linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Dave Martin <Dave.Martin@arm.com>
To: kvmarm@lists.cs.columbia.edu
Cc: "Peter Maydell" <peter.maydell@linaro.org>,
	"Okamoto Takayuki" <tokamoto@jp.fujitsu.com>,
	"Christoffer Dall" <cdall@kernel.org>,
	"Ard Biesheuvel" <ard.biesheuvel@linaro.org>,
	"Marc Zyngier" <marc.zyngier@arm.com>,
	"Catalin Marinas" <catalin.marinas@arm.com>,
	"Will Deacon" <will.deacon@arm.com>,
	"Alex Bennée" <alex.bennee@linaro.org>,
	linux-arm-kernel@lists.infradead.org
Subject: [RFC PATCH v3 13/24] KVM: arm64/sve: Context switch the SVE registers
Date: Tue, 11 Dec 2018 23:28:50 +0000	[thread overview]
Message-ID: <1544570941-7377-14-git-send-email-Dave.Martin@arm.com> (raw)
In-Reply-To: <1544570941-7377-1-git-send-email-Dave.Martin@arm.com>

In order to give each vcpu its own view of the SVE registers, this
patch adds context storage via a new sve_state pointer in struct
vcpu_arch.  An additional member sve_max_vl is also added for each
vcpu, to determine the maximum vector length visible to the guest
and thus the value to be configured in ZCR_EL2.LEN while the is
active.  This also determines the layout and size of the storage in
sve_state, which is read and written by the same backend functions
that are used for context-switching the SVE state for host tasks.

On SVE-enabled vcpus, SVE access traps are now handled by switching
in the vcpu's SVE context and disabling the trap before returning
to the guest.  On other vcpus, the trap is not handled and an exit
back to the host occurs, where the handle_sve() fallback path
reflects an undefined instruction exception back to the guest,
consistently with the behaviour of non-SVE-capable hardware (as was
done unconditionally prior to this patch).

No SVE handling is added on non-VHE-only paths, since VHE is an
architectural and Kconfig prerequisite of SVE.

Signed-off-by: Dave Martin <Dave.Martin@arm.com>

---

Changes since RFC v2:

 * Remove pointless return value from __hyp_switch_fpsimd().

   This function cannot fail, so it may as well return void.

 * Roll __hyp_trap_is_fpsimd() and __hyp_switch_fpsimd() together into
   a single __hyp_handle_fpsimd().  Splitting these served no real
   purpose.
---
 arch/arm64/include/asm/kvm_host.h |  6 ++++
 arch/arm64/kvm/fpsimd.c           |  5 +--
 arch/arm64/kvm/hyp/switch.c       | 71 ++++++++++++++++++++++++++++++---------
 3 files changed, 65 insertions(+), 17 deletions(-)

diff --git a/arch/arm64/include/asm/kvm_host.h b/arch/arm64/include/asm/kvm_host.h
index 35aabaf..f36cfc0 100644
--- a/arch/arm64/include/asm/kvm_host.h
+++ b/arch/arm64/include/asm/kvm_host.h
@@ -212,6 +212,8 @@ typedef struct kvm_cpu_context kvm_cpu_context_t;
 
 struct kvm_vcpu_arch {
 	struct kvm_cpu_context ctxt;
+	void *sve_state;
+	unsigned int sve_max_vl;
 
 	/* HYP configuration */
 	u64 hcr_el2;
@@ -304,6 +306,10 @@ struct kvm_vcpu_arch {
 	bool sysregs_loaded_on_cpu;
 };
 
+/* Pointer to the vcpu's SVE FFR for sve_{save,load}_state() */
+#define vcpu_sve_pffr(vcpu) ((void *)((char *)((vcpu)->arch.sve_state) + \
+				      sve_ffr_offset((vcpu)->arch.sve_max_vl)))
+
 /* vcpu_arch flags field values: */
 #define KVM_ARM64_DEBUG_DIRTY		(1 << 0)
 #define KVM_ARM64_FP_ENABLED		(1 << 1) /* guest FP regs loaded */
diff --git a/arch/arm64/kvm/fpsimd.c b/arch/arm64/kvm/fpsimd.c
index 887c9d7..40f49e2 100644
--- a/arch/arm64/kvm/fpsimd.c
+++ b/arch/arm64/kvm/fpsimd.c
@@ -86,10 +86,11 @@ void kvm_arch_vcpu_ctxsync_fp(struct kvm_vcpu *vcpu)
 
 	if (vcpu->arch.flags & KVM_ARM64_FP_ENABLED) {
 		fpsimd_bind_state_to_cpu(&vcpu->arch.ctxt.gp_regs.fp_regs,
-					 NULL, sve_max_vl);
+					 vcpu->arch.sve_state,
+					 vcpu->arch.sve_max_vl);
 
 		clear_thread_flag(TIF_FOREIGN_FPSTATE);
-		clear_thread_flag(TIF_SVE);
+		update_thread_flag(TIF_SVE, vcpu_has_sve(vcpu));
 	}
 }
 
diff --git a/arch/arm64/kvm/hyp/switch.c b/arch/arm64/kvm/hyp/switch.c
index 815a34f..14abc8a 100644
--- a/arch/arm64/kvm/hyp/switch.c
+++ b/arch/arm64/kvm/hyp/switch.c
@@ -98,7 +98,10 @@ static void activate_traps_vhe(struct kvm_vcpu *vcpu)
 	val = read_sysreg(cpacr_el1);
 	val |= CPACR_EL1_TTA;
 	val &= ~CPACR_EL1_ZEN;
-	if (!update_fp_enabled(vcpu)) {
+	if (update_fp_enabled(vcpu)) {
+		if (vcpu_has_sve(vcpu))
+			val |= CPACR_EL1_ZEN;
+	} else {
 		val &= ~CPACR_EL1_FPEN;
 		__activate_traps_fpsimd32(vcpu);
 	}
@@ -332,26 +335,60 @@ static bool __hyp_text __skip_instr(struct kvm_vcpu *vcpu)
 	}
 }
 
-static bool __hyp_text __hyp_switch_fpsimd(struct kvm_vcpu *vcpu)
+/*
+ * if () with a gating check for SVE support to minimise branch
+ * mispredictions in non-SVE systems.
+ * (system_supports_sve() is resolved at build time or via a static key.)
+ */
+#define if_sve(cond) if (system_supports_sve() && (cond))
+
+/* Check for an FPSIMD/SVE trap and handle as appropriate */
+static bool __hyp_text __hyp_handle_fpsimd(struct kvm_vcpu *vcpu)
 {
-	struct user_fpsimd_state *host_fpsimd = vcpu->arch.host_fpsimd_state;
+	u8 trap_class;
+	bool guest_has_sve;
 
-	if (has_vhe())
-		write_sysreg(read_sysreg(cpacr_el1) | CPACR_EL1_FPEN,
-			     cpacr_el1);
-	else
+	if (!system_supports_fpsimd())
+		return false;
+
+	trap_class = kvm_vcpu_trap_get_class(vcpu);
+
+	if (trap_class == ESR_ELx_EC_FP_ASIMD)
+		goto handle;
+
+	guest_has_sve = vcpu_has_sve(vcpu);
+
+	if_sve (guest_has_sve && trap_class == ESR_ELx_EC_SVE)
+		goto handle;
+
+	return false;
+
+handle:
+	/* The trap is an FPSIMD/SVE trap: switch the context */
+
+	if (has_vhe()) {
+		u64 reg = read_sysreg(cpacr_el1) | CPACR_EL1_FPEN;
+
+		if_sve (guest_has_sve)
+			reg |= CPACR_EL1_ZEN;
+
+		write_sysreg(reg, cpacr_el1);
+	} else {
 		write_sysreg(read_sysreg(cptr_el2) & ~(u64)CPTR_EL2_TFP,
 			     cptr_el2);
+	}
 
 	isb();
 
 	if (vcpu->arch.flags & KVM_ARM64_FP_HOST) {
+		struct user_fpsimd_state *host_fpsimd =
+			vcpu->arch.host_fpsimd_state;
+
 		/*
 		 * In the SVE case, VHE is assumed: it is enforced by
 		 * Kconfig and kvm_arch_init().
 		 */
-		if (system_supports_sve() &&
-		    (vcpu->arch.flags & KVM_ARM64_HOST_SVE_IN_USE)) {
+		if_sve (vcpu->arch.flags & KVM_ARM64_HOST_SVE_IN_USE) {
 			struct thread_struct *thread = container_of(
 				host_fpsimd,
 				struct thread_struct, uw.fpsimd_state);
@@ -364,10 +401,14 @@ static bool __hyp_text __hyp_switch_fpsimd(struct kvm_vcpu *vcpu)
 		vcpu->arch.flags &= ~KVM_ARM64_FP_HOST;
 	}
 
-	__fpsimd_restore_state(&vcpu->arch.ctxt.gp_regs.fp_regs);
-
-	if (vcpu_has_sve(vcpu))
+	if_sve (guest_has_sve) {
+		sve_load_state(vcpu_sve_pffr(vcpu),
+			       &vcpu->arch.ctxt.gp_regs.fp_regs.fpsr,
+			       sve_vq_from_vl(vcpu->arch.sve_max_vl) - 1);
 		write_sysreg_s(vcpu->arch.ctxt.sys_regs[ZCR_EL1], SYS_ZCR_EL12);
+	} else {
+		__fpsimd_restore_state(&vcpu->arch.ctxt.gp_regs.fp_regs);
+	}
 
 	/* Skip restoring fpexc32 for AArch64 guests */
 	if (!(read_sysreg(hcr_el2) & HCR_RW))
@@ -403,10 +444,10 @@ static bool __hyp_text fixup_guest_exit(struct kvm_vcpu *vcpu, u64 *exit_code)
 	 * and restore the guest context lazily.
 	 * If FP/SIMD is not implemented, handle the trap and inject an
 	 * undefined instruction exception to the guest.
+	 * Similarly for trapped SVE accesses.
 	 */
-	if (system_supports_fpsimd() &&
-	    kvm_vcpu_trap_get_class(vcpu) == ESR_ELx_EC_FP_ASIMD)
-		return __hyp_switch_fpsimd(vcpu);
+	if (__hyp_handle_fpsimd(vcpu))
+		return true;
 
 	if (!__populate_fault_info(vcpu))
 		return true;
-- 
2.1.4


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2018-12-11 23:34 UTC|newest]

Thread overview: 25+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-12-11 23:28 [RFC PATCH v3 00/24] KVM: arm64: SVE guest support Dave Martin
2018-12-11 23:28 ` [RFC PATCH v3 01/24] arm64: fpsimd: Always set TIF_FOREIGN_FPSTATE on task state flush Dave Martin
2018-12-11 23:28 ` [RFC PATCH v3 02/24] KVM: arm64: Delete orphaned declaration for __fpsimd_enabled() Dave Martin
2018-12-11 23:28 ` [RFC PATCH v3 03/24] KVM: arm64: Refactor kvm_arm_num_regs() for easier maintenance Dave Martin
2018-12-11 23:28 ` [RFC PATCH v3 04/24] KVM: arm64: Add missing #include of <linux/bitmap.h> to kvm_host.h Dave Martin
2018-12-11 23:28 ` [RFC PATCH v3 05/24] arm64/sve: Check SVE virtualisability Dave Martin
2018-12-11 23:28 ` [RFC PATCH v3 06/24] arm64/sve: Clarify role of the VQ map maintenance functions Dave Martin
2018-12-11 23:28 ` [RFC PATCH v3 07/24] arm64/sve: Enable SVE state tracking for non-task contexts Dave Martin
2018-12-11 23:28 ` [RFC PATCH v3 08/24] KVM: arm64: Add a vcpu flag to control SVE visibility for the guest Dave Martin
2018-12-11 23:28 ` [RFC PATCH v3 09/24] KVM: arm64: Propagate vcpu into read_id_reg() Dave Martin
2018-12-11 23:28 ` [RFC PATCH v3 10/24] KVM: arm64: Extend reset_unknown() to handle mixed RES0/UNKNOWN registers Dave Martin
2018-12-11 23:28 ` [RFC PATCH v3 11/24] KVM: arm64: Support runtime sysreg filtering for KVM_GET_REG_LIST Dave Martin
2018-12-11 23:28 ` [RFC PATCH v3 12/24] KVM: arm64/sve: System register context switch and access support Dave Martin
2018-12-11 23:28 ` Dave Martin [this message]
2018-12-11 23:28 ` [RFC PATCH v3 14/24] KVM: Allow 2048-bit register access via ioctl interface Dave Martin
2018-12-11 23:28 ` [RFC PATCH v3 15/24] KVM: arm64: Reject ioctl access to FPSIMD V-regs on SVE vcpus Dave Martin
2018-12-11 23:28 ` [RFC PATCH v3 16/24] KVM: arm64/sve: Add SVE support to register access ioctl interface Dave Martin
2018-12-11 23:28 ` [RFC PATCH v3 17/24] KVM: arm64: Enumerate SVE register indices for KVM_GET_REG_LIST Dave Martin
2018-12-11 23:28 ` [RFC PATCH v3 18/24] arm64/sve: In-kernel vector length availability query interface Dave Martin
2018-12-11 23:28 ` [RFC PATCH v3 19/24] KVM: arm: Move detection of invalid VM type bits to generic code Dave Martin
2018-12-11 23:28 ` [RFC PATCH v3 20/24] KVM: arm: Add support for early vcpu configuration ioctls Dave Martin
2018-12-11 23:28 ` [RFC PATCH v3 21/24] KVM: arm64/sve: Report and enable SVE API extensions for userspace Dave Martin
2018-12-11 23:28 ` [RFC PATCH v3 22/24] KVM: arm64/sve: allow KVM_ARM_SVE_CONFIG_QUERY on vm fd Dave Martin
2018-12-11 23:29 ` [RFC PATCH v3 23/24] KVM: Documentation: Document arm64 core registers in detail Dave Martin
2018-12-11 23:29 ` [RFC PATCH v3 24/24] KVM: arm64/sve: Document KVM API extensions for SVE Dave Martin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1544570941-7377-14-git-send-email-Dave.Martin@arm.com \
    --to=dave.martin@arm.com \
    --cc=alex.bennee@linaro.org \
    --cc=ard.biesheuvel@linaro.org \
    --cc=catalin.marinas@arm.com \
    --cc=cdall@kernel.org \
    --cc=kvmarm@lists.cs.columbia.edu \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=marc.zyngier@arm.com \
    --cc=peter.maydell@linaro.org \
    --cc=tokamoto@jp.fujitsu.com \
    --cc=will.deacon@arm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).