From: Sakari Ailus <sakari.ailus@linux.intel.com>
To: linux-i2c@vger.kernel.org
Cc: Wolfram Sang <wsa@the-dreams.de>,
"Rafael J. Wysocki" <rafael@kernel.org>,
linux-acpi@vger.kernel.org, linux-kernel@vger.kernel.org,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
rajmohan.mani@intel.com, Tomasz Figa <tfiga@chromium.org>,
Bartosz Golaszewski <bgolaszewski@baylibre.com>,
Bingbu Cao <bingbu.cao@intel.com>,
Chiranjeevi Rapolu <chiranjeevi.rapolu@intel.com>,
Hyungwoo Yang <hyungwoo.yang@intel.com>,
linux-media@vger.kernel.org
Subject: [PATCH v9 6/7] media: i2c: imx319: Support probe while the device is off
Date: Fri, 29 Jan 2021 01:27:28 +0200 [thread overview]
Message-ID: <20210128232729.16064-6-sakari.ailus@linux.intel.com> (raw)
In-Reply-To: <20200903081550.6012-1-sakari.ailus@linux.intel.com>
From: Rajmohan Mani <rajmohan.mani@intel.com>
Tell ACPI device PM code that the driver supports the device being powered
off when the driver's probe function is entered.
Signed-off-by: Rajmohan Mani <rajmohan.mani@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
---
drivers/media/i2c/imx319.c | 72 +++++++++++++++++++++++---------------
1 file changed, 44 insertions(+), 28 deletions(-)
diff --git a/drivers/media/i2c/imx319.c b/drivers/media/i2c/imx319.c
index 8473c0bbb35d6..e0b22e9318fed 100644
--- a/drivers/media/i2c/imx319.c
+++ b/drivers/media/i2c/imx319.c
@@ -140,6 +140,8 @@ struct imx319 {
/* Streaming on/off */
bool streaming;
+ /* True if the device has been identified */
+ bool identified;
};
static const struct imx319_reg imx319_global_regs[] = {
@@ -2084,6 +2086,31 @@ imx319_set_pad_format(struct v4l2_subdev *sd,
return 0;
}
+/* Verify chip ID */
+static int imx319_identify_module(struct imx319 *imx319)
+{
+ struct i2c_client *client = v4l2_get_subdevdata(&imx319->sd);
+ int ret;
+ u32 val;
+
+ if (imx319->identified)
+ return 0;
+
+ ret = imx319_read_reg(imx319, IMX319_REG_CHIP_ID, 2, &val);
+ if (ret)
+ return ret;
+
+ if (val != IMX319_CHIP_ID) {
+ dev_err(&client->dev, "chip id mismatch: %x!=%x",
+ IMX319_CHIP_ID, val);
+ return -EIO;
+ }
+
+ imx319->identified = true;
+
+ return 0;
+}
+
/* Start streaming */
static int imx319_start_streaming(struct imx319 *imx319)
{
@@ -2091,6 +2118,10 @@ static int imx319_start_streaming(struct imx319 *imx319)
const struct imx319_reg_list *reg_list;
int ret;
+ ret = imx319_identify_module(imx319);
+ if (ret)
+ return ret;
+
/* Global Setting */
reg_list = &imx319_global_setting;
ret = imx319_write_regs(imx319, reg_list->regs, reg_list->num_of_regs);
@@ -2208,26 +2239,6 @@ static int __maybe_unused imx319_resume(struct device *dev)
return ret;
}
-/* Verify chip ID */
-static int imx319_identify_module(struct imx319 *imx319)
-{
- struct i2c_client *client = v4l2_get_subdevdata(&imx319->sd);
- int ret;
- u32 val;
-
- ret = imx319_read_reg(imx319, IMX319_REG_CHIP_ID, 2, &val);
- if (ret)
- return ret;
-
- if (val != IMX319_CHIP_ID) {
- dev_err(&client->dev, "chip id mismatch: %x!=%x",
- IMX319_CHIP_ID, val);
- return -EIO;
- }
-
- return 0;
-}
-
static const struct v4l2_subdev_core_ops imx319_subdev_core_ops = {
.subscribe_event = v4l2_ctrl_subdev_subscribe_event,
.unsubscribe_event = v4l2_event_subdev_unsubscribe,
@@ -2422,6 +2433,7 @@ static struct imx319_hwcfg *imx319_get_hwcfg(struct device *dev)
static int imx319_probe(struct i2c_client *client)
{
struct imx319 *imx319;
+ bool low_power;
int ret;
u32 i;
@@ -2434,11 +2446,14 @@ static int imx319_probe(struct i2c_client *client)
/* Initialize subdev */
v4l2_i2c_subdev_init(&imx319->sd, client, &imx319_subdev_ops);
- /* Check module identity */
- ret = imx319_identify_module(imx319);
- if (ret) {
- dev_err(&client->dev, "failed to find sensor: %d", ret);
- goto error_probe;
+ low_power = acpi_dev_state_low_power(&client->dev);
+ if (!low_power) {
+ /* Check module identity */
+ ret = imx319_identify_module(imx319);
+ if (ret) {
+ dev_err(&client->dev, "failed to find sensor: %d", ret);
+ goto error_probe;
+ }
}
imx319->hwcfg = imx319_get_hwcfg(&client->dev);
@@ -2491,10 +2506,10 @@ static int imx319_probe(struct i2c_client *client)
goto error_media_entity;
/*
- * Device is already turned on by i2c-core with ACPI domain PM.
- * Enable runtime PM and turn off the device.
+ * Don't set the device's state to active if it's in a low power state.
*/
- pm_runtime_set_active(&client->dev);
+ if (!low_power)
+ pm_runtime_set_active(&client->dev);
pm_runtime_enable(&client->dev);
pm_runtime_idle(&client->dev);
@@ -2547,6 +2562,7 @@ static struct i2c_driver imx319_i2c_driver = {
},
.probe_new = imx319_probe,
.remove = imx319_remove,
+ .flags = I2C_DRV_FL_ALLOW_LOW_POWER_PROBE,
};
module_i2c_driver(imx319_i2c_driver);
--
2.20.1
next prev parent reply other threads:[~2021-01-28 23:30 UTC|newest]
Thread overview: 41+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-09-03 8:15 [PATCH v8 0/6] Support running driver's probe for a device powered off Sakari Ailus
2020-09-03 8:15 ` [PATCH v8 1/6] i2c: Allow an ACPI driver to manage the device's power state during probe Sakari Ailus
2020-09-03 8:15 ` [PATCH v8 2/6] Documentation: ACPI: Document i2c-allow-low-power-probe _DSD property Sakari Ailus
2020-09-03 8:15 ` [PATCH v8 3/6] ACPI: Add a convenience function to tell a device is in low power state Sakari Ailus
[not found] ` <0c2d4728-6e32-ef93-8961-381fe36cfdaa@linux.intel.com>
2020-09-11 13:01 ` Sakari Ailus
2020-09-03 8:15 ` [PATCH v8 4/6] ov5670: Support probe whilst the device is in a " Sakari Ailus
2020-09-03 8:15 ` [PATCH v8 5/6] media: i2c: imx319: Support probe while the device is off Sakari Ailus
2020-09-03 8:15 ` [PATCH v8 6/6] at24: Support probing while off Sakari Ailus
2020-09-09 9:35 ` Bartosz Golaszewski
2020-09-09 11:11 ` Wolfram Sang
2020-09-09 11:56 ` Bartosz Golaszewski
2020-09-09 12:16 ` Sakari Ailus
2020-09-11 12:11 ` Sakari Ailus
2020-10-06 11:20 ` Tomasz Figa
2020-10-06 11:23 ` Tomasz Figa
2020-09-11 12:49 ` [PATCH v8 0/6] Support running driver's probe for a device powered off Luca Ceresoli
2020-09-11 13:01 ` Sakari Ailus
2020-09-14 7:58 ` Luca Ceresoli
[not found] ` <20200914094727.GM26842@paasikivi.fi.intel.com>
2020-09-14 16:49 ` Luca Ceresoli
2020-09-23 11:08 ` Sakari Ailus
2020-09-23 15:37 ` Luca Ceresoli
2020-09-26 12:38 ` Tomasz Figa
2020-09-27 19:39 ` Wolfram Sang
2020-09-27 19:44 ` Tomasz Figa
2020-09-28 14:17 ` Rafael J. Wysocki
2020-09-28 16:49 ` Tomasz Figa
2020-09-28 20:49 ` Sakari Ailus
2020-09-26 12:46 ` Tomasz Figa
2021-01-28 23:27 ` [PATCH v9 1/7] ACPI: scan: Obtain device's desired enumeration power state Sakari Ailus
[not found] ` <CAJZ5v0hdG1W0D5E6GbrTDiAjMyC0mSgb3Z2WEBy3hhb4iJhDNw@mail.gmail.com>
2021-01-29 16:45 ` Sakari Ailus
2021-01-29 16:57 ` Rafael J. Wysocki
2021-01-29 21:22 ` Sakari Ailus
2021-02-01 11:44 ` Rafael J. Wysocki
2021-01-28 23:27 ` [PATCH v9 2/7] i2c: Allow an ACPI driver to manage the device's power state during probe Sakari Ailus
2021-01-28 23:27 ` [PATCH v9 3/7] Documentation: ACPI: Document _PRE object usage for enum power state Sakari Ailus
2021-01-28 23:27 ` [PATCH v9 4/7] ACPI: Add a convenience function to tell a device is in low " Sakari Ailus
2021-01-28 23:27 ` [PATCH v9 5/7] ov5670: Support probe whilst the device is in a " Sakari Ailus
2021-01-28 23:27 ` Sakari Ailus [this message]
2021-01-29 2:58 ` [PATCH v9 6/7] media: i2c: imx319: Support probe while the device is off Bingbu Cao
2021-01-28 23:27 ` [PATCH v9 7/7] at24: Support probing while off Sakari Ailus
[not found] ` <CAMpxmJVTPgvxOVdTkmt4VjUnGabNBKauKF_DKtnnkV6O0QYTWA@mail.gmail.com>
[not found] ` <20210129121955.GH32460@paasikivi.fi.intel.com>
2021-02-01 8:57 ` Bartosz Golaszewski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210128232729.16064-6-sakari.ailus@linux.intel.com \
--to=sakari.ailus@linux.intel.com \
--cc=bgolaszewski@baylibre.com \
--cc=bingbu.cao@intel.com \
--cc=chiranjeevi.rapolu@intel.com \
--cc=gregkh@linuxfoundation.org \
--cc=hyungwoo.yang@intel.com \
--cc=linux-acpi@vger.kernel.org \
--cc=linux-i2c@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=rafael@kernel.org \
--cc=rajmohan.mani@intel.com \
--cc=tfiga@chromium.org \
--cc=wsa@the-dreams.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).