From: sboyd@codeaurora.org (Stephen Boyd)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 09/15] clk: qcom: Add MSM8960/APQ8064's HFPLLs
Date: Fri, 5 Sep 2014 15:47:29 -0700 [thread overview]
Message-ID: <1409957256-23729-11-git-send-email-sboyd@codeaurora.org> (raw)
In-Reply-To: <1409957256-23729-1-git-send-email-sboyd@codeaurora.org>
Describe the HFPLLs present on MSM8960 and APQ8064 devices.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
---
drivers/clk/qcom/gcc-msm8960.c | 172 +++++++++++++++++++++++++++
include/dt-bindings/clock/qcom,gcc-msm8960.h | 2 +
2 files changed, 174 insertions(+)
diff --git a/drivers/clk/qcom/gcc-msm8960.c b/drivers/clk/qcom/gcc-msm8960.c
index 007534f7a2d7..e60327baf5db 100644
--- a/drivers/clk/qcom/gcc-msm8960.c
+++ b/drivers/clk/qcom/gcc-msm8960.c
@@ -30,6 +30,7 @@
#include "clk-pll.h"
#include "clk-rcg.h"
#include "clk-branch.h"
+#include "clk-hfpll.h"
#include "reset.h"
static struct clk_pll pll3 = {
@@ -75,6 +76,164 @@ static struct clk_regmap pll8_vote = {
},
};
+static struct hfpll_data hfpll0_data = {
+ .mode_reg = 0x3200,
+ .l_reg = 0x3208,
+ .m_reg = 0x320c,
+ .n_reg = 0x3210,
+ .config_reg = 0x3204,
+ .status_reg = 0x321c,
+ .config_val = 0x7845c665,
+ .droop_reg = 0x3214,
+ .droop_val = 0x0108c000,
+ .min_rate = 600000000UL,
+ .max_rate = 1800000000UL,
+};
+
+static struct clk_hfpll hfpll0 = {
+ .d = &hfpll0_data,
+ .clkr.hw.init = &(struct clk_init_data){
+ .parent_names = (const char *[]){ "pxo" },
+ .num_parents = 1,
+ .name = "hfpll0",
+ .ops = &clk_ops_hfpll,
+ .flags = CLK_IGNORE_UNUSED,
+ },
+ .lock = __SPIN_LOCK_UNLOCKED(hfpll0.lock),
+};
+
+static struct hfpll_data hfpll1_8064_data = {
+ .mode_reg = 0x3240,
+ .l_reg = 0x3248,
+ .m_reg = 0x324c,
+ .n_reg = 0x3250,
+ .config_reg = 0x3244,
+ .status_reg = 0x325c,
+ .config_val = 0x7845c665,
+ .droop_reg = 0x3254,
+ .droop_val = 0x0108c000,
+ .min_rate = 600000000UL,
+ .max_rate = 1800000000UL,
+};
+
+static struct hfpll_data hfpll1_data = {
+ .mode_reg = 0x3300,
+ .l_reg = 0x3308,
+ .m_reg = 0x330c,
+ .n_reg = 0x3310,
+ .config_reg = 0x3304,
+ .status_reg = 0x331c,
+ .config_val = 0x7845c665,
+ .droop_reg = 0x3314,
+ .droop_val = 0x0108c000,
+ .min_rate = 600000000UL,
+ .max_rate = 1800000000UL,
+};
+
+static struct clk_hfpll hfpll1 = {
+ .d = &hfpll1_data,
+ .clkr.hw.init = &(struct clk_init_data){
+ .parent_names = (const char *[]){ "pxo" },
+ .num_parents = 1,
+ .name = "hfpll1",
+ .ops = &clk_ops_hfpll,
+ .flags = CLK_IGNORE_UNUSED,
+ },
+ .lock = __SPIN_LOCK_UNLOCKED(hfpll1.lock),
+};
+
+static struct hfpll_data hfpll2_data = {
+ .mode_reg = 0x3280,
+ .l_reg = 0x3288,
+ .m_reg = 0x328c,
+ .n_reg = 0x3290,
+ .config_reg = 0x3284,
+ .status_reg = 0x329c,
+ .config_val = 0x7845c665,
+ .droop_reg = 0x3294,
+ .droop_val = 0x0108c000,
+ .min_rate = 600000000UL,
+ .max_rate = 1800000000UL,
+};
+
+static struct clk_hfpll hfpll2 = {
+ .d = &hfpll2_data,
+ .clkr.hw.init = &(struct clk_init_data){
+ .parent_names = (const char *[]){ "pxo" },
+ .num_parents = 1,
+ .name = "hfpll2",
+ .ops = &clk_ops_hfpll,
+ .flags = CLK_IGNORE_UNUSED,
+ },
+ .lock = __SPIN_LOCK_UNLOCKED(hfpll2.lock),
+};
+
+static struct hfpll_data hfpll3_data = {
+ .mode_reg = 0x32c0,
+ .l_reg = 0x32c8,
+ .m_reg = 0x32cc,
+ .n_reg = 0x32d0,
+ .config_reg = 0x32c4,
+ .status_reg = 0x32dc,
+ .config_val = 0x7845c665,
+ .droop_reg = 0x32d4,
+ .droop_val = 0x0108c000,
+ .min_rate = 600000000UL,
+ .max_rate = 1800000000UL,
+};
+
+static struct clk_hfpll hfpll3 = {
+ .d = &hfpll3_data,
+ .clkr.hw.init = &(struct clk_init_data){
+ .parent_names = (const char *[]){ "pxo" },
+ .num_parents = 1,
+ .name = "hfpll3",
+ .ops = &clk_ops_hfpll,
+ .flags = CLK_IGNORE_UNUSED,
+ },
+ .lock = __SPIN_LOCK_UNLOCKED(hfpll3.lock),
+};
+
+static struct hfpll_data hfpll_l2_8064_data = {
+ .mode_reg = 0x3300,
+ .l_reg = 0x3308,
+ .m_reg = 0x330c,
+ .n_reg = 0x3310,
+ .config_reg = 0x3304,
+ .status_reg = 0x331c,
+ .config_val = 0x7845c665,
+ .droop_reg = 0x3314,
+ .droop_val = 0x0108c000,
+ .min_rate = 600000000UL,
+ .max_rate = 1800000000UL,
+};
+
+static struct hfpll_data hfpll_l2_data = {
+ .mode_reg = 0x3400,
+ .l_reg = 0x3408,
+ .m_reg = 0x340c,
+ .n_reg = 0x3410,
+ .config_reg = 0x3404,
+ .status_reg = 0x341c,
+ .config_val = 0x7845c665,
+ .droop_reg = 0x3414,
+ .droop_val = 0x0108c000,
+ .min_rate = 600000000UL,
+ .max_rate = 1800000000UL,
+};
+
+static struct clk_hfpll hfpll_l2 = {
+ .d = &hfpll_l2_data,
+ .clkr.hw.init = &(struct clk_init_data){
+ .parent_names = (const char *[]){ "pxo" },
+ .num_parents = 1,
+ .name = "hfpll_l2",
+ .ops = &clk_ops_hfpll,
+ .flags = CLK_IGNORE_UNUSED,
+ },
+ .lock = __SPIN_LOCK_UNLOCKED(hfpll_l2.lock),
+};
+
static struct clk_pll pll14 = {
.l_reg = 0x31c4,
.m_reg = 0x31c8,
@@ -3140,6 +3299,9 @@ static struct clk_regmap *gcc_msm8960_clks[] = {
[PMIC_ARB1_H_CLK] = &pmic_arb1_h_clk.clkr,
[PMIC_SSBI2_CLK] = &pmic_ssbi2_clk.clkr,
[RPM_MSG_RAM_H_CLK] = &rpm_msg_ram_h_clk.clkr,
+ [PLL9] = &hfpll0.clkr,
+ [PLL10] = &hfpll1.clkr,
+ [PLL12] = &hfpll_l2.clkr,
};
static const struct qcom_reset_map gcc_msm8960_resets[] = {
@@ -3350,6 +3512,11 @@ static struct clk_regmap *gcc_apq8064_clks[] = {
[PMIC_ARB1_H_CLK] = &pmic_arb1_h_clk.clkr,
[PMIC_SSBI2_CLK] = &pmic_ssbi2_clk.clkr,
[RPM_MSG_RAM_H_CLK] = &rpm_msg_ram_h_clk.clkr,
+ [PLL9] = &hfpll0.clkr,
+ [PLL10] = &hfpll1.clkr,
+ [PLL12] = &hfpll_l2.clkr,
+ [PLL16] = &hfpll2.clkr,
+ [PLL17] = &hfpll3.clkr,
};
static const struct qcom_reset_map gcc_apq8064_resets[] = {
@@ -3496,6 +3663,11 @@ static int gcc_msm8960_probe(struct platform_device *pdev)
if (!match)
return -EINVAL;
+ if (match->data == &gcc_apq8064_desc) {
+ hfpll1.d = &hfpll1_8064_data;
+ hfpll_l2.d = &hfpll_l2_8064_data;
+ }
+
/* Temporary until RPM clocks supported */
clk = clk_register_fixed_rate(dev, "cxo", NULL, CLK_IS_ROOT, 19200000);
if (IS_ERR(clk))
diff --git a/include/dt-bindings/clock/qcom,gcc-msm8960.h b/include/dt-bindings/clock/qcom,gcc-msm8960.h
index 7d20eedfee98..e02742fc81cc 100644
--- a/include/dt-bindings/clock/qcom,gcc-msm8960.h
+++ b/include/dt-bindings/clock/qcom,gcc-msm8960.h
@@ -319,5 +319,7 @@
#define CE3_SRC 303
#define CE3_CORE_CLK 304
#define CE3_H_CLK 305
+#define PLL16 306
+#define PLL17 307
#endif
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by The Linux Foundation
next prev parent reply other threads:[~2014-09-05 22:47 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-09-05 22:47 [PATCH v2 00/15] Krait clocks + Krait CPUfreq Stephen Boyd
2014-09-05 22:47 ` [PATCH v2 01/15] clk: mux: Add unregistration API Stephen Boyd
2014-09-05 22:47 ` [PATCH v2 02/15] clk: mux: Split out register accessors for reuse Stephen Boyd
2014-09-05 22:47 ` [PATCH v2 03/15] clk: Add __clk_mux_determine_rate_closest Stephen Boyd
2014-09-05 22:47 ` [PATCH v2 04/15] clk: divider: Make generic for usage elsewhere Stephen Boyd
2014-10-03 18:07 ` Stephen Boyd
2014-10-07 17:27 ` Srinivas Kandagatla
2014-10-07 18:26 ` Stephen Boyd
2014-10-07 19:28 ` Srinivas Kandagatla
2014-10-08 15:04 ` Srinivas Kandagatla
2014-09-05 22:47 ` Stephen Boyd
2014-09-05 22:47 ` [PATCH v2 05/15] clk: Add safe switch hook Stephen Boyd
2014-09-05 22:47 ` [PATCH v2 06/15] clk: Avoid sending high rates to downstream clocks during set_rate Stephen Boyd
2014-09-05 22:47 ` [PATCH v2 07/15] clk: qcom: Add support for High-Frequency PLLs (HFPLLs) Stephen Boyd
2014-09-05 22:47 ` [PATCH v2 08/15] clk: qcom: Add HFPLL driver Stephen Boyd
2014-09-05 22:47 ` Stephen Boyd [this message]
2014-09-05 22:47 ` [PATCH v2 10/15] clk: qcom: Add IPQ806X's HFPLLs Stephen Boyd
2014-09-05 22:47 ` [PATCH v2 11/15] clk: qcom: Add support for Krait clocks Stephen Boyd
2014-09-05 22:47 ` [PATCH v2 12/15] clk: qcom: Add KPSS ACC/GCC driver Stephen Boyd
2014-09-05 22:47 ` [PATCH v2 13/15] clk: qcom: Add Krait clock controller driver Stephen Boyd
2014-09-05 22:47 ` [PATCH v2 14/15] cpufreq: Add module to register cpufreq on Krait CPUs Stephen Boyd
2014-09-08 4:46 ` Viresh Kumar
2014-09-08 17:15 ` Christopher Covington
2014-09-09 0:37 ` Stephen Boyd
2014-09-09 4:53 ` Viresh Kumar
2014-09-05 22:47 ` Stephen Boyd
2014-09-05 22:47 ` [PATCH v2 15/15] ARM: dts: qcom: Add necessary DT data for Krait cpufreq Stephen Boyd
2014-09-08 9:42 ` [PATCH v2 00/15] Krait clocks + Krait CPUfreq Pramod Gurav
2014-09-08 11:59 ` Pramod Gurav
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1409957256-23729-11-git-send-email-sboyd@codeaurora.org \
--to=sboyd@codeaurora.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).