From: Christian Hewitt <christianshewitt@gmail.com>
To: u-boot@lists.denx.de, u-boot-amlogic@groups.io,
linux-amlogic@lists.infradead.org
Subject: [PATCH 07/13] docs: boards: amlogic: add documentation for BananaPi M2S
Date: Thu, 23 Mar 2023 06:54:52 +0000 [thread overview]
Message-ID: <20230323065458.776029-8-christianshewitt@gmail.com> (raw)
In-Reply-To: <20230323065458.776029-1-christianshewitt@gmail.com>
Add build docs for the BPI-M2S board.
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
---
board/amlogic/w400/MAINTAINERS | 2 +
doc/board/amlogic/bananapi-m2s.rst | 152 +++++++++++++++++++++++++++++
doc/board/amlogic/index.rst | 1 +
3 files changed, 155 insertions(+)
create mode 100644 doc/board/amlogic/bananapi-m2s.rst
diff --git a/board/amlogic/w400/MAINTAINERS b/board/amlogic/w400/MAINTAINERS
index 26a4c2c587..042b523056 100644
--- a/board/amlogic/w400/MAINTAINERS
+++ b/board/amlogic/w400/MAINTAINERS
@@ -4,5 +4,7 @@ S: Maintained
L: u-boot-amlogic@groups.io
F: board/amlogic/w400/
F: configs/bananapi-cm4-cm4io_defconfig
+F: configs/bananapi-m2s_defconfig
F: doc/board/amlogic/w400.rst
F: doc/board/amlogic/bananapi-cm4io.rst
+F: doc/board/amlogic/bananapi-m2s.rst
diff --git a/doc/board/amlogic/bananapi-m2s.rst b/doc/board/amlogic/bananapi-m2s.rst
new file mode 100644
index 0000000000..265df1aea7
--- /dev/null
+++ b/doc/board/amlogic/bananapi-m2s.rst
@@ -0,0 +1,152 @@
+.. SPDX-License-Identifier: GPL-2.0+
+
+U-Boot for BananaPi M2S (A311D & S922X)
+=======================================
+
+BananaPi BPI-M2S ships is a Single Board Computer manufactured by Sinovoip that ships in
+two variants with Amlogic S922X or A311D SoC and the following common specification:
+
+- 16GB eMMC
+- HDMI 2.1a video
+- 2x 10/100/1000 Base-T Ethernet (1x RTL8211F, 1x RTL811H)
+- 2x USB 2.0 ports
+- 2x Status LED's (green/blue)
+- 1x Power/Reset button
+- 1x micro SD card slot
+- 40-pin GPIO header
+- PWM fan header
+- UART header
+
+The S992X variant has:
+- 2GB LPDDR4 RAM
+
+The A311D variant has:
+
+- 4GB LPDDR4 RAM
+- NPU (5.0 TOPS)
+- MIPI DSI header
+- MIPI CSI header
+
+An optional RTL8822CS SDIO WiFi/BT mezzanine is available for both board variants.
+
+Schematics are available from the manufacturer: https://wiki.banana-pi.org/Banana_Pi_BPI-M2S
+
+U-Boot Compilation
+------------------
+
+.. code-block:: bash
+
+ $ export CROSS_COMPILE=aarch64-none-elf-
+ $ make bananapi-m2s_defconfig
+ $ make
+
+U-Boot Signing with Pre-Built FIP repo
+--------------------------------------
+
+.. code-block:: bash
+ $ git clone https://github.com/LibreELEC/amlogic-boot-fip --depth=1
+ $ cd amlogic-boot-fip
+ $ mkdir my-output-dir
+ $ ./build-fip.sh bananapi-m2s /path/to/u-boot/u-boot.bin my-output-dir
+
+U-Boot Manual Signing
+---------------------
+
+Amlogic does not provide sources for the firmware and tools needed to create a bootloader
+image so it is necessary to obtain binaries from sources published by the board vendor:
+
+.. code-block:: bash
+
+ $ wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz
+ $ wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz
+ $ tar xvfJ gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz
+ $ tar xvfJ gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz
+ $ export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH
+
+ $ DIR=bananapi-m2s
+ $ git clone --depth 1 https://github.com/Dangku/amlogic-u-boot.git -b khadas-g12b-v2015.01-m2s $DIR
+
+ $ cd $DIR
+ $ make bananapi_m2s_defconfig
+ $ make
+ $ export UBDIR=$PWD
+
+Go back to the mainline U-Boot source tree then:
+
+.. code-block:: bash
+
+ $ mkdir fip
+
+ $ wget https://github.com/BayLibre/u-boot/releases/download/v2017.11-libretech-cc/blx_fix_g12a.sh -O fip/blx_fix.sh
+ $ cp $UBDIR/build/scp_task/bl301.bin fip/
+ $ cp $UBDIR/build/board/bananapi/bananpi_m2s/firmware/acs.bin fip/
+ $ cp $UBDIR/fip/g12a/bl2.bin fip/
+ $ cp $UBDIR/fip/g12a/bl30.bin fip/
+ $ cp $UBDIR/fip/g12a/bl31.img fip/
+ $ cp $UBDIR/fip/g12a/ddr3_1d.fw fip/
+ $ cp $UBDIR/fip/g12a/ddr4_1d.fw fip/
+ $ cp $UBDIR/fip/g12a/ddr4_2d.fw fip/
+ $ cp $UBDIR/fip/g12a/diag_lpddr4.fw fip/
+ $ cp $UBDIR/fip/g12a/lpddr3_1d.fw fip/
+ $ cp $UBDIR/fip/g12a/lpddr4_1d.fw fip/
+ $ cp $UBDIR/fip/g12a/lpddr4_2d.fw fip/
+ $ cp $UBDIR/fip/g12a/piei.fw fip/
+ $ cp $UBDIR/fip/g12a/aml_ddr.fw fip/
+ $ cp u-boot.bin fip/bl33.bin
+
+ $ sh fip/blx_fix.sh \
+ fip/bl30.bin \
+ fip/zero_tmp \
+ fip/bl30_zero.bin \
+ fip/bl301.bin \
+ fip/bl301_zero.bin \
+ fip/bl30_new.bin \
+ bl30
+
+ $ sh fip/blx_fix.sh \
+ fip/bl2.bin \
+ fip/zero_tmp \
+ fip/bl2_zero.bin \
+ fip/acs.bin \
+ fip/bl21_zero.bin \
+ fip/bl2_new.bin \
+ bl2
+
+ $ $UBDIR/fip/g12b/aml_encrypt_g12b --bl30sig --input fip/bl30_new.bin \
+ --output fip/bl30_new.bin.g12a.enc \
+ --level v3
+ $ $UBDIR/fip/g12b/aml_encrypt_g12b --bl3sig --input fip/bl30_new.bin.g12a.enc \
+ --output fip/bl30_new.bin.enc \
+ --level v3 --type bl30
+ $ $UBDIR/fip/g12b/aml_encrypt_g12b --bl3sig --input fip/bl31.img \
+ --output fip/bl31.img.enc \
+ --level v3 --type bl31
+ $ $UBDIR/fip/g12b/aml_encrypt_g12b --bl3sig --input fip/bl33.bin --compress lz4 \
+ --output fip/bl33.bin.enc \
+ --level v3 --type bl33 --compress lz4
+ $ $UBDIR/fip/g12b/aml_encrypt_g12b --bl2sig --input fip/bl2_new.bin \
+ --output fip/bl2.n.bin.sig
+ $ $UBDIR/fip/g12b/aml_encrypt_g12b --bootmk \
+ --output fip/u-boot.bin \
+ --bl2 fip/bl2.n.bin.sig \
+ --bl30 fip/bl30_new.bin.enc \
+ --bl31 fip/bl31.img.enc \
+ --bl33 fip/bl33.bin.enc \
+ --ddrfw1 fip/ddr4_1d.fw \
+ --ddrfw2 fip/ddr4_2d.fw \
+ --ddrfw3 fip/ddr3_1d.fw \
+ --ddrfw4 fip/piei.fw \
+ --ddrfw5 fip/lpddr4_1d.fw \
+ --ddrfw6 fip/lpddr4_2d.fw \
+ --ddrfw7 fip/diag_lpddr4.fw \
+ --ddrfw8 fip/aml_ddr.fw \
+ --ddrfw9 fip/lpddr3_1d.fw \
+ --level v3
+
+Then write the image to SD or eMMC with:
+
+.. code-block:: bash
+
+ $ DEV=/dev/boot_device
+ $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1
+ $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=440
diff --git a/doc/board/amlogic/index.rst b/doc/board/amlogic/index.rst
index 8388acdd11..fa1b362731 100644
--- a/doc/board/amlogic/index.rst
+++ b/doc/board/amlogic/index.rst
@@ -87,6 +87,7 @@ Board Documentation
bananapi-cm4io
bananapi-m2pro
+ bananapi-m2s
bananapi-m5
beelink-gskingx
beelink-gtking
--
2.34.1
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
next prev parent reply other threads:[~2023-03-23 6:55 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-03-23 6:54 [PATCH 00/13] boards: amlogic: add BananaPi/Radxa/WeTek boards Christian Hewitt
2023-03-23 6:54 ` [PATCH 01/13] docs: boards: amlogic: add bananapi-m5 to u200 maintainer file Christian Hewitt
2023-03-23 8:48 ` Neil Armstrong
2023-03-23 6:54 ` [PATCH 02/13] ARM: dts: add support for BananaPi M2-Pro Christian Hewitt
2023-03-23 8:50 ` Neil Armstrong
2023-03-23 6:54 ` [PATCH 03/13] boards: add BananaPi M2-Pro defconfig Christian Hewitt
2023-03-23 8:50 ` Neil Armstrong
2023-03-23 6:54 ` [PATCH 04/13] docs: boards: amlogic: add documentation for BananaPi M2-Pro Christian Hewitt
2023-03-23 8:50 ` Neil Armstrong
2023-03-23 6:54 ` [PATCH 05/13] ARM: dts: add support for BananaPi M2S Christian Hewitt
2023-03-23 8:50 ` Neil Armstrong
2023-03-23 6:54 ` [PATCH 06/13] boards: add BananaPi M2S defconfig Christian Hewitt
2023-03-23 8:51 ` Neil Armstrong
2023-03-23 6:54 ` Christian Hewitt [this message]
2023-03-23 6:54 ` [PATCH 08/13] ARM: dts: add support for Radxa Zero2 Christian Hewitt
2023-03-23 8:51 ` Neil Armstrong
2023-03-23 6:54 ` [PATCH 09/13] boards: amlogic: add Radxa Zero2 defconfig Christian Hewitt
2023-03-23 8:51 ` Neil Armstrong
2023-03-23 6:54 ` [PATCH 10/13] doc: boards: amlogic: add documentation for Radxa Zero2 Christian Hewitt
2023-03-23 6:54 ` [PATCH 11/13] ARM: dts: add support for WeTek Hub and WeTek Play2 Christian Hewitt
2023-03-23 8:51 ` Neil Armstrong
2023-03-23 6:54 ` [PATCH 12/13] boards: amlogic: add WeTek Hub and WeTek Play2 defconfig Christian Hewitt
2023-03-23 6:54 ` [PATCH 13/13] doc: boards: amlogic: add documentation for WeTek Hub and WeTek Play2 Christian Hewitt
[not found] ` <174EF9F0421CB2CD.22739@groups.io>
2023-03-23 7:04 ` [PATCH 12/13] boards: amlogic: add WeTek Hub and WeTek Play2 defconfig Christian Hewitt
2023-03-23 8:52 ` Neil Armstrong
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230323065458.776029-8-christianshewitt@gmail.com \
--to=christianshewitt@gmail.com \
--cc=linux-amlogic@lists.infradead.org \
--cc=u-boot-amlogic@groups.io \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).