From: Jerome Brunet <jbrunet@baylibre.com>
To: Kevin Hilman <khilman@baylibre.com>
Cc: linux-amlogic@lists.infradead.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
Jerome Brunet <jbrunet@baylibre.com>
Subject: [PATCH] arm64: dts: meson: g12a: add audio devices resets
Date: Wed, 25 Sep 2019 11:33:58 +0200 [thread overview]
Message-ID: <20190925093358.15476-1-jbrunet@baylibre.com> (raw)
Provide the reset lines coming from the audio clock controller to
the audio devices of the g12 family
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
---
arch/arm64/boot/dts/amlogic/meson-g12.dtsi | 28 +++++++++++++++++-----
1 file changed, 22 insertions(+), 6 deletions(-)
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12.dtsi
index 0d9df29994f3..3cf74fc96434 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12.dtsi
@@ -103,7 +103,9 @@
sound-name-prefix = "TODDR_A";
interrupts = <GIC_SPI 148 IRQ_TYPE_EDGE_RISING>;
clocks = <&clkc_audio AUD_CLKID_TODDR_A>;
- resets = <&arb AXG_ARB_TODDR_A>;
+ resets = <&arb AXG_ARB_TODDR_A>,
+ <&clkc_audio AUD_RESET_TODDR_A>;
+ reset-names = "arb", "rst";
status = "disabled";
};
@@ -115,7 +117,9 @@
sound-name-prefix = "TODDR_B";
interrupts = <GIC_SPI 149 IRQ_TYPE_EDGE_RISING>;
clocks = <&clkc_audio AUD_CLKID_TODDR_B>;
- resets = <&arb AXG_ARB_TODDR_B>;
+ resets = <&arb AXG_ARB_TODDR_B>,
+ <&clkc_audio AUD_RESET_TODDR_B>;
+ reset-names = "arb", "rst";
status = "disabled";
};
@@ -127,7 +131,9 @@
sound-name-prefix = "TODDR_C";
interrupts = <GIC_SPI 150 IRQ_TYPE_EDGE_RISING>;
clocks = <&clkc_audio AUD_CLKID_TODDR_C>;
- resets = <&arb AXG_ARB_TODDR_C>;
+ resets = <&arb AXG_ARB_TODDR_C>,
+ <&clkc_audio AUD_RESET_TODDR_C>;
+ reset-names = "arb", "rst";
status = "disabled";
};
@@ -139,7 +145,9 @@
sound-name-prefix = "FRDDR_A";
interrupts = <GIC_SPI 152 IRQ_TYPE_EDGE_RISING>;
clocks = <&clkc_audio AUD_CLKID_FRDDR_A>;
- resets = <&arb AXG_ARB_FRDDR_A>;
+ resets = <&arb AXG_ARB_FRDDR_A>,
+ <&clkc_audio AUD_RESET_FRDDR_A>;
+ reset-names = "arb", "rst";
status = "disabled";
};
@@ -151,7 +159,9 @@
sound-name-prefix = "FRDDR_B";
interrupts = <GIC_SPI 153 IRQ_TYPE_EDGE_RISING>;
clocks = <&clkc_audio AUD_CLKID_FRDDR_B>;
- resets = <&arb AXG_ARB_FRDDR_B>;
+ resets = <&arb AXG_ARB_FRDDR_B>,
+ <&clkc_audio AUD_RESET_FRDDR_B>;
+ reset-names = "arb", "rst";
status = "disabled";
};
@@ -163,7 +173,9 @@
sound-name-prefix = "FRDDR_C";
interrupts = <GIC_SPI 154 IRQ_TYPE_EDGE_RISING>;
clocks = <&clkc_audio AUD_CLKID_FRDDR_C>;
- resets = <&arb AXG_ARB_FRDDR_C>;
+ resets = <&arb AXG_ARB_FRDDR_C>,
+ <&clkc_audio AUD_RESET_FRDDR_C>;
+ reset-names = "arb", "rst";
status = "disabled";
};
@@ -249,6 +261,7 @@
clocks = <&clkc_audio AUD_CLKID_SPDIFIN>,
<&clkc_audio AUD_CLKID_SPDIFIN_CLK>;
clock-names = "pclk", "refclk";
+ resets = <&clkc_audio AUD_RESET_SPDIFIN>;
status = "disabled";
};
@@ -261,6 +274,7 @@
clocks = <&clkc_audio AUD_CLKID_SPDIFOUT>,
<&clkc_audio AUD_CLKID_SPDIFOUT_CLK>;
clock-names = "pclk", "mclk";
+ resets = <&clkc_audio AUD_RESET_SPDIFOUT>;
status = "disabled";
};
@@ -318,6 +332,7 @@
clocks = <&clkc_audio AUD_CLKID_SPDIFOUT_B>,
<&clkc_audio AUD_CLKID_SPDIFOUT_B_CLK>;
clock-names = "pclk", "mclk";
+ resets = <&clkc_audio AUD_RESET_SPDIFOUT_B>;
status = "disabled";
};
@@ -326,6 +341,7 @@
reg = <0x0 0x744 0x0 0x4>;
#sound-dai-cells = <1>;
sound-name-prefix = "TOHDMITX";
+ resets = <&clkc_audio AUD_RESET_TOHDMITX>;
status = "disabled";
};
};
--
2.21.0
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
next reply other threads:[~2019-09-25 9:34 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-09-25 9:33 Jerome Brunet [this message]
2019-09-27 9:08 ` [PATCH] arm64: dts: meson: g12a: add audio devices resets Neil Armstrong
2019-10-03 17:46 ` Kevin Hilman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190925093358.15476-1-jbrunet@baylibre.com \
--to=jbrunet@baylibre.com \
--cc=devicetree@vger.kernel.org \
--cc=khilman@baylibre.com \
--cc=linux-amlogic@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).