From: Yifei Jiang <jiangyifei@huawei.com>
To: <qemu-devel@nongnu.org>, <qemu-riscv@nongnu.org>
Cc: <kvm-riscv@lists.infradead.org>, <kvm@vger.kernel.org>,
<libvir-list@redhat.com>, <anup.patel@wdc.com>,
<palmer@dabbelt.com>, <Alistair.Francis@wdc.com>,
<sagark@eecs.berkeley.edu>, <kbastian@mail.uni-paderborn.de>,
<bin.meng@windriver.com>, <fanliang@huawei.com>,
<wu.wubin@huawei.com>, <zhang.zhanghailiang@huawei.com>,
<yinyipeng1@huawei.com>, Yifei Jiang <jiangyifei@huawei.com>
Subject: [PATCH RFC v5 06/12] target/riscv: Support start kernel directly by KVM
Date: Mon, 12 Apr 2021 14:52:40 +0800 [thread overview]
Message-ID: <20210412065246.1853-7-jiangyifei@huawei.com> (raw)
In-Reply-To: <20210412065246.1853-1-jiangyifei@huawei.com>
Get kernel and fdt start address in virt.c, and pass them to KVM
when cpu reset. In addition, add kvm_riscv.h to place riscv specific
interface.
Signed-off-by: Yifei Jiang <jiangyifei@huawei.com>
Signed-off-by: Yipeng Yin <yinyipeng1@huawei.com>
---
hw/riscv/boot.c | 11 +++++++++++
hw/riscv/virt.c | 7 +++++++
include/hw/riscv/boot.h | 1 +
target/riscv/cpu.c | 8 ++++++++
target/riscv/cpu.h | 3 +++
target/riscv/kvm-stub.c | 25 +++++++++++++++++++++++++
target/riscv/kvm.c | 13 +++++++++++++
target/riscv/kvm_riscv.h | 24 ++++++++++++++++++++++++
target/riscv/meson.build | 2 +-
9 files changed, 93 insertions(+), 1 deletion(-)
create mode 100644 target/riscv/kvm-stub.c
create mode 100644 target/riscv/kvm_riscv.h
diff --git a/hw/riscv/boot.c b/hw/riscv/boot.c
index 0d38bb7426..b9741a647d 100644
--- a/hw/riscv/boot.c
+++ b/hw/riscv/boot.c
@@ -290,3 +290,14 @@ void riscv_setup_rom_reset_vec(MachineState *machine, RISCVHartArrayState *harts
return;
}
+
+void riscv_setup_direct_kernel(hwaddr kernel_addr, hwaddr fdt_addr)
+{
+ CPUState *cs;
+
+ for (cs = first_cpu; cs; cs = CPU_NEXT(cs)) {
+ RISCVCPU *riscv_cpu = RISCV_CPU(cs);
+ riscv_cpu->env.kernel_addr = kernel_addr;
+ riscv_cpu->env.fdt_addr = fdt_addr;
+ }
+}
diff --git a/hw/riscv/virt.c b/hw/riscv/virt.c
index c0dc69ff33..4a1fca139c 100644
--- a/hw/riscv/virt.c
+++ b/hw/riscv/virt.c
@@ -728,6 +728,13 @@ static void virt_machine_init(MachineState *machine)
virt_memmap[VIRT_MROM].size, kernel_entry,
fdt_load_addr, machine->fdt);
+ /*
+ * Only direct boot kernel is currently supported for KVM VM,
+ * So here setup kernel start address and fdt address.
+ * TODO:Support firmware loading and integrate to TCG start
+ */
+ riscv_setup_direct_kernel(kernel_entry, fdt_load_addr);
+
/* SiFive Test MMIO device */
sifive_test_create(memmap[VIRT_TEST].base);
diff --git a/include/hw/riscv/boot.h b/include/hw/riscv/boot.h
index 11a21dd584..28d838cc29 100644
--- a/include/hw/riscv/boot.h
+++ b/include/hw/riscv/boot.h
@@ -51,5 +51,6 @@ void riscv_rom_copy_firmware_info(MachineState *machine, hwaddr rom_base,
hwaddr rom_size,
uint32_t reset_vec_size,
uint64_t kernel_entry);
+void riscv_setup_direct_kernel(hwaddr kernel_addr, hwaddr fdt_addr);
#endif /* RISCV_BOOT_H */
diff --git a/target/riscv/cpu.c b/target/riscv/cpu.c
index 7d6ed80f6b..dd34ab4978 100644
--- a/target/riscv/cpu.c
+++ b/target/riscv/cpu.c
@@ -29,6 +29,8 @@
#include "hw/qdev-properties.h"
#include "migration/vmstate.h"
#include "fpu/softfloat-helpers.h"
+#include "sysemu/kvm.h"
+#include "kvm_riscv.h"
/* RISC-V CPU definitions */
@@ -361,6 +363,12 @@ static void riscv_cpu_reset(DeviceState *dev)
cs->exception_index = EXCP_NONE;
env->load_res = -1;
set_default_nan_mode(1, &env->fp_status);
+
+#ifndef CONFIG_USER_ONLY
+ if (kvm_enabled()) {
+ kvm_riscv_reset_vcpu(cpu);
+ }
+#endif
}
static void riscv_cpu_disas_set_info(CPUState *s, disassemble_info *info)
diff --git a/target/riscv/cpu.h b/target/riscv/cpu.h
index 0a33d387ba..a489d94187 100644
--- a/target/riscv/cpu.h
+++ b/target/riscv/cpu.h
@@ -243,6 +243,9 @@ struct CPURISCVState {
/* Fields from here on are preserved across CPU reset. */
QEMUTimer *timer; /* Internal timer */
+
+ hwaddr kernel_addr;
+ hwaddr fdt_addr;
};
OBJECT_DECLARE_TYPE(RISCVCPU, RISCVCPUClass,
diff --git a/target/riscv/kvm-stub.c b/target/riscv/kvm-stub.c
new file mode 100644
index 0000000000..39b96fe3f4
--- /dev/null
+++ b/target/riscv/kvm-stub.c
@@ -0,0 +1,25 @@
+/*
+ * QEMU KVM RISC-V specific function stubs
+ *
+ * Copyright (c) 2020 Huawei Technologies Co., Ltd
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2 or later, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "qemu/osdep.h"
+#include "cpu.h"
+#include "kvm_riscv.h"
+
+void kvm_riscv_reset_vcpu(RISCVCPU *cpu)
+{
+ abort();
+}
diff --git a/target/riscv/kvm.c b/target/riscv/kvm.c
index 9d1441952a..79c931acb4 100644
--- a/target/riscv/kvm.c
+++ b/target/riscv/kvm.c
@@ -37,6 +37,7 @@
#include "hw/irq.h"
#include "qemu/log.h"
#include "hw/loader.h"
+#include "kvm_riscv.h"
static __u64 kvm_riscv_reg_id(CPURISCVState *env, __u64 type, __u64 idx)
{
@@ -440,6 +441,18 @@ int kvm_arch_handle_exit(CPUState *cs, struct kvm_run *run)
return 0;
}
+void kvm_riscv_reset_vcpu(RISCVCPU *cpu)
+{
+ CPURISCVState *env = &cpu->env;
+
+ if (!kvm_enabled()) {
+ return;
+ }
+ env->pc = cpu->env.kernel_addr;
+ env->gpr[10] = kvm_arch_vcpu_id(CPU(cpu)); /* a0 */
+ env->gpr[11] = cpu->env.fdt_addr; /* a1 */
+}
+
bool kvm_arch_cpu_check_are_resettable(void)
{
return true;
diff --git a/target/riscv/kvm_riscv.h b/target/riscv/kvm_riscv.h
new file mode 100644
index 0000000000..f38c82bf59
--- /dev/null
+++ b/target/riscv/kvm_riscv.h
@@ -0,0 +1,24 @@
+/*
+ * QEMU KVM support -- RISC-V specific functions.
+ *
+ * Copyright (c) 2020 Huawei Technologies Co., Ltd
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2 or later, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef QEMU_KVM_RISCV_H
+#define QEMU_KVM_RISCV_H
+
+void kvm_riscv_reset_vcpu(RISCVCPU *cpu);
+
+#endif
diff --git a/target/riscv/meson.build b/target/riscv/meson.build
index 32afd6e882..0f63e3824d 100644
--- a/target/riscv/meson.build
+++ b/target/riscv/meson.build
@@ -23,7 +23,7 @@ riscv_ss.add(files(
'vector_helper.c',
'translate.c',
))
-riscv_ss.add(when: 'CONFIG_KVM', if_true: files('kvm.c'))
+riscv_ss.add(when: 'CONFIG_KVM', if_true: files('kvm.c'), if_false: files('kvm-stub.c'))
riscv_softmmu_ss = ss.source_set()
riscv_softmmu_ss.add(files(
--
2.19.1
next prev parent reply other threads:[~2021-04-12 6:53 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-04-12 6:52 [PATCH RFC v5 00/12] Add riscv kvm accel support Yifei Jiang
2021-04-12 6:52 ` [PATCH RFC v5 01/12] linux-header: Update linux/kvm.h Yifei Jiang
2021-04-12 6:52 ` [PATCH RFC v5 02/12] target/riscv: Add target/riscv/kvm.c to place the public kvm interface Yifei Jiang
2021-04-12 6:52 ` [PATCH RFC v5 03/12] target/riscv: Implement function kvm_arch_init_vcpu Yifei Jiang
2021-04-14 22:32 ` Alistair Francis
2021-04-12 6:52 ` [PATCH RFC v5 04/12] target/riscv: Implement kvm_arch_get_registers Yifei Jiang
2021-04-14 22:39 ` Alistair Francis
2021-04-12 6:52 ` [PATCH RFC v5 05/12] target/riscv: Implement kvm_arch_put_registers Yifei Jiang
2021-04-14 22:46 ` Alistair Francis
2021-04-12 6:52 ` Yifei Jiang [this message]
2021-04-14 22:48 ` [PATCH RFC v5 06/12] target/riscv: Support start kernel directly by KVM Alistair Francis
2021-04-12 6:52 ` [PATCH RFC v5 07/12] hw/riscv: PLIC update external interrupt by KVM when kvm enabled Yifei Jiang
2021-04-14 22:50 ` Alistair Francis
2021-04-30 4:53 ` Anup Patel
2021-05-06 7:59 ` Jiangyifei
2021-04-12 6:52 ` [PATCH RFC v5 08/12] target/riscv: Handle KVM_EXIT_RISCV_SBI exit Yifei Jiang
2021-04-12 6:52 ` [PATCH RFC v5 09/12] target/riscv: Add host cpu type Yifei Jiang
2021-04-14 22:33 ` Alistair Francis
2021-04-12 6:52 ` [PATCH RFC v5 10/12] target/riscv: Add kvm_riscv_get/put_regs_timer Yifei Jiang
2021-04-12 6:52 ` [PATCH RFC v5 11/12] target/riscv: Implement virtual time adjusting with vm state changing Yifei Jiang
2021-04-12 6:52 ` [PATCH RFC v5 12/12] target/riscv: Support virtual time context synchronization Yifei Jiang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210412065246.1853-7-jiangyifei@huawei.com \
--to=jiangyifei@huawei.com \
--cc=Alistair.Francis@wdc.com \
--cc=anup.patel@wdc.com \
--cc=bin.meng@windriver.com \
--cc=fanliang@huawei.com \
--cc=kbastian@mail.uni-paderborn.de \
--cc=kvm-riscv@lists.infradead.org \
--cc=kvm@vger.kernel.org \
--cc=libvir-list@redhat.com \
--cc=palmer@dabbelt.com \
--cc=qemu-devel@nongnu.org \
--cc=qemu-riscv@nongnu.org \
--cc=sagark@eecs.berkeley.edu \
--cc=wu.wubin@huawei.com \
--cc=yinyipeng1@huawei.com \
--cc=zhang.zhanghailiang@huawei.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).