxun.yang@flygoat.com>,
Huacai Chen <chenhc@lemote.com>
Subject: [PATCH V7 12/15] KVM: MIPS: Add CONFIG6 and DIAG registers emulation
Date: Sat, 23 May 2020 15:56:39 +0800 [thread overview]
Message-ID: <1590220602-3547-13-git-send-email-chenhc@lemote.com> (raw)
In-Reply-To: <1590220602-3547-1-git-send-email-chenhc@lemote.com>
Loongson-3 has CONFIG6 and DIAG registers which need to be emulated.
CONFIG6 is mostly used to enable/disable FTLB and SFB, while DIAG is
mostly used to flush BTB, ITLB, DTLB, VTLB and FTLB.
Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Reviewed-by: Aleksandar Markovic <aleksandar.qemu.devel@gmail.com>
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Co-developed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
---
arch/mips/include/asm/kvm_host.h | 7 +++++
arch/mips/include/asm/mipsregs.h | 7 +++++
arch/mips/kvm/tlb.c | 41 ++++++++++++++++++++++++++
arch/mips/kvm/vz.c | 62 +++++++++++++++++++++++++++++++++++++++-
4 files changed, 116 insertions(+), 1 deletion(-)
diff --git a/arch/mips/include/asm/kvm_host.h b/arch/mips/include/asm/kvm_host.h
index 3fd2f1c..30b5e33 100644
--- a/arch/mips/include/asm/kvm_host.h
+++ b/arch/mips/include/asm/kvm_host.h
@@ -68,9 +68,11 @@
#define KVM_REG_MIPS_CP0_CONFIG3 MIPS_CP0_32(16, 3)
#define KVM_REG_MIPS_CP0_CONFIG4 MIPS_CP0_32(16, 4)
#define KVM_REG_MIPS_CP0_CONFIG5 MIPS_CP0_32(16, 5)
+#define KVM_REG_MIPS_CP0_CONFIG6 MIPS_CP0_32(16, 6)
#define KVM_REG_MIPS_CP0_CONFIG7 MIPS_CP0_32(16, 7)
#define KVM_REG_MIPS_CP0_MAARI MIPS_CP0_64(17, 2)
#define KVM_REG_MIPS_CP0_XCONTEXT MIPS_CP0_64(20, 0)
+#define KVM_REG_MIPS_CP0_DIAG MIPS_CP0_32(22, 0)
#define KVM_REG_MIPS_CP0_ERROREPC MIPS_CP0_64(30, 0)
#define KVM_REG_MIPS_CP0_KSCRATCH1 MIPS_CP0_64(31, 2)
#define KVM_REG_MIPS_CP0_KSCRATCH2 MIPS_CP0_64(31, 3)
@@ -256,6 +258,7 @@ struct mips_coproc {
#define MIPS_CP0_WATCH_LO 18
#define MIPS_CP0_WATCH_HI 19
#define MIPS_CP0_TLB_XCONTEXT 20
+#define MIPS_CP0_DIAG 22
#define MIPS_CP0_ECC 26
#define MIPS_CP0_CACHE_ERR 27
#define MIPS_CP0_TAG_LO 28
@@ -927,6 +930,10 @@ void kvm_vz_save_guesttlb(struct kvm_mips_tlb *buf, unsigned int index,
unsigned int count);
void kvm_vz_load_guesttlb(const struct kvm_mips_tlb *buf, unsigned int index,
unsigned int count);
+#ifdef CONFIG_CPU_LOONGSON64
+void kvm_loongson_clear_guest_vtlb(void);
+void kvm_loongson_clear_guest_ftlb(void);
+#endif
#endif
void kvm_mips_suspend_mm(int cpu);
diff --git a/arch/mips/include/asm/mipsregs.h b/arch/mips/include/asm/mipsregs.h
index 796fe47..ce40fbf 100644
--- a/arch/mips/include/asm/mipsregs.h
+++ b/arch/mips/include/asm/mipsregs.h
@@ -993,6 +996,8 @@
/* Disable Branch Return Cache */
#define R10K_DIAG_D_BRC (_ULCAST_(1) << 22)
+/* Flush BTB */
+#define LOONGSON_DIAG_BTB (_ULCAST_(1) << 1)
/* Flush ITLB */
#define LOONGSON_DIAG_ITLB (_ULCAST_(1) << 2)
/* Flush DTLB */
@@ -2825,7 +2830,9 @@ __BUILD_SET_C0(status)
__BUILD_SET_C0(cause)
__BUILD_SET_C0(config)
__BUILD_SET_C0(config5)
+__BUILD_SET_C0(config6)
__BUILD_SET_C0(config7)
+__BUILD_SET_C0(diag)
__BUILD_SET_C0(intcontrol)
__BUILD_SET_C0(intctl)
__BUILD_SET_C0(srsmap)
diff --git a/arch/mips/kvm/tlb.c b/arch/mips/kvm/tlb.c
index 7cd9216..1418715 100644
--- a/arch/mips/kvm/tlb.c
+++ b/arch/mips/kvm/tlb.c
@@ -20,6 +20,7 @@
#include <asm/cpu.h>
#include <asm/bootinfo.h>
+#include <asm/mipsregs.h>
#include <asm/mmu_context.h>
#include <asm/pgtable.h>
#include <asm/cacheflush.h>
@@ -622,6 +623,46 @@ void kvm_vz_load_guesttlb(const struct kvm_mips_tlb *buf, unsigned int index,
}
EXPORT_SYMBOL_GPL(kvm_vz_load_guesttlb);
+#ifdef CONFIG_CPU_LOONGSON64
+void kvm_loongson_clear_guest_vtlb(void)
+{
+ int idx = read_gc0_index();
+
+ /* Set root GuestID for root probe and write of guest TLB entry */
+ set_root_gid_to_guest_gid();
+
+ write_gc0_index(0);
+ guest_tlbinvf();
+ write_gc0_index(idx);
+
+ clear_root_gid();
+ set_c0_diag(LOONGSON_DIAG_ITLB | LOONGSON_DIAG_DTLB);
+}
+EXPORT_SYMBOL_GPL(kvm_loongson_clear_guest_vtlb);
+
+void kvm_loongson_clear_guest_ftlb(void)
+{
+ int i;
+ int idx = read_gc0_index();
+
+ /* Set root GuestID for root probe and write of guest TLB entry */
+ set_root_gid_to_guest_gid();
+
+ for (i = current_cpu_data.tlbsizevtlb;
+ i < (current_cpu_data.tlbsizevtlb +
+ current_cpu_data.tlbsizeftlbsets);
+ i++) {
+ write_gc0_index(i);
+ guest_tlbinvf();
+ }
+ write_gc0_index(idx);
+
+ clear_root_gid();
+ set_c0_diag(LOONGSON_DIAG_ITLB | LOONGSON_DIAG_DTLB);
+}
+EXPORT_SYMBOL_GPL(kvm_loongson_clear_guest_ftlb);
+#endif
+
#endif
/**
diff --git a/arch/mips/kvm/vz.c b/arch/mips/kvm/vz.c
index 72a62f1..73701c3 100644
--- a/arch/mips/kvm/vz.c
+++ b/arch/mips/kvm/vz.c
@@ -127,6 +127,11 @@ static inline unsigned int kvm_vz_config5_guest_wrmask(struct kvm_vcpu *vcpu)
return mask;
}
+static inline unsigned int kvm_vz_config6_guest_wrmask(struct kvm_vcpu *vcpu)
+{
+ return MIPS_CONF6_LOONGSON_INTIMER | MIPS_CONF6_LOONGSON_EXTIMER;
+}
+
/*
* VZ optionally allows these additional Config bits to be written by root:
* Config: M, [MT]
@@ -181,6 +186,12 @@ static inline unsigned int kvm_vz_config5_user_wrmask(struct kvm_vcpu *vcpu)
return kvm_vz_config5_guest_wrmask(vcpu) | MIPS_CONF5_MRP;
}
+static inline unsigned int kvm_vz_config6_user_wrmask(struct kvm_vcpu *vcpu)
+{
+ return kvm_vz_config6_guest_wrmask(vcpu) |
+ MIPS_CONF6_LOONGSON_SFBEN | MIPS_CONF6_LOONGSON_FTLBDIS;
+}
+
static gpa_t kvm_vz_gva_to_gpa_cb(gva_t gva)
{
/* VZ guest has already converted gva to gpa */
@@ -930,7 +941,8 @@ static enum emulation_result kvm_vz_gpsi_cop0(union mips_instruction inst,
(sel == 2 || /* SRSCtl */
sel == 3)) || /* SRSMap */
(rd == MIPS_CP0_CONFIG &&
- (sel == 7)) || /* Config7 */
+ (sel == 6 || /* Config6 */
+ sel == 7)) || /* Config7 */
(rd == MIPS_CP0_LLADDR &&
(sel == 2) && /* MAARI */
cpu_guest_has_maar &&
@@ -938,6 +950,11 @@ static enum emulation_result kvm_vz_gpsi_cop0(union mips_instruction inst,
(rd == MIPS_CP0_ERRCTL &&
(sel == 0))) { /* ErrCtl */
val = cop0->reg[rd][sel];
+#ifdef CONFIG_CPU_LOONGSON64
+ } else if (rd == MIPS_CP0_DIAG &&
+ (sel == 0)) { /* Diag */
+ val = cop0->reg[rd][sel];
+#endif
} else {
val = 0;
er = EMULATE_FAIL;
@@ -1000,9 +1017,40 @@ static enum emulation_result kvm_vz_gpsi_cop0(union mips_instruction inst,
cpu_guest_has_maar &&
!cpu_guest_has_dyn_maar) {
kvm_write_maari(vcpu, val);
+ } else if (rd == MIPS_CP0_CONFIG &&
+ (sel == 6)) {
+ cop0->reg[rd][sel] = (int)val;
} else if (rd == MIPS_CP0_ERRCTL &&
(sel == 0)) { /* ErrCtl */
/* ignore the written value */
+#ifdef CONFIG_CPU_LOONGSON64
+ } else if (rd == MIPS_CP0_DIAG &&
+ (sel == 0)) { /* Diag */
+ unsigned long flags;
+
+ local_irq_save(flags);
+ if (val & LOONGSON_DIAG_BTB) {
+ /* Flush BTB */
+ set_c0_diag(LOONGSON_DIAG_BTB);
+ }
+ if (val & LOONGSON_DIAG_ITLB) {
+ /* Flush ITLB */
+ set_c0_diag(LOONGSON_DIAG_ITLB);
+ }
+ if (val & LOONGSON_DIAG_DTLB) {
+ /* Flush DTLB */
+ set_c0_diag(LOONGSON_DIAG_DTLB);
+ }
+ if (val & LOONGSON_DIAG_VTLB) {
+ /* Flush VTLB */
+ kvm_loongson_clear_guest_vtlb();
+ }
+ if (val & LOONGSON_DIAG_FTLB) {
+ /* Flush FTLB */
+ kvm_loongson_clear_guest_ftlb();
+ }
+ local_irq_restore(flags);
+#endif
} else {
er = EMULATE_FAIL;
}
@@ -1692,6 +1740,7 @@ static u64 kvm_vz_get_one_regs[] = {
KVM_REG_MIPS_CP0_CONFIG3,
KVM_REG_MIPS_CP0_CONFIG4,
KVM_REG_MIPS_CP0_CONFIG5,
+ KVM_REG_MIPS_CP0_CONFIG6,
#ifdef CONFIG_64BIT
KVM_REG_MIPS_CP0_XCONTEXT,
#endif
@@ -2019,6 +2068,9 @@ static int kvm_vz_get_one_reg(struct kvm_vcpu *vcpu,
return -EINVAL;
*v = read_gc0_config5();
break;
+ case KVM_REG_MIPS_CP0_CONFIG6:
+ *v = kvm_read_sw_gc0_config6(cop0);
+ break;
case KVM_REG_MIPS_CP0_MAAR(0) ... KVM_REG_MIPS_CP0_MAAR(0x3f):
if (!cpu_guest_has_maar || cpu_guest_has_dyn_maar)
return -EINVAL;
@@ -2288,6 +2340,14 @@ static int kvm_vz_set_one_reg(struct kvm_vcpu *vcpu,
write_gc0_config5(v);
}
break;
+ case KVM_REG_MIPS_CP0_CONFIG6:
+ cur = kvm_read_sw_gc0_config6(cop0);
+ change = (cur ^ v) & kvm_vz_config6_user_wrmask(vcpu);
+ if (change) {
+ v = cur ^ change;
+ kvm_write_sw_gc0_config6(cop0, (int)v);
+ }
+ break;
case KVM_REG_MIPS_CP0_MAAR(0) ... KVM_REG_MIPS_CP0_MAAR(0x3f):
if (!cpu_guest_has_maar || cpu_guest_has_dyn_maar)
return -EINVAL;
--
2.7.0
next prev parent reply other threads:[~2020-05-23 8:03 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-05-23 7:56 [PATCH V7 00/15] KVM: MIPS: Add Loongson-3 support (Host Side) Huacai Chen
2020-05-23 7:56 ` [PATCH V7 01/15] KVM: MIPS: Define KVM_ENTRYHI_ASID to cpu_asid_mask(&boot_cpu_data) Huacai Chen
2020-05-23 7:56 ` [PATCH V7 02/15] KVM: MIPS: Fix VPN2_MASK definition for variable cpu_vmbits Huacai Chen
2020-05-23 7:56 ` [PATCH V7 03/15] KVM: MIPS: Increase KVM_MAX_VCPUS and KVM_USER_MEM_SLOTS to 16 Huacai Chen
2020-05-23 7:56 ` [PATCH V7 04/15] KVM: MIPS: Add EVENTFD support which is needed by VHOST Huacai Chen
2020-05-23 7:56 ` [PATCH V7 05/15] KVM: MIPS: Use lddir/ldpte instructions to lookup gpa_mm.pgd Huacai Chen
2020-05-23 7:56 ` [PATCH V7 06/15] KVM: MIPS: Introduce and use cpu_guest_has_ldpte Huacai Chen
2020-05-23 7:56 ` [PATCH V7 07/15] KVM: MIPS: Use root tlb to control guest's CCA for Loongson-3 Huacai Chen
2020-05-23 7:56 ` [PATCH V7 08/15] KVM: MIPS: Let indexed cacheops cause guest exit on Loongson-3 Huacai Chen
2020-05-23 7:56 ` [PATCH V7 09/15] KVM: MIPS: Add more types of virtual interrupts Huacai Chen
2020-05-23 7:56 ` [PATCH V7 10/15] KVM: MIPS: Add Loongson-3 Virtual IPI interrupt support Huacai Chen
2020-05-23 7:56 ` [PATCH V7 11/15] KVM: MIPS: Add CPUCFG emulation for Loongson-3 Huacai Chen
2020-05-23 7:56 ` Huacai Chen [this message]
2020-05-23 13:27 ` [PATCH V7 12/15] KVM: MIPS: Add CONFIG6 and DIAG registers emulation WANG Xuerui
[not found] ` <CAHiYmc6YDw7=mqXfMdgSfeR-HVd2Ec+sQVquM=Z6jLke2s-VEw@mail.gmail.com>
2020-05-24 2:45 ` Huacai Chen
2020-05-23 7:56 ` [PATCH V7 13/15] KVM: MIPS: Add more MMIO load/store instructions emulation Huacai Chen
2020-05-23 7:56 ` [PATCH V7 14/15] KVM: MIPS: Enable KVM support for Loongson-3 Huacai Chen
2020-05-23 7:56 ` [PATCH V7 15/15] MAINTAINERS: Update KVM/MIPS maintainers Huacai Chen
2020-05-23 9:01 ` [PATCH V7 00/15] KVM: MIPS: Add Loongson-3 support (Host Side) Aleksandar Markovic
2020-06-04 17:57 ` Paolo Bonzini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1590220602-3547-13-git-send-email-chenhc@lemote.com \
--to=chenhc@lemote.com \
--cc=aleksandar.qemu.devel@gmail.com \
--cc=chenhuacai@gmail.com \
--cc=jiaxun.yang@flygoat.com \
--cc=kvm@vger.kernel.org \
--cc=linux-mips@vger.kernel.org \
--cc=pbonzini@redhat.com \
--cc=tsbogend@alpha.franken.de \
--cc=zhangfx@lemote.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).