linux-amlogic.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Ayan Halder <Ayan.Halder@arm.com>
To: Neil Armstrong <narmstrong@baylibre.com>
Cc: "khilman@baylibre.com" <khilman@baylibre.com>, nd <nd@arm.com>,
	"linux-arm-kernel@lists.infradead.org"
	<linux-arm-kernel@lists.infradead.org>,
	"dri-devel@lists.freedesktop.org"
	<dri-devel@lists.freedesktop.org>,
	"linux-amlogic@lists.infradead.org"
	<linux-amlogic@lists.infradead.org>
Subject: Re: [PATCH 4/7] drm/meson: plane: add support for AFBC mode for OSD1 plane
Date: Thu, 10 Oct 2019 13:26:02 +0000	[thread overview]
Message-ID: <20191010132601.GA10110@arm.com> (raw)
In-Reply-To: <20191010092526.10419-5-narmstrong@baylibre.com>

On Thu, Oct 10, 2019 at 11:25:23AM +0200, Neil Armstrong wrote:
> This adds all the OSD configuration plumbing to support the AFBC decoders
> path to display of the OSD1 plane.
> 
> The Amlogic GXM and G12A AFBC decoders are integrated very differently.
> 
> The Amlogic GXM has a direct output path to the OSD1 VIU pixel input,
> because the GXM AFBC decoder seem to be a custom IP developed by Amlogic.
> 
> On the other side, the Amlogic G12A AFBC decoder seems to be an external
> IP that emit pixels on an AXI master hooked to a "Mali Unpack" block
> feeding the OSD1 VIU pixel input.
> This uses a weird "0x1000000" internal HW physical address on both
> sides to transfer the pixels.
> 
> For Amlogic GXM, the supported pixel formats are the same as the normal
> linear OSD1 mode.
> 
> On the other side, Amlogic added support for all AFBC v1.2 formats for
> the G12A AFBC integration.
> 
> For simplicity, we stick to the already supported formats for now.
> 
> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
> ---
>  drivers/gpu/drm/meson/meson_crtc.c  |   2 +
>  drivers/gpu/drm/meson/meson_drv.h   |   4 +
>  drivers/gpu/drm/meson/meson_plane.c | 215 ++++++++++++++++++++++++----
>  3 files changed, 190 insertions(+), 31 deletions(-)
> 
> diff --git a/drivers/gpu/drm/meson/meson_crtc.c b/drivers/gpu/drm/meson/meson_crtc.c
> index 57ae1c13d1e6..d478fa232951 100644
> --- a/drivers/gpu/drm/meson/meson_crtc.c
> +++ b/drivers/gpu/drm/meson/meson_crtc.c
> @@ -281,6 +281,8 @@ void meson_crtc_irq(struct meson_drm *priv)
>  	if (priv->viu.osd1_enabled && priv->viu.osd1_commit) {
>  		writel_relaxed(priv->viu.osd1_ctrl_stat,
>  				priv->io_base + _REG(VIU_OSD1_CTRL_STAT));
> +		writel_relaxed(priv->viu.osd1_ctrl_stat2,
> +				priv->io_base + _REG(VIU_OSD1_CTRL_STAT2));
>  		writel_relaxed(priv->viu.osd1_blk0_cfg[0],
>  				priv->io_base + _REG(VIU_OSD1_BLK0_CFG_W0));
>  		writel_relaxed(priv->viu.osd1_blk0_cfg[1],
> diff --git a/drivers/gpu/drm/meson/meson_drv.h b/drivers/gpu/drm/meson/meson_drv.h
> index 60f13c6f34e5..de25349be8aa 100644
> --- a/drivers/gpu/drm/meson/meson_drv.h
> +++ b/drivers/gpu/drm/meson/meson_drv.h
> @@ -53,8 +53,12 @@ struct meson_drm {
>  		bool osd1_enabled;
>  		bool osd1_interlace;
>  		bool osd1_commit;
> +		bool osd1_afbcd;
>  		uint32_t osd1_ctrl_stat;
> +		uint32_t osd1_ctrl_stat2;
>  		uint32_t osd1_blk0_cfg[5];
> +		uint32_t osd1_blk1_cfg4;
> +		uint32_t osd1_blk2_cfg4;
>  		uint32_t osd1_addr;
>  		uint32_t osd1_stride;
>  		uint32_t osd1_height;
> diff --git a/drivers/gpu/drm/meson/meson_plane.c b/drivers/gpu/drm/meson/meson_plane.c
> index 5e798c276037..412941aa8402 100644
> --- a/drivers/gpu/drm/meson/meson_plane.c
> +++ b/drivers/gpu/drm/meson/meson_plane.c
> @@ -23,6 +23,7 @@
>  #include "meson_plane.h"
>  #include "meson_registers.h"
>  #include "meson_viu.h"
> +#include "meson_osd_afbcd.h"
>  
>  /* OSD_SCI_WH_M1 */
>  #define SCI_WH_M1_W(w)			FIELD_PREP(GENMASK(28, 16), w)
> @@ -92,12 +93,38 @@ static int meson_plane_atomic_check(struct drm_plane *plane,
>  						   false, true);
>  }
>  
> +#define MESON_MOD_AFBC_VALID_BITS (AFBC_FORMAT_MOD_BLOCK_SIZE_16x16 |	\
> +				   AFBC_FORMAT_MOD_BLOCK_SIZE_32x8 |	\
> +				   AFBC_FORMAT_MOD_YTR |		\
> +				   AFBC_FORMAT_MOD_SPARSE |		\
> +				   AFBC_FORMAT_MOD_SPLIT)
> +
>  /* Takes a fixed 16.16 number and converts it to integer. */
>  static inline int64_t fixed16_to_int(int64_t value)
>  {
>  	return value >> 16;
>  }
>  
> +static u32 meson_g12a_afbcd_line_stride(struct meson_drm *priv)
> +{
> +	u32 line_stride = 0;
> +
> +	switch (priv->afbcd.format) {
> +	case DRM_FORMAT_RGB565:
> +		line_stride = ((priv->viu.osd1_width << 4) + 127) >> 7;
> +		break;
> +	case DRM_FORMAT_RGB888:
> +	case DRM_FORMAT_XRGB8888:
> +	case DRM_FORMAT_ARGB8888:
> +	case DRM_FORMAT_XBGR8888:
> +	case DRM_FORMAT_ABGR8888:
Please have a look at
https://www.kernel.org/doc/html/latest/gpu/afbc.html for our
recommendation. We suggest that *X* formats are avoided.

Also, for interoperability and maximum compression efficiency (with
AFBC_FORMAT_MOD_YTR), we suggest the following order :-

        Component 0: R
        Component 1: G
        Component 2: B
        Component 3: A (if available)

Thus, DRM_FORMAT_ABGR, DRM_FORMAT_BGR should only be allowed.
> +		line_stride = ((priv->viu.osd1_width << 5) + 127) >> 7;
> +		break;
> +	}
> +
> +	return ((line_stride + 1) >> 1) << 1;
> +}
> +
>  static void meson_plane_atomic_update(struct drm_plane *plane,
>  				      struct drm_plane_state *old_state)
>  {
> @@ -126,57 +153,88 @@ static void meson_plane_atomic_update(struct drm_plane *plane,
>  	 */
>  	spin_lock_irqsave(&priv->drm->event_lock, flags);
>  
> +	/* Check if AFBC decoder is required for this buffer */
> +	if ((meson_vpu_is_compatible(priv, VPU_COMPATIBLE_GXM) ||
> +	     meson_vpu_is_compatible(priv, VPU_COMPATIBLE_G12A)) &&
> +	    fb->modifier & DRM_FORMAT_MOD_ARM_AFBC(MESON_MOD_AFBC_VALID_BITS))
> +		priv->viu.osd1_afbcd = true;
> +	else
> +		priv->viu.osd1_afbcd = false;
> +
>  	/* Enable OSD and BLK0, set max global alpha */
>  	priv->viu.osd1_ctrl_stat = OSD_ENABLE |
>  				   (0xFF << OSD_GLOBAL_ALPHA_SHIFT) |
>  				   OSD_BLK0_ENABLE;
>  
> +	priv->viu.osd1_ctrl_stat2 = readl(priv->io_base +
> +					  _REG(VIU_OSD1_CTRL_STAT2));
> +
>  	canvas_id_osd1 = priv->canvas_id_osd1;
>  
>  	/* Set up BLK0 to point to the right canvas */
> -	priv->viu.osd1_blk0_cfg[0] = ((canvas_id_osd1 << OSD_CANVAS_SEL) |
> -				      OSD_ENDIANNESS_LE);
> +	priv->viu.osd1_blk0_cfg[0] = canvas_id_osd1 << OSD_CANVAS_SEL;
> +
> +	if (priv->viu.osd1_afbcd) {
> +		if (meson_vpu_is_compatible(priv, VPU_COMPATIBLE_G12A)) {
> +			/* This is the internal decoding memory address */
> +			priv->viu.osd1_blk1_cfg4 = MESON_G12A_AFBCD_OUT_ADDR;
> +			priv->viu.osd1_blk0_cfg[0] |= OSD_ENDIANNESS_BE;
> +			priv->viu.osd1_ctrl_stat2 |= OSD_PENDING_STAT_CLEAN;
> +		}
> +
> +		if (meson_vpu_is_compatible(priv, VPU_COMPATIBLE_GXM)) {
> +			priv->viu.osd1_blk0_cfg[0] |= OSD_ENDIANNESS_LE;
> +			priv->viu.osd1_ctrl_stat2 |= OSD_DPATH_MALI_AFBCD;
> +		}
> +	} else {
> +		priv->viu.osd1_blk0_cfg[0] |= OSD_ENDIANNESS_LE;
> +
> +		if (meson_vpu_is_compatible(priv, VPU_COMPATIBLE_GXM))
> +			priv->viu.osd1_ctrl_stat2 &= ~OSD_DPATH_MALI_AFBCD;
> +	}
>  
>  	/* On GXBB, Use the old non-HDR RGB2YUV converter */
>  	if (meson_vpu_is_compatible(priv, VPU_COMPATIBLE_GXBB))
>  		priv->viu.osd1_blk0_cfg[0] |= OSD_OUTPUT_COLOR_RGB;
>  
> +	if (priv->viu.osd1_afbcd &&
> +	    meson_vpu_is_compatible(priv, VPU_COMPATIBLE_G12A)) {
> +		priv->viu.osd1_blk0_cfg[0] |= OSD_MALI_SRC_EN |
> +			priv->afbcd.ops->fmt_to_blk_mode(fb->modifier,
> +							  fb->format->format);
> +	} else {
> +		switch (fb->format->format) {
> +		case DRM_FORMAT_XRGB8888:
> +		case DRM_FORMAT_ARGB8888:
> +			priv->viu.osd1_blk0_cfg[0] |= OSD_BLK_MODE_32 |
> +						OSD_COLOR_MATRIX_32_ARGB;
> +			break;
> +		case DRM_FORMAT_XBGR8888:
> +		case DRM_FORMAT_ABGR8888:
> +			priv->viu.osd1_blk0_cfg[0] |= OSD_BLK_MODE_32 |
> +						OSD_COLOR_MATRIX_32_ABGR;
> +			break;
> +		case DRM_FORMAT_RGB888:
> +			priv->viu.osd1_blk0_cfg[0] |= OSD_BLK_MODE_24 |
> +						OSD_COLOR_MATRIX_24_RGB;
> +			break;
> +		case DRM_FORMAT_RGB565:
> +			priv->viu.osd1_blk0_cfg[0] |= OSD_BLK_MODE_16 |
> +						OSD_COLOR_MATRIX_16_RGB565;
> +			break;
> +		};
> +	}
> +
>  	switch (fb->format->format) {
>  	case DRM_FORMAT_XRGB8888:
> -		/* For XRGB, replace the pixel's alpha by 0xFF */
> -		writel_bits_relaxed(OSD_REPLACE_EN, OSD_REPLACE_EN,
> -				    priv->io_base + _REG(VIU_OSD1_CTRL_STAT2));
> -		priv->viu.osd1_blk0_cfg[0] |= OSD_BLK_MODE_32 |
> -					      OSD_COLOR_MATRIX_32_ARGB;
> -		break;
>  	case DRM_FORMAT_XBGR8888:
>  		/* For XRGB, replace the pixel's alpha by 0xFF */
> -		writel_bits_relaxed(OSD_REPLACE_EN, OSD_REPLACE_EN,
> -				    priv->io_base + _REG(VIU_OSD1_CTRL_STAT2));
> -		priv->viu.osd1_blk0_cfg[0] |= OSD_BLK_MODE_32 |
> -					      OSD_COLOR_MATRIX_32_ABGR;
> +		priv->viu.osd1_ctrl_stat2 |= OSD_REPLACE_EN;
>  		break;
>  	case DRM_FORMAT_ARGB8888:
> -		/* For ARGB, use the pixel's alpha */
> -		writel_bits_relaxed(OSD_REPLACE_EN, 0,
> -				    priv->io_base + _REG(VIU_OSD1_CTRL_STAT2));
> -		priv->viu.osd1_blk0_cfg[0] |= OSD_BLK_MODE_32 |
> -					      OSD_COLOR_MATRIX_32_ARGB;
> -		break;
>  	case DRM_FORMAT_ABGR8888:
>  		/* For ARGB, use the pixel's alpha */
> -		writel_bits_relaxed(OSD_REPLACE_EN, 0,
> -				    priv->io_base + _REG(VIU_OSD1_CTRL_STAT2));
> -		priv->viu.osd1_blk0_cfg[0] |= OSD_BLK_MODE_32 |
> -					      OSD_COLOR_MATRIX_32_ABGR;
> -		break;
> -	case DRM_FORMAT_RGB888:
> -		priv->viu.osd1_blk0_cfg[0] |= OSD_BLK_MODE_24 |
> -					      OSD_COLOR_MATRIX_24_RGB;
> -		break;
> -	case DRM_FORMAT_RGB565:
> -		priv->viu.osd1_blk0_cfg[0] |= OSD_BLK_MODE_16 |
> -					      OSD_COLOR_MATRIX_16_RGB565;
> +		priv->viu.osd1_ctrl_stat2 &= ~OSD_REPLACE_EN;
>  		break;
>  	};
>  
> @@ -307,6 +365,16 @@ static void meson_plane_atomic_update(struct drm_plane *plane,
>  	priv->viu.osd1_height = fb->height;
>  	priv->viu.osd1_width = fb->width;
>  
> +	if (priv->viu.osd1_afbcd) {
> +		priv->afbcd.modifier = fb->modifier;
> +		priv->afbcd.format = fb->format->format;
> +
> +		/* Calculate decoder write stride */
> +		if (meson_vpu_is_compatible(priv, VPU_COMPATIBLE_G12A))
> +			priv->viu.osd1_blk2_cfg4 =
> +				meson_g12a_afbcd_line_stride(priv);
> +	}
> +
>  	if (!meson_plane->enabled) {
>  		/* Reset OSD1 before enabling it on GXL+ SoCs */
>  		if (meson_vpu_is_compatible(priv, VPU_COMPATIBLE_GXM) ||
> @@ -346,6 +414,42 @@ static const struct drm_plane_helper_funcs meson_plane_helper_funcs = {
>  	.prepare_fb	= drm_gem_fb_prepare_fb,
>  };
>  
> +static bool meson_plane_format_mod_supported(struct drm_plane *plane,
> +					     u32 format, u64 modifier)
> +{
> +	struct meson_plane *meson_plane = to_meson_plane(plane);
> +	struct meson_drm *priv = meson_plane->priv;
> +	int i;
> +
> +	if (modifier == DRM_FORMAT_MOD_INVALID)
> +		return false;
> +
> +	if (modifier == DRM_FORMAT_MOD_LINEAR)
> +		return true;
> +
> +	if (!meson_vpu_is_compatible(priv, VPU_COMPATIBLE_GXM) &&
> +	    !meson_vpu_is_compatible(priv, VPU_COMPATIBLE_G12A))
> +		return false;
> +
> +	if (modifier & ~DRM_FORMAT_MOD_ARM_AFBC(MESON_MOD_AFBC_VALID_BITS))
> +		return false;
> +
> +	for (i = 0 ; i < plane->modifier_count ; ++i)
> +		if (plane->modifiers[i] == modifier)
> +			break;
> +
> +	if (i == plane->modifier_count) {
> +		DRM_DEBUG_KMS("Unsupported modifier\n");
> +		return false;
> +	}
> +
> +	if (priv->afbcd.ops && priv->afbcd.ops->supported_fmt)
> +		return priv->afbcd.ops->supported_fmt(modifier, format);
> +
> +	DRM_DEBUG_KMS("AFBC Unsupported\n");
> +	return false;
> +}
> +
>  static const struct drm_plane_funcs meson_plane_funcs = {
>  	.update_plane		= drm_atomic_helper_update_plane,
>  	.disable_plane		= drm_atomic_helper_disable_plane,
> @@ -353,6 +457,7 @@ static const struct drm_plane_funcs meson_plane_funcs = {
>  	.reset			= drm_atomic_helper_plane_reset,
>  	.atomic_duplicate_state = drm_atomic_helper_plane_duplicate_state,
>  	.atomic_destroy_state	= drm_atomic_helper_plane_destroy_state,
> +	.format_mod_supported   = meson_plane_format_mod_supported,
>  };
>  
>  static const uint32_t supported_drm_formats[] = {
> @@ -364,10 +469,53 @@ static const uint32_t supported_drm_formats[] = {
>  	DRM_FORMAT_RGB565,
>  };
>  
> +static const uint64_t format_modifiers_afbc_gxm[] = {
> +	DRM_FORMAT_MOD_ARM_AFBC(AFBC_FORMAT_MOD_BLOCK_SIZE_16x16 |
> +				AFBC_FORMAT_MOD_SPARSE |
> +				AFBC_FORMAT_MOD_YTR),
> +	/* SPLIT mandates SPARSE, RGB modes mandates YTR */
> +	DRM_FORMAT_MOD_ARM_AFBC(AFBC_FORMAT_MOD_BLOCK_SIZE_16x16 |
> +				AFBC_FORMAT_MOD_YTR |
> +				AFBC_FORMAT_MOD_SPARSE |
> +				AFBC_FORMAT_MOD_SPLIT),
> +	DRM_FORMAT_MOD_LINEAR,
> +	DRM_FORMAT_MOD_INVALID,
> +};
> +
> +static const uint64_t format_modifiers_afbc_g12a[] = {
> +	/*
> +	 * - TOFIX Support AFBC modifiers for YUV formats (16x16 + TILED)
> +	 * - AFBC_FORMAT_MOD_YTR is mandatory since we only support RGB
> +	 * - SPLIT is mandatory for performances reasons when in 16x16
> +	 *   block size
> +	 * - 32x8 block size + SPLIT is mandatory with 4K frame size
> +	 *   for performances reasons
> +	 */
> +	DRM_FORMAT_MOD_ARM_AFBC(AFBC_FORMAT_MOD_BLOCK_SIZE_16x16 |
> +				AFBC_FORMAT_MOD_YTR |
> +				AFBC_FORMAT_MOD_SPARSE |
> +				AFBC_FORMAT_MOD_SPLIT),
> +	DRM_FORMAT_MOD_ARM_AFBC(AFBC_FORMAT_MOD_BLOCK_SIZE_32x8 |
> +				AFBC_FORMAT_MOD_YTR |
> +				AFBC_FORMAT_MOD_SPARSE),
> +	DRM_FORMAT_MOD_ARM_AFBC(AFBC_FORMAT_MOD_BLOCK_SIZE_32x8 |
> +				AFBC_FORMAT_MOD_YTR |
> +				AFBC_FORMAT_MOD_SPARSE |
> +				AFBC_FORMAT_MOD_SPLIT),
> +	DRM_FORMAT_MOD_LINEAR,
> +	DRM_FORMAT_MOD_INVALID,
> +};
> +
> +static const uint64_t format_modifiers_default[] = {
> +	DRM_FORMAT_MOD_LINEAR,
> +	DRM_FORMAT_MOD_INVALID,
> +};
> +
>  int meson_plane_create(struct meson_drm *priv)
>  {
>  	struct meson_plane *meson_plane;
>  	struct drm_plane *plane;
> +	const uint64_t *format_modifiers = format_modifiers_default;
>  
>  	meson_plane = devm_kzalloc(priv->drm->dev, sizeof(*meson_plane),
>  				   GFP_KERNEL);
> @@ -377,11 +525,16 @@ int meson_plane_create(struct meson_drm *priv)
>  	meson_plane->priv = priv;
>  	plane = &meson_plane->base;
>  
> +	if (meson_vpu_is_compatible(priv, VPU_COMPATIBLE_GXM))
> +		format_modifiers = format_modifiers_afbc_gxm;
> +	else if (meson_vpu_is_compatible(priv, VPU_COMPATIBLE_G12A))
> +		format_modifiers = format_modifiers_afbc_g12a;
> +
>  	drm_universal_plane_init(priv->drm, plane, 0xFF,
>  				 &meson_plane_funcs,
>  				 supported_drm_formats,
>  				 ARRAY_SIZE(supported_drm_formats),
> -				 NULL,
> +				 format_modifiers,
>  				 DRM_PLANE_TYPE_PRIMARY, "meson_primary_plane");
>  
>  	drm_plane_helper_add(plane, &meson_plane_helper_funcs);
> -- 
> 2.22.0

_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

  reply	other threads:[~2019-10-10 13:26 UTC|newest]

Thread overview: 22+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-10-10  9:25 [PATCH 0/7] drm/meson: add AFBC support Neil Armstrong
2019-10-10  9:25 ` [PATCH 1/7] drm/meson: add AFBC decoder registers for GXM and G12A Neil Armstrong
2019-10-10  9:25 ` [PATCH 2/7] drm/meson: store the framebuffer width for plane commit Neil Armstrong
2019-10-10  9:25 ` [PATCH 3/7] drm/meson: Add AFBCD module driver Neil Armstrong
2019-10-10  9:25 ` [PATCH 4/7] drm/meson: plane: add support for AFBC mode for OSD1 plane Neil Armstrong
2019-10-10 13:26   ` Ayan Halder [this message]
2019-10-10 13:41     ` Neil Armstrong
2019-10-10 17:31       ` Ayan Halder
2019-10-11  7:46         ` Daniel Vetter
2019-10-11  7:56           ` Daniel Stone
2019-10-11  8:41       ` Brian Starkey
2019-10-11  9:14         ` Neil Armstrong
2019-10-11 10:56           ` Brian Starkey
2019-10-11 12:07             ` Neil Armstrong
2019-10-15 11:18               ` Brian Starkey
2019-10-15 11:46                 ` Neil Armstrong
2019-10-11 17:25             ` Daniel Vetter
2019-10-14  9:11               ` Brian Starkey
2019-10-14  9:20                 ` Daniel Vetter
2019-10-10  9:25 ` [PATCH 5/7] drm/meson: viu: add AFBC modules routing functions Neil Armstrong
2019-10-10  9:25 ` [PATCH 6/7] drm/meson: hold 32 lines after vsync to give time for AFBC start Neil Armstrong
2019-10-10  9:25 ` [PATCH 7/7] drm/meson: crtc: add OSD1 plane AFBC commit Neil Armstrong

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191010132601.GA10110@arm.com \
    --to=ayan.halder@arm.com \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=khilman@baylibre.com \
    --cc=linux-amlogic@lists.infradead.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=narmstrong@baylibre.com \
    --cc=nd@arm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).