linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Claudiu Beznea <claudiu.beznea@microchip.com>
To: <nicolas.ferre@microchip.com>, <sre@kernel.org>,
	<alexandre.belloni@bootlin.com>
Cc: Claudiu Beznea <claudiu.beznea@microchip.com>,
	linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org, linux-pm@vger.kernel.org
Subject: [PATCH v2 1/2] power: reset: at91-poweroff: introduce struct shdwc_reg_config
Date: Fri, 20 Dec 2019 17:31:17 +0200	[thread overview]
Message-ID: <1576855878-13213-2-git-send-email-claudiu.beznea@microchip.com> (raw)
In-Reply-To: <1576855878-13213-1-git-send-email-claudiu.beznea@microchip.com>

This driver uses AT91_PMC_MCKR in poweroff() function. But the
SAM9X60's PMC versions maps AT91_PMC_MCKR functionality at different
offset compared to the SAMA5D2's one. This patch prepares the field
so that different AT91_PMC_MCKR's offsets to be introduced in
struct reg_config so that proper offset to be used for AT91_PMC_MCKR
based on compatible string.

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
---
 drivers/power/reset/at91-sama5d2_shdwc.c | 54 +++++++++++++++++++-------------
 1 file changed, 32 insertions(+), 22 deletions(-)

diff --git a/drivers/power/reset/at91-sama5d2_shdwc.c b/drivers/power/reset/at91-sama5d2_shdwc.c
index 1c18f465a245..84806d20846b 100644
--- a/drivers/power/reset/at91-sama5d2_shdwc.c
+++ b/drivers/power/reset/at91-sama5d2_shdwc.c
@@ -66,7 +66,7 @@
 
 #define SHDW_CFG_NOT_USED	(32)
 
-struct shdwc_config {
+struct shdwc_reg_config {
 	u8 wkup_pin_input;
 	u8 mr_rtcwk_shift;
 	u8 mr_rttwk_shift;
@@ -74,8 +74,12 @@ struct shdwc_config {
 	u8 sr_rttwk_shift;
 };
 
+struct reg_config {
+	struct shdwc_reg_config shdwc;
+};
+
 struct shdwc {
-	const struct shdwc_config *cfg;
+	const struct reg_config *rcfg;
 	struct clk *sclk;
 	void __iomem *shdwc_base;
 	void __iomem *mpddrc_base;
@@ -95,6 +99,7 @@ static const unsigned long long sdwc_dbc_period[] = {
 static void __init at91_wakeup_status(struct platform_device *pdev)
 {
 	struct shdwc *shdw = platform_get_drvdata(pdev);
+	const struct reg_config *rcfg = shdw->rcfg;
 	u32 reg;
 	char *reason = "unknown";
 
@@ -106,11 +111,11 @@ static void __init at91_wakeup_status(struct platform_device *pdev)
 	if (!reg)
 		return;
 
-	if (SHDW_WK_PIN(reg, shdw->cfg))
+	if (SHDW_WK_PIN(reg, &rcfg->shdwc))
 		reason = "WKUP pin";
-	else if (SHDW_RTCWK(reg, shdw->cfg))
+	else if (SHDW_RTCWK(reg, &rcfg->shdwc))
 		reason = "RTC";
-	else if (SHDW_RTTWK(reg, shdw->cfg))
+	else if (SHDW_RTTWK(reg, &rcfg->shdwc))
 		reason = "RTT";
 
 	pr_info("AT91: Wake-Up source: %s\n", reason);
@@ -215,6 +220,7 @@ static u32 at91_shdwc_get_wakeup_input(struct platform_device *pdev,
 static void at91_shdwc_dt_configure(struct platform_device *pdev)
 {
 	struct shdwc *shdw = platform_get_drvdata(pdev);
+	const struct reg_config *rcfg = shdw->rcfg;
 	struct device_node *np = pdev->dev.of_node;
 	u32 mode = 0, tmp, input;
 
@@ -227,10 +233,10 @@ static void at91_shdwc_dt_configure(struct platform_device *pdev)
 		mode |= AT91_SHDW_WKUPDBC(at91_shdwc_debouncer_value(pdev, tmp));
 
 	if (of_property_read_bool(np, "atmel,wakeup-rtc-timer"))
-		mode |= SHDW_RTCWKEN(shdw->cfg);
+		mode |= SHDW_RTCWKEN(&rcfg->shdwc);
 
 	if (of_property_read_bool(np, "atmel,wakeup-rtt-timer"))
-		mode |= SHDW_RTTWKEN(shdw->cfg);
+		mode |= SHDW_RTTWKEN(&rcfg->shdwc);
 
 	dev_dbg(&pdev->dev, "%s: mode = %#x\n", __func__, mode);
 	writel(mode, shdw->shdwc_base + AT91_SHDW_MR);
@@ -239,30 +245,34 @@ static void at91_shdwc_dt_configure(struct platform_device *pdev)
 	writel(input, shdw->shdwc_base + AT91_SHDW_WUIR);
 }
 
-static const struct shdwc_config sama5d2_shdwc_config = {
-	.wkup_pin_input = 0,
-	.mr_rtcwk_shift = 17,
-	.mr_rttwk_shift	= SHDW_CFG_NOT_USED,
-	.sr_rtcwk_shift = 5,
-	.sr_rttwk_shift = SHDW_CFG_NOT_USED,
+static const struct reg_config sama5d2_reg_config = {
+	.shdwc = {
+		.wkup_pin_input = 0,
+		.mr_rtcwk_shift = 17,
+		.mr_rttwk_shift	= SHDW_CFG_NOT_USED,
+		.sr_rtcwk_shift = 5,
+		.sr_rttwk_shift = SHDW_CFG_NOT_USED,
+	},
 };
 
-static const struct shdwc_config sam9x60_shdwc_config = {
-	.wkup_pin_input = 0,
-	.mr_rtcwk_shift = 17,
-	.mr_rttwk_shift = 16,
-	.sr_rtcwk_shift = 5,
-	.sr_rttwk_shift = 4,
+static const struct reg_config sam9x60_reg_config = {
+	.shdwc = {
+		.wkup_pin_input = 0,
+		.mr_rtcwk_shift = 17,
+		.mr_rttwk_shift = 16,
+		.sr_rtcwk_shift = 5,
+		.sr_rttwk_shift = 4,
+	},
 };
 
 static const struct of_device_id at91_shdwc_of_match[] = {
 	{
 		.compatible = "atmel,sama5d2-shdwc",
-		.data = &sama5d2_shdwc_config,
+		.data = &sama5d2_reg_config,
 	},
 	{
 		.compatible = "microchip,sam9x60-shdwc",
-		.data = &sam9x60_shdwc_config,
+		.data = &sam9x60_reg_config,
 	}, {
 		/*sentinel*/
 	}
@@ -303,7 +313,7 @@ static int __init at91_shdwc_probe(struct platform_device *pdev)
 	}
 
 	match = of_match_node(at91_shdwc_of_match, pdev->dev.of_node);
-	at91_shdwc->cfg = match->data;
+	at91_shdwc->rcfg = match->data;
 
 	at91_shdwc->sclk = devm_clk_get(&pdev->dev, NULL);
 	if (IS_ERR(at91_shdwc->sclk))
-- 
2.7.4


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  reply	other threads:[~2019-12-20 15:32 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-12-20 15:31 [PATCH v2 0/2] at91-sama5d2_shdwc shutdown controller Claudiu Beznea
2019-12-20 15:31 ` Claudiu Beznea [this message]
2019-12-20 15:42   ` [PATCH v2 1/2] power: reset: at91-poweroff: introduce struct shdwc_reg_config Nicolas.Ferre
2019-12-20 15:31 ` [PATCH v2 2/2] power: reset: at91-poweroff: use proper master clock register offset Claudiu Beznea
2019-12-20 15:42   ` Nicolas.Ferre
2020-01-14 10:34 ` [PATCH v2 0/2] at91-sama5d2_shdwc shutdown controller Claudiu.Beznea
2020-01-15 20:52   ` Sebastian Reichel

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1576855878-13213-2-git-send-email-claudiu.beznea@microchip.com \
    --to=claudiu.beznea@microchip.com \
    --cc=alexandre.belloni@bootlin.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=nicolas.ferre@microchip.com \
    --cc=sre@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).