kvm.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Zixuan Wang <zixuanwang@google.com>
To: kvm@vger.kernel.org, pbonzini@redhat.com, drjones@redhat.com
Cc: marcorr@google.com, baekhw@google.com, tmroeder@google.com,
	erdemaktas@google.com, rientjes@google.com, seanjc@google.com,
	brijesh.singh@amd.com, Thomas.Lendacky@amd.com,
	varad.gautam@suse.com, jroedel@suse.de, bp@suse.de,
	Zixuan Wang <zixuanwang@google.com>
Subject: [kvm-unit-tests RFC 07/16] x86 UEFI: Set up RSDP after UEFI boot up
Date: Wed, 18 Aug 2021 00:08:56 +0000	[thread overview]
Message-ID: <20210818000905.1111226-8-zixuanwang@google.com> (raw)
In-Reply-To: <20210818000905.1111226-1-zixuanwang@google.com>

Root system description pointer (RSDP) is a data structure used in the
ACPI programming interface. In BIOS, RSDP is located within a
predefined memory area, so a program can scan the memory area and find
RSDP. But in UEFI, RSDP may not appear in that memory area, instead, a
program should find it in the EFI system table.

This commit provides RSDP set up code in UEFI:
   1. Read RSDP from EFI system table
   2. Pass RSDP pointer to find_acpi_table_attr() function

From this commit, the `x86/s3.c` test can run in UEFI and generates
similar output as in Seabios, note that:
   1. In its output, memory addresses are different than Seabios's, this
      is because EFI application starts from a dynamic runtime address,
      not a fixed predefined memory address
   2. There is a short delay (~5 secs) after the test case prints "PM1a
      event registers" line. This test case sleeps for a few seconds
      and then wakes up, so give it a few seconds to run.

Signed-off-by: Zixuan Wang <zixuanwang@google.com>
---
 lib/x86/acpi.c      | 38 +++++++++++++++++++++++++++++++-------
 lib/x86/acpi.h      |  4 ++++
 lib/x86/asm/setup.h |  2 ++
 lib/x86/setup.c     | 13 +++++++++++++
 4 files changed, 50 insertions(+), 7 deletions(-)

diff --git a/lib/x86/acpi.c b/lib/x86/acpi.c
index 4373106..4b7dc60 100644
--- a/lib/x86/acpi.c
+++ b/lib/x86/acpi.c
@@ -1,9 +1,37 @@
 #include "libcflat.h"
 #include "acpi.h"
 
+#ifdef TARGET_EFI
+struct rsdp_descriptor *efi_rsdp = NULL;
+
+void setup_efi_rsdp(struct rsdp_descriptor *rsdp) {
+	efi_rsdp = rsdp;
+}
+
+static struct rsdp_descriptor *get_rsdp(void) {
+	if (efi_rsdp == NULL) {
+		printf("Can't find RSDP from UEFI, maybe setup_efi_rsdp() is not called\n");
+	}
+	return efi_rsdp;
+}
+#else
+static struct rsdp_descriptor *get_rsdp(void) {
+    struct rsdp_descriptor *rsdp;
+    unsigned long addr;
+    for(addr = 0xf0000; addr < 0x100000; addr += 16) {
+	rsdp = (void*)addr;
+	if (rsdp->signature == 0x2052545020445352LL)
+          break;
+    }
+    if (addr == 0x100000) {
+        return NULL;
+    }
+    return rsdp;
+}
+#endif /* TARGET_EFI */
+
 void* find_acpi_table_addr(u32 sig)
 {
-    unsigned long addr;
     struct rsdp_descriptor *rsdp;
     struct rsdt_descriptor_rev1 *rsdt;
     void *end;
@@ -19,12 +47,8 @@ void* find_acpi_table_addr(u32 sig)
         return (void*)(ulong)fadt->firmware_ctrl;
     }
 
-    for(addr = 0xf0000; addr < 0x100000; addr += 16) {
-	rsdp = (void*)addr;
-	if (rsdp->signature == 0x2052545020445352LL)
-          break;
-    }
-    if (addr == 0x100000) {
+    rsdp = get_rsdp();
+    if (rsdp == NULL) {
         printf("Can't find RSDP\n");
         return 0;
     }
diff --git a/lib/x86/acpi.h b/lib/x86/acpi.h
index 1b80374..da57043 100644
--- a/lib/x86/acpi.h
+++ b/lib/x86/acpi.h
@@ -101,4 +101,8 @@ struct facs_descriptor_rev1
 
 void* find_acpi_table_addr(u32 sig);
 
+#ifdef TARGET_EFI
+void setup_efi_rsdp(struct rsdp_descriptor *rsdp);
+#endif /* TARGET_EFI */
+
 #endif
diff --git a/lib/x86/asm/setup.h b/lib/x86/asm/setup.h
index c22c999..2115a75 100644
--- a/lib/x86/asm/setup.h
+++ b/lib/x86/asm/setup.h
@@ -2,6 +2,7 @@
 #define _X86_ASM_SETUP_H_
 
 #ifdef TARGET_EFI
+#include "x86/acpi.h"
 #include "x86/apic.h"
 #include "x86/smp.h"
 
@@ -19,6 +20,7 @@
 typedef struct {
 	phys_addr_t free_mem_start;
 	phys_addr_t free_mem_size;
+	struct rsdp_descriptor *rsdp;
 } efi_bootinfo_t;
 
 void setup_efi_bootinfo(efi_bootinfo_t *efi_bootinfo);
diff --git a/lib/x86/setup.c b/lib/x86/setup.c
index 0f6e376..3695c4a 100644
--- a/lib/x86/setup.c
+++ b/lib/x86/setup.c
@@ -134,6 +134,7 @@ void setup_efi_bootinfo(efi_bootinfo_t *efi_bootinfo)
 {
 	efi_bootinfo->free_mem_size = 0;
 	efi_bootinfo->free_mem_start = 0;
+	efi_bootinfo->rsdp = NULL;
 }
 
 static EFI_STATUS setup_pre_boot_memory(UINTN *mapkey, efi_bootinfo_t *efi_bootinfo)
@@ -181,6 +182,11 @@ static EFI_STATUS setup_pre_boot_memory(UINTN *mapkey, efi_bootinfo_t *efi_booti
 	return EFI_SUCCESS;
 }
 
+static EFI_STATUS setup_pre_boot_rsdp(efi_bootinfo_t *efi_bootinfo)
+{
+	return LibGetSystemConfigurationTable(&AcpiTableGuid, (VOID **)&efi_bootinfo->rsdp);
+}
+
 EFI_STATUS setup_efi_pre_boot(UINTN *mapkey, efi_bootinfo_t *efi_bootinfo)
 {
 	EFI_STATUS status;
@@ -202,6 +208,12 @@ EFI_STATUS setup_efi_pre_boot(UINTN *mapkey, efi_bootinfo_t *efi_bootinfo)
 		return status;
 	}
 
+	status = setup_pre_boot_rsdp(efi_bootinfo);
+	if (EFI_ERROR(status)) {
+		printf("Cannot find RSDP in EFI system table\n");
+		return status;
+	}
+
 	return EFI_SUCCESS;
 }
 
@@ -255,6 +267,7 @@ void setup_efi(efi_bootinfo_t *efi_bootinfo)
 	smp_init();
 	phys_alloc_init(efi_bootinfo->free_mem_start,
 			efi_bootinfo->free_mem_size);
+	setup_efi_rsdp(efi_bootinfo->rsdp);
 }
 
 #endif /* TARGET_EFI */
-- 
2.33.0.rc1.237.g0d66db33f3-goog


  parent reply	other threads:[~2021-08-18  0:09 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-08-18  0:08 [kvm-unit-tests RFC 00/16] x86_64 UEFI and AMD SEV/SEV-ES support Zixuan Wang
2021-08-18  0:08 ` [kvm-unit-tests RFC 01/16] x86 UEFI: Copy code from GNU-EFI Zixuan Wang
2021-08-18  0:08 ` [kvm-unit-tests RFC 02/16] x86 UEFI: Boot from UEFI Zixuan Wang
2021-08-18  0:08 ` [kvm-unit-tests RFC 03/16] x86 UEFI: Move setjmp.h out of desc.h Zixuan Wang
2021-08-18  0:08 ` [kvm-unit-tests RFC 04/16] x86 UEFI: Load KVM-Unit-Tests IDT after UEFI boot up Zixuan Wang
2021-08-18  0:08 ` [kvm-unit-tests RFC 05/16] x86 UEFI: Load GDT and TSS " Zixuan Wang
2021-08-18  0:08 ` [kvm-unit-tests RFC 06/16] x86 UEFI: Set up memory allocator Zixuan Wang
2021-08-18  0:08 ` Zixuan Wang [this message]
2021-08-18  0:08 ` [kvm-unit-tests RFC 08/16] x86 UEFI: Set up page tables Zixuan Wang
2021-08-18  0:08 ` [kvm-unit-tests RFC 09/16] x86 UEFI: Convert x86 test cases to PIC Zixuan Wang
2021-08-18  0:08 ` [kvm-unit-tests RFC 10/16] x86 AMD SEV: Initial support Zixuan Wang
2021-08-18  0:09 ` [kvm-unit-tests RFC 11/16] x86 AMD SEV: Page table with c-bit Zixuan Wang
2021-08-18  0:09 ` [kvm-unit-tests RFC 12/16] x86 AMD SEV-ES: Check SEV-ES status Zixuan Wang
2021-08-18  0:09 ` [kvm-unit-tests RFC 13/16] x86 AMD SEV-ES: Load GDT with UEFI segments Zixuan Wang
2021-08-18  0:09 ` [kvm-unit-tests RFC 14/16] x86 AMD SEV-ES: Copy UEFI #VC IDT entry Zixuan Wang
2021-08-20 23:50   ` Sean Christopherson
2021-08-21  0:37     ` Marc Orr
2021-08-21  0:47     ` Zixuan Wang
2021-08-18  0:09 ` [kvm-unit-tests RFC 15/16] x86 AMD SEV-ES: Set up GHCB page Zixuan Wang
2021-08-18  0:09 ` [kvm-unit-tests RFC 16/16] x86 AMD SEV-ES: Add test cases Zixuan Wang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210818000905.1111226-8-zixuanwang@google.com \
    --to=zixuanwang@google.com \
    --cc=Thomas.Lendacky@amd.com \
    --cc=baekhw@google.com \
    --cc=bp@suse.de \
    --cc=brijesh.singh@amd.com \
    --cc=drjones@redhat.com \
    --cc=erdemaktas@google.com \
    --cc=jroedel@suse.de \
    --cc=kvm@vger.kernel.org \
    --cc=marcorr@google.com \
    --cc=pbonzini@redhat.com \
    --cc=rientjes@google.com \
    --cc=seanjc@google.com \
    --cc=tmroeder@google.com \
    --cc=varad.gautam@suse.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).