From: Aisheng Dong <aisheng.dong@nxp.com>
To: "linux-arm-kernel@lists.infradead.org"
<linux-arm-kernel@lists.infradead.org>
Cc: Aisheng Dong <aisheng.dong@nxp.com>,
Mark Rutland <mark.rutland@arm.com>,
"dongas86@gmail.com" <dongas86@gmail.com>,
"devicetree@vger.kernel.org" <devicetree@vger.kernel.org>,
"catalin.marinas@arm.com" <catalin.marinas@arm.com>,
"will.deacon@arm.com" <will.deacon@arm.com>,
"robh+dt@kernel.org" <robh+dt@kernel.org>,
dl-linux-imx <linux-imx@nxp.com>,
"kernel@pengutronix.de" <kernel@pengutronix.de>,
Fabio Estevam <fabio.estevam@nxp.com>,
"shawnguo@kernel.org" <shawnguo@kernel.org>
Subject: [PATCH V6 3/4] arm64: dts: imx: add imx8qxp mek support
Date: Fri, 11 Jan 2019 11:37:33 +0000 [thread overview]
Message-ID: <1547206279-26169-4-git-send-email-aisheng.dong@nxp.com> (raw)
In-Reply-To: <1547206279-26169-1-git-send-email-aisheng.dong@nxp.com>
i.MX 8QuadXPlus is a quad (4x) Cortex-A35 proccessor with powerful
graphic and multimedia features. This patch adds imx8qxp mek board
support.
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: devicetree@vger.kernel.org
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
---
v5->v6:
* no changes
v4->v5:
* change the dts compiling to depend on ARCH_MXC instead of SOC_IMX8QXP
v3->v4:
* remove un-documented enet phy properties
v2->v3:
* Pad names update
* move memory node to here
* add no-sd and no-sdio under emmc node
---
arch/arm64/boot/dts/freescale/Makefile | 1 +
arch/arm64/boot/dts/freescale/imx8qxp-mek.dts | 137 ++++++++++++++++++++++++++
2 files changed, 138 insertions(+)
create mode 100644 arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
index f9be242..0db6e37 100644
--- a/arch/arm64/boot/dts/freescale/Makefile
+++ b/arch/arm64/boot/dts/freescale/Makefile
@@ -20,3 +20,4 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-qds.dtb
dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-rdb.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mq-evk.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8qxp-mek.dtb
diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts b/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
new file mode 100644
index 0000000..03aad66
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
@@ -0,0 +1,137 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2017~2018 NXP
+ */
+
+/dts-v1/;
+
+#include "imx8qxp.dtsi"
+
+/ {
+ model = "Freescale i.MX8QXP MEK";
+ compatible = "fsl,imx8qxp-mek", "fsl,imx8qxp";
+
+ chosen {
+ stdout-path = &adma_lpuart0;
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x00000000 0x80000000 0 0x40000000>;
+ };
+
+ reg_usdhc2_vmmc: usdhc2-vmmc {
+ compatible = "regulator-fixed";
+ regulator-name = "SD1_SPWR";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ gpio = <&lsio_gpio4 19 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+};
+
+&adma_lpuart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lpuart0>;
+ status = "okay";
+};
+
+&fec1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_fec1>;
+ phy-mode = "rgmii-id";
+ phy-handle = <ðphy0>;
+ fsl,magic-packet;
+ status = "okay";
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethphy0: ethernet-phy@0 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <0>;
+ };
+
+ ethphy1: ethernet-phy@1 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <1>;
+ };
+ };
+};
+
+&usdhc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc1>;
+ bus-width = <8>;
+ no-sd;
+ no-sdio;
+ non-removable;
+ status = "okay";
+};
+
+&usdhc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc2>;
+ bus-width = <4>;
+ vmmc-supply = <®_usdhc2_vmmc>;
+ cd-gpios = <&lsio_gpio4 22 GPIO_ACTIVE_LOW>;
+ wp-gpios = <&lsio_gpio4 21 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl_fec1: fec1grp {
+ fsl,pins = <
+ IMX8QXP_ENET0_MDC_CONN_ENET0_MDC 0x06000020
+ IMX8QXP_ENET0_MDIO_CONN_ENET0_MDIO 0x06000020
+ IMX8QXP_ENET0_RGMII_TX_CTL_CONN_ENET0_RGMII_TX_CTL 0x06000020
+ IMX8QXP_ENET0_RGMII_TXC_CONN_ENET0_RGMII_TXC 0x06000020
+ IMX8QXP_ENET0_RGMII_TXD0_CONN_ENET0_RGMII_TXD0 0x06000020
+ IMX8QXP_ENET0_RGMII_TXD1_CONN_ENET0_RGMII_TXD1 0x06000020
+ IMX8QXP_ENET0_RGMII_TXD2_CONN_ENET0_RGMII_TXD2 0x06000020
+ IMX8QXP_ENET0_RGMII_TXD3_CONN_ENET0_RGMII_TXD3 0x06000020
+ IMX8QXP_ENET0_RGMII_RXC_CONN_ENET0_RGMII_RXC 0x06000020
+ IMX8QXP_ENET0_RGMII_RX_CTL_CONN_ENET0_RGMII_RX_CTL 0x06000020
+ IMX8QXP_ENET0_RGMII_RXD0_CONN_ENET0_RGMII_RXD0 0x06000020
+ IMX8QXP_ENET0_RGMII_RXD1_CONN_ENET0_RGMII_RXD1 0x06000020
+ IMX8QXP_ENET0_RGMII_RXD2_CONN_ENET0_RGMII_RXD2 0x06000020
+ IMX8QXP_ENET0_RGMII_RXD3_CONN_ENET0_RGMII_RXD3 0x06000020
+ >;
+ };
+
+ pinctrl_lpuart0: lpuart0grp {
+ fsl,pins = <
+ IMX8QXP_UART0_RX_ADMA_UART0_RX 0x06000020
+ IMX8QXP_UART0_TX_ADMA_UART0_TX 0x06000020
+ >;
+ };
+
+ pinctrl_usdhc1: usdhc1grp {
+ fsl,pins = <
+ IMX8QXP_EMMC0_CLK_CONN_EMMC0_CLK 0x06000041
+ IMX8QXP_EMMC0_CMD_CONN_EMMC0_CMD 0x00000021
+ IMX8QXP_EMMC0_DATA0_CONN_EMMC0_DATA0 0x00000021
+ IMX8QXP_EMMC0_DATA1_CONN_EMMC0_DATA1 0x00000021
+ IMX8QXP_EMMC0_DATA2_CONN_EMMC0_DATA2 0x00000021
+ IMX8QXP_EMMC0_DATA3_CONN_EMMC0_DATA3 0x00000021
+ IMX8QXP_EMMC0_DATA4_CONN_EMMC0_DATA4 0x00000021
+ IMX8QXP_EMMC0_DATA5_CONN_EMMC0_DATA5 0x00000021
+ IMX8QXP_EMMC0_DATA6_CONN_EMMC0_DATA6 0x00000021
+ IMX8QXP_EMMC0_DATA7_CONN_EMMC0_DATA7 0x00000021
+ IMX8QXP_EMMC0_STROBE_CONN_EMMC0_STROBE 0x00000041
+ >;
+ };
+
+ pinctrl_usdhc2: usdhc2grp {
+ fsl,pins = <
+ IMX8QXP_USDHC1_CLK_CONN_USDHC1_CLK 0x06000041
+ IMX8QXP_USDHC1_CMD_CONN_USDHC1_CMD 0x00000021
+ IMX8QXP_USDHC1_DATA0_CONN_USDHC1_DATA0 0x00000021
+ IMX8QXP_USDHC1_DATA1_CONN_USDHC1_DATA1 0x00000021
+ IMX8QXP_USDHC1_DATA2_CONN_USDHC1_DATA2 0x00000021
+ IMX8QXP_USDHC1_DATA3_CONN_USDHC1_DATA3 0x00000021
+ IMX8QXP_USDHC1_VSELECT_CONN_USDHC1_VSELECT 0x00000021
+ >;
+ };
+};
--
2.7.4
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2019-01-11 11:38 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-01-11 11:37 [PATCH V6 0/4] arm64: imx: add imx8qxp support Aisheng Dong
2019-01-11 11:37 ` [PATCH V6 1/4] dt-bindings: arm: imx: add imx8qxp mek support Aisheng Dong
2019-01-14 1:19 ` Shawn Guo
2019-01-11 11:37 ` [PATCH V6 2/4] arm64: dts: imx: add imx8qxp support Aisheng Dong
2019-01-14 1:21 ` Shawn Guo
2019-01-11 11:37 ` Aisheng Dong [this message]
2019-01-14 1:21 ` [PATCH V6 3/4] arm64: dts: imx: add imx8qxp mek support Shawn Guo
2019-01-11 11:37 ` [PATCH V6 4/4] defconfig: arm64: add imx8qxp support Aisheng Dong
2019-01-14 1:22 ` Shawn Guo
2019-01-14 3:24 ` Aisheng Dong
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1547206279-26169-4-git-send-email-aisheng.dong@nxp.com \
--to=aisheng.dong@nxp.com \
--cc=catalin.marinas@arm.com \
--cc=devicetree@vger.kernel.org \
--cc=dongas86@gmail.com \
--cc=fabio.estevam@nxp.com \
--cc=kernel@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=mark.rutland@arm.com \
--cc=robh+dt@kernel.org \
--cc=shawnguo@kernel.org \
--cc=will.deacon@arm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).