From: bigeasy@linutronix.de (Sebastian Andrzej Siewior)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 03/18] tty: serial: 8250_core: allow to set ->throttle / ->unthrottle callbacks
Date: Fri, 5 Sep 2014 21:02:38 +0200 [thread overview]
Message-ID: <1409943773-7874-4-git-send-email-bigeasy@linutronix.de> (raw)
In-Reply-To: <1409943773-7874-1-git-send-email-bigeasy@linutronix.de>
The OMAP UART provides support for HW assisted flow control. What is
missing is the support to throttle / unthrottle callbacks which are used
by the omap-serial driver at the moment.
This patch adds the callbacks. It should be safe to add them since they
are only invoked from the serial_core (uart_throttle()) if the feature
flags are set.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
---
drivers/tty/serial/8250/8250_core.c | 14 ++++++++++++++
include/linux/serial_core.h | 2 ++
2 files changed, 16 insertions(+)
diff --git a/drivers/tty/serial/8250/8250_core.c b/drivers/tty/serial/8250/8250_core.c
index 54fd42f0e6f0..e2703e8d4b87 100644
--- a/drivers/tty/serial/8250/8250_core.c
+++ b/drivers/tty/serial/8250/8250_core.c
@@ -1318,6 +1318,16 @@ static void serial8250_start_tx(struct uart_port *port)
}
}
+static void serial8250_throttle(struct uart_port *port)
+{
+ port->throttle(port);
+}
+
+static void serial8250_unthrottle(struct uart_port *port)
+{
+ port->unthrottle(port);
+}
+
static void serial8250_stop_rx(struct uart_port *port)
{
struct uart_8250_port *up = up_to_u8250p(port);
@@ -2876,6 +2886,8 @@ static struct uart_ops serial8250_pops = {
.get_mctrl = serial8250_get_mctrl,
.stop_tx = serial8250_stop_tx,
.start_tx = serial8250_start_tx,
+ .throttle = serial8250_throttle,
+ .unthrottle = serial8250_unthrottle,
.stop_rx = serial8250_stop_rx,
.enable_ms = serial8250_enable_ms,
.break_ctl = serial8250_break_ctl,
@@ -3423,6 +3435,8 @@ int serial8250_register_8250_port(struct uart_8250_port *up)
uart->port.fifosize = up->port.fifosize;
uart->tx_loadsz = up->tx_loadsz;
uart->capabilities = up->capabilities;
+ uart->port.throttle = up->port.throttle;
+ uart->port.unthrottle = up->port.unthrottle;
/* Take tx_loadsz from fifosize if it wasn't set separately */
if (uart->port.fifosize && !uart->tx_loadsz)
diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h
index f3ea5312d89f..edaaaa036c0b 100644
--- a/include/linux/serial_core.h
+++ b/include/linux/serial_core.h
@@ -124,6 +124,8 @@ struct uart_port {
struct ktermios *old);
int (*startup)(struct uart_port *port);
void (*shutdown)(struct uart_port *port);
+ void (*throttle)(struct uart_port *port);
+ void (*unthrottle)(struct uart_port *port);
int (*handle_irq)(struct uart_port *);
void (*pm)(struct uart_port *, unsigned int state,
unsigned int old);
--
2.1.0
next prev parent reply other threads:[~2014-09-05 19:02 UTC|newest]
Thread overview: 35+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-09-05 19:02 [PATCH v8 00/18] 8250-core based serial driver for OMAP + DMA Sebastian Andrzej Siewior
2014-09-05 19:02 ` [PATCH 01/18] tty: serial: 8250_core: provide a function to export uart_8250_port Sebastian Andrzej Siewior
2014-09-05 19:02 ` [PATCH 02/18] tty: serial: 8250_core: allow to overwrite & export serial8250_startup() Sebastian Andrzej Siewior
2014-09-05 19:02 ` Sebastian Andrzej Siewior [this message]
2014-09-08 23:33 ` [PATCH 03/18] tty: serial: 8250_core: allow to set ->throttle / ->unthrottle callbacks Greg Kroah-Hartman
2014-09-09 0:41 ` Tony Lindgren
2014-09-05 19:02 ` [PATCH 04/18] tty: serial: 8250_core: add run time pm Sebastian Andrzej Siewior
2014-09-05 19:02 ` [PATCH 05/18] tty: serial: 8250_core: read only RX if there is something in the FIFO Sebastian Andrzej Siewior
2014-09-05 19:02 ` [PATCH 06/18] tty: serial: 8250_core: user the ->line argument as a hint in serial8250_find_match_or_unused() Sebastian Andrzej Siewior
2014-09-05 19:02 ` [PATCH 07/18] tty: serial: 8250_core: remove UART_IER_RDI in serial8250_stop_rx() Sebastian Andrzej Siewior
2014-09-05 19:02 ` [PATCH 08/18] tty: serial: Add 8250-core based omap driver Sebastian Andrzej Siewior
2014-09-08 16:39 ` Tony Lindgren
2014-09-05 19:02 ` [PATCH 09/18] tty: serial: 8250_dma: handle error on TX submit Sebastian Andrzej Siewior
2014-09-05 19:02 ` [PATCH 10/18] tty: serial: 8250_dma: enqueue RX dma again on completion Sebastian Andrzej Siewior
2014-09-05 19:02 ` [PATCH 11/18] tty: serial: 8250_dma: Add a TX trigger workaround for AM33xx Sebastian Andrzej Siewior
2014-09-08 16:41 ` Tony Lindgren
2014-09-08 16:45 ` Sebastian Andrzej Siewior
2014-09-05 19:02 ` [PATCH 12/18] tty: serial: 8250_dma: optimize the xmit path due to UART_BUG_DMA_TX Sebastian Andrzej Siewior
2014-09-05 19:02 ` [PATCH 13/18] tty: serial: 8250_dma: keep own book keeping about RX transfers Sebastian Andrzej Siewior
2014-09-05 19:02 ` [PATCH 14/18] tty: serial: 8250_dma: handle the when UART response while DMA remains idle Sebastian Andrzej Siewior
2014-09-05 19:02 ` [PATCH 15/18] tty: serial: 8250_dma: add pm runtime Sebastian Andrzej Siewior
2014-09-05 19:02 ` [PATCH 16/18] arm: dts: am33xx: add DMA properties for UART Sebastian Andrzej Siewior
2014-09-05 19:02 ` [PATCH 17/18] arm: dts: dra7: " Sebastian Andrzej Siewior
2014-09-05 19:02 ` [PATCH 18/18] tty: serial: 8250: omap: add dma support Sebastian Andrzej Siewior
2014-09-08 14:46 ` [PATCH v8 00/18] 8250-core based serial driver for OMAP + DMA Frans Klaver
2014-09-08 15:15 ` Sebastian Andrzej Siewior
2014-09-08 16:33 ` Sebastian Andrzej Siewior
2014-09-08 18:25 ` Frans Klaver
2014-09-08 18:33 ` Frans Klaver
2014-09-09 19:41 ` Sebastian Andrzej Siewior
2014-09-10 14:15 ` Frans Klaver
2014-09-10 16:56 ` Sebastian Andrzej Siewior
2014-09-08 17:40 ` Tony Lindgren
2014-09-08 17:55 ` Tony Lindgren
2014-09-09 7:33 ` Sebastian Andrzej Siewior
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1409943773-7874-4-git-send-email-bigeasy@linutronix.de \
--to=bigeasy@linutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).