linux-acpi.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Andy Shevchenko <andy.shevchenko@gmail.com>
To: Biwen Li <biwen.li@nxp.com>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>,
	Leo Li <leoyang.li@nxp.com>,
	Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com>,
	Udit Kumar <udit.kumar@nxp.com>, Wolfram Sang <wsa@the-dreams.de>,
	"Rafael J. Wysocki" <rjw@rjwysocki.net>,
	Chuanhua Han <chuanhua.han@nxp.com>,
	Shawn Guo <shawnguo@kernel.org>,
	Sascha Hauer <s.hauer@pengutronix.de>,
	ACPI Devel Maling List <linux-acpi@vger.kernel.org>,
	Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
	linux-i2c <linux-i2c@vger.kernel.org>,
	linux-arm Mailing List <linux-arm-kernel@lists.infradead.org>
Subject: Re: [v2] ACPI: support for NXP i2c controller
Date: Fri, 6 Sep 2019 13:31:56 +0300	[thread overview]
Message-ID: <CAHp75Vcz+ruwvq_yu6Oj69XTezsdnne049Ma=oTRPjRXJKnhPQ@mail.gmail.com> (raw)
In-Reply-To: <20190906075319.21244-1-biwen.li@nxp.com>

On Fri, Sep 6, 2019 at 11:03 AM Biwen Li <biwen.li@nxp.com> wrote:
>
> From: Chuanhua Han <chuanhua.han@nxp.com>
>
> Enable NXP i2c controller to boot with ACPI
>

Thanks, the code looks good to me,
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>

though...

> Signed-off-by: Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com>
> Signed-off-by: Udit Kumar <udit.kumar@nxp.com>
> Signed-off-by: Chuanhua Han <chuanhua.han@nxp.com>

This SoB chain is a bit odd. Who is the author of this? The first SoB
in the chain usually points to the first (main) author. There is also
possible to change that, though in that case for the rest we now use
Co-developed-by tag rather than SoB.
In any case, if Rafael and Wolfram are okay with this, I have no objections.

> Signed-off-by: Biwen Li <biwen.li@nxp.com>
> ---
> Change in v2:
>         - Simplify code
>         - Adjust header file order
>         - Not use ACPI_PTR()
>
>  drivers/acpi/acpi_apd.c      |  7 +++++++
>  drivers/i2c/busses/i2c-imx.c | 17 +++++++++++++----
>  2 files changed, 20 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/acpi/acpi_apd.c b/drivers/acpi/acpi_apd.c
> index 7cd0c9ac71ea..71511ae2dfcd 100644
> --- a/drivers/acpi/acpi_apd.c
> +++ b/drivers/acpi/acpi_apd.c
> @@ -160,11 +160,17 @@ static const struct apd_device_desc hip08_i2c_desc = {
>         .setup = acpi_apd_setup,
>         .fixed_clk_rate = 250000000,
>  };
> +
>  static const struct apd_device_desc thunderx2_i2c_desc = {
>         .setup = acpi_apd_setup,
>         .fixed_clk_rate = 125000000,
>  };
>
> +static const struct apd_device_desc nxp_i2c_desc = {
> +       .setup = acpi_apd_setup,
> +       .fixed_clk_rate = 350000000,
> +};
> +
>  static const struct apd_device_desc hip08_spi_desc = {
>         .setup = acpi_apd_setup,
>         .fixed_clk_rate = 250000000,
> @@ -238,6 +244,7 @@ static const struct acpi_device_id acpi_apd_device_ids[] = {
>         { "HISI02A1", APD_ADDR(hip07_i2c_desc) },
>         { "HISI02A2", APD_ADDR(hip08_i2c_desc) },
>         { "HISI0173", APD_ADDR(hip08_spi_desc) },
> +       { "NXP0001", APD_ADDR(nxp_i2c_desc) },
>  #endif
>         { }
>  };
> diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c
> index 15f6cde6452f..a3b61336fe55 100644
> --- a/drivers/i2c/busses/i2c-imx.c
> +++ b/drivers/i2c/busses/i2c-imx.c
> @@ -20,6 +20,7 @@
>   *
>   */
>
> +#include <linux/acpi.h>
>  #include <linux/clk.h>
>  #include <linux/completion.h>
>  #include <linux/delay.h>
> @@ -255,6 +256,12 @@ static const struct of_device_id i2c_imx_dt_ids[] = {
>  };
>  MODULE_DEVICE_TABLE(of, i2c_imx_dt_ids);
>
> +static const struct acpi_device_id i2c_imx_acpi_ids[] = {
> +       {"NXP0001", .driver_data = (kernel_ulong_t)&vf610_i2c_hwdata},
> +       { }
> +};
> +MODULE_DEVICE_TABLE(acpi, i2c_imx_acpi_ids);
> +
>  static inline int is_imx1_i2c(struct imx_i2c_struct *i2c_imx)
>  {
>         return i2c_imx->hwdata->devtype == IMX1_I2C;
> @@ -1048,14 +1055,13 @@ static const struct i2c_algorithm i2c_imx_algo = {
>
>  static int i2c_imx_probe(struct platform_device *pdev)
>  {
> -       const struct of_device_id *of_id = of_match_device(i2c_imx_dt_ids,
> -                                                          &pdev->dev);
>         struct imx_i2c_struct *i2c_imx;
>         struct resource *res;
>         struct imxi2c_platform_data *pdata = dev_get_platdata(&pdev->dev);
>         void __iomem *base;
>         int irq, ret;
>         dma_addr_t phy_addr;
> +       const struct imx_i2c_hwdata *match;
>
>         dev_dbg(&pdev->dev, "<%s>\n", __func__);
>
> @@ -1075,8 +1081,9 @@ static int i2c_imx_probe(struct platform_device *pdev)
>         if (!i2c_imx)
>                 return -ENOMEM;
>
> -       if (of_id)
> -               i2c_imx->hwdata = of_id->data;
> +       match = device_get_match_data(&pdev->dev);
> +       if (match)
> +               i2c_imx->hwdata = match;
>         else
>                 i2c_imx->hwdata = (struct imx_i2c_hwdata *)
>                                 platform_get_device_id(pdev)->driver_data;
> @@ -1089,6 +1096,7 @@ static int i2c_imx_probe(struct platform_device *pdev)
>         i2c_imx->adapter.nr             = pdev->id;
>         i2c_imx->adapter.dev.of_node    = pdev->dev.of_node;
>         i2c_imx->base                   = base;
> +       ACPI_COMPANION_SET(&i2c_imx->adapter.dev, ACPI_COMPANION(&pdev->dev));
>
>         /* Get I2C clock */
>         i2c_imx->clk = devm_clk_get(&pdev->dev, NULL);
> @@ -1247,6 +1255,7 @@ static struct platform_driver i2c_imx_driver = {
>                 .name = DRIVER_NAME,
>                 .pm = &i2c_imx_pm_ops,
>                 .of_match_table = i2c_imx_dt_ids,
> +               .acpi_match_table = i2c_imx_acpi_ids,
>         },
>         .id_table = imx_i2c_devtype,
>  };
> --
> 2.17.1
>


-- 
With Best Regards,
Andy Shevchenko

  reply	other threads:[~2019-09-06 10:32 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-09-06  7:53 [v2] ACPI: support for NXP i2c controller Biwen Li
2019-09-06 10:31 ` Andy Shevchenko [this message]
2019-09-11  6:23   ` [EXT] " Biwen Li
2019-09-06 14:39 ` Oleksij Rempel
2019-09-11  6:25 ` Biwen Li
2019-09-13 14:13 ` Wolfram Sang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to='CAHp75Vcz+ruwvq_yu6Oj69XTezsdnne049Ma=oTRPjRXJKnhPQ@mail.gmail.com' \
    --to=andy.shevchenko@gmail.com \
    --cc=biwen.li@nxp.com \
    --cc=chuanhua.han@nxp.com \
    --cc=leoyang.li@nxp.com \
    --cc=linux-acpi@vger.kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-i2c@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=meenakshi.aggarwal@nxp.com \
    --cc=rafael@kernel.org \
    --cc=rjw@rjwysocki.net \
    --cc=s.hauer@pengutronix.de \
    --cc=shawnguo@kernel.org \
    --cc=udit.kumar@nxp.com \
    --cc=wsa@the-dreams.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).