Re: [PATCH] fix green/pink color distortion from HDR set during vendor Uboot

[Neil Armstrong <narmstrong@baylibre.com>]

Hi Mathias,

So you think you'll be able to send a v2 patch ?

Thanks,
Neil

On 20/04/2021 15:01, Neil Armstrong wrote:
> On 19/04/2021 16:50, Neil Armstrong wrote:
>> Hi,
>>
>> Thanks for looking at this !
>>
>> The subject should be :
>> "drm/meson: fix green/pink color distortion from HDR set during vendor Uboot"
>>
>> On 19/04/2021 16:33, Mathias Steiger wrote:
>>>
>>> I also wrote a program to set this via /dev/mem from user space: https://github.com/ballerburg9005/android-tvbox-2-linux-pc-and-server/blob/main/fix_greenpink.c .
>>>
>>>
>>
>> Please explicit here what the patch does, no need for the example program, the patch is self explicit.
>>
>> Then add:
>>
>> Fixes: 728883948b0d ("drm/meson: Add G12A Support for VIU setup")
> 
> I tested on a VIM3 with the vendor U-boot, and it works ! Thanks !
> 
> And please add to the v2 patch:
> Tested-by: Neil Armstrong <narmstrong@baylibre.com>
> 
> Thanks,
> Neil
> 
>>
>> Finally, it also needs your sign-off at the end of your commit message, simply commit with "-s".
>>
>>
>>>
>>> diff --git a/drivers/gpu/drm/meson/meson_drv.c b/drivers/gpu/drm/meson/meson_drv.c
>>> index 453d8b4c5..7d929b5b2 100644
>>> --- a/drivers/gpu/drm/meson/meson_drv.c
>>> +++ b/drivers/gpu/drm/meson/meson_drv.c
>>> @@ -308,6 +308,10 @@ static int meson_drv_bind_master(struct device *dev, bool has_components)
>>>         drm->mode_config.funcs = &meson_mode_config_funcs;
>>>         drm->mode_config.helper_private = &meson_mode_config_helpers;
>>>
>>> +       /* undo settings made in vendor Uboot */
>>> +
>>> +       writel_bits_relaxed(15 << 13, 0, priv->io_base + _REG(OSD1_HDR2_CTRL)); // fixes green/pink color distortion - reg_only_mat must be 0
>>> +
>>
>> This should go in meson_viu.c in meson_viu_init right after meson_viu_set_g12a_osd1_matrix() for
>> VPU_COMPATIBLE_G12A (extend the else if case).
>>
>> Please document the bits your write in meson_registers.h like:
>> #define OSD1_HDR2_CTRL_VDIN0_HDR2_TOP_EN 	BIT(13)
>>
>> and same for bits mat_o_en and reg_out_fmt, then use them in writel_bits_relaxed()
>>
>>>         /* Hardware Initialization */
>>>
>>>         meson_vpu_init(priv);
>>> diff --git a/drivers/gpu/drm/meson/meson_registers.h b/drivers/gpu/drm/meson/meson_registers.h
>>> index 446e7961d..91351f9a3 100644
>>> --- a/drivers/gpu/drm/meson/meson_registers.h
>>> +++ b/drivers/gpu/drm/meson/meson_registers.h
>>> @@ -634,6 +634,9 @@
>>>  #define VPP_WRAP_OSD3_MATRIX_PRE_OFFSET2 0x3dbc
>>>  #define VPP_WRAP_OSD3_MATRIX_EN_CTRL 0x3dbd
>>>
>>> +/* osd1 HDR */
>>> +#define OSD1_HDR2_CTRL 0x38a0
>>> +
>>>  /* osd2 scaler */
>>>  #define OSD2_VSC_PHASE_STEP 0x3d00
>>>  #define OSD2_VSC_INI_PHASE 0x3d01
>>>
>>
>> This part will be ok with the bits defined.
>>
>>>
>>> _______________________________________________
>>> linux-amlogic mailing list
>>> linux-amlogic@lists.infradead.org
>>> http://lists.infradead.org/mailman/listinfo/linux-amlogic
>>
>> Neil
>>
> 


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic