From: Jolly Shah <jolly.shah@xilinx.com>
To: ard.biesheuvel@linaro.org, mingo@kernel.org,
gregkh@linuxfoundation.org, matt@codeblueprint.co.uk,
sudeep.holla@arm.com, hkallweit1@gmail.com,
keescook@chromium.org, dmitry.torokhov@gmail.com,
michal.simek@xilinx.com
Cc: Rajan Vaja <rajan.vaja@xilinx.com>,
rajanv@xilinx.com, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
Jolly Shah <jollys@xilinx.com>
Subject: [PATCH v2 4/4] firmware: xilinx: Add sysfs and IOCTL to set boot health status
Date: Wed, 8 Jan 2020 15:54:23 -0800 [thread overview]
Message-ID: <1578527663-10243-5-git-send-email-jolly.shah@xilinx.com> (raw)
In-Reply-To: <1578527663-10243-1-git-send-email-jolly.shah@xilinx.com>
From: Rajan Vaja <rajan.vaja@xilinx.com>
Add sysfs interface to set boot health status from user space.
Add IOCTL ID used by this interface to communicate with firmware.
If PMUFW is compiled with CHECK_HEALTHY_BOOT, it will check the
healthy bit on FPD WDT expiration. If healthy bit is set by a user
application running in Linux, PMUFW will do APU only restart. If
healthy bit is not set during FPD WDT expiration, PMUFW will do
system restart.
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Jolly Shah <jollys@xilinx.com>
---
Changes in v2:
- Updated Linux kernel version in documentation.
- Used DEVICE_ATTR_* and ATTRIBUTE_GROUPS macros.
- Updated Signed-off-by sequence.
---
Documentation/ABI/stable/sysfs-firmware-zynqmp | 21 +++++++++++++
drivers/firmware/xilinx/zynqmp.c | 41 ++++++++++++++++++++++++++
include/linux/firmware/xlnx-zynqmp.h | 2 ++
3 files changed, 64 insertions(+)
diff --git a/Documentation/ABI/stable/sysfs-firmware-zynqmp b/Documentation/ABI/stable/sysfs-firmware-zynqmp
index f41e9c5..3f44a3c 100644
--- a/Documentation/ABI/stable/sysfs-firmware-zynqmp
+++ b/Documentation/ABI/stable/sysfs-firmware-zynqmp
@@ -80,3 +80,24 @@ Description:
# echo "subsystem" > /sys/firmware/zynqmp/shutdown_scope
Users: Xilinx
+
+What: /sys/firmware/zynqmp/health_status
+Date: April 2018
+KernelVersion: 5.5
+Contact: "Rajan Vaja" <rajanv@xilinx.com>
+Description:
+ This sysfs interface allows to set the health status. If PMUFW
+ is compiled with CHECK_HEALTHY_BOOT, it will check the healthy
+ bit on FPD WDT expiration. If healthy bit is set by a user
+ application running in Linux, PMUFW will do APU only restart. If
+ healthy bit is not set during FPD WDT expiration, PMUFW will do
+ system restart.
+
+ Usage:
+ Set healthy bit
+ # echo 1 > /sys/firmware/zynqmp/health_status
+
+ Unset healthy bit
+ # echo 0 > /sys/firmware/zynqmp/health_status
+
+Users: Xilinx
diff --git a/drivers/firmware/xilinx/zynqmp.c b/drivers/firmware/xilinx/zynqmp.c
index ef7d107..2a77c90 100644
--- a/drivers/firmware/xilinx/zynqmp.c
+++ b/drivers/firmware/xilinx/zynqmp.c
@@ -477,6 +477,7 @@ static inline int zynqmp_is_valid_ioctl(u32 ioctl_id)
case IOCTL_READ_GGS:
case IOCTL_WRITE_PGGS:
case IOCTL_READ_PGGS:
+ case IOCTL_SET_BOOT_HEALTH_STATUS:
return 1;
default:
return 0;
@@ -861,8 +862,48 @@ static ssize_t shutdown_scope_store(struct device *device,
static DEVICE_ATTR_RW(shutdown_scope);
+/**
+ * health_status_store - Store health_status sysfs attribute
+ * @device: Device structure
+ * @attr: Device attribute structure
+ * @buf: User entered health_status attribute string
+ * @count: Buffer size
+ *
+ * User-space interface for setting the boot health status.
+ * Usage: echo <value> > /sys/firmware/zynqmp/health_status
+ *
+ * Value:
+ * 1 - Set healthy bit to 1
+ * 0 - Unset healthy bit
+ *
+ * Return: count argument if request succeeds, the corresponding error
+ * code otherwise
+ */
+static ssize_t health_status_store(struct device *device,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ int ret;
+ unsigned int value;
+
+ ret = kstrtouint(buf, 10, &value);
+ if (ret)
+ return ret;
+
+ ret = zynqmp_pm_ioctl(0, IOCTL_SET_BOOT_HEALTH_STATUS, value, 0, NULL);
+ if (ret) {
+ pr_err("unable to set healthy bit value to %u\n", value);
+ return ret;
+ }
+
+ return count;
+}
+
+static DEVICE_ATTR_WO(health_status);
+
static struct attribute *zynqmp_attrs[] = {
&dev_attr_shutdown_scope.attr,
+ &dev_attr_health_status.attr,
NULL,
};
diff --git a/include/linux/firmware/xlnx-zynqmp.h b/include/linux/firmware/xlnx-zynqmp.h
index e4f83c6..0554054 100644
--- a/include/linux/firmware/xlnx-zynqmp.h
+++ b/include/linux/firmware/xlnx-zynqmp.h
@@ -106,6 +106,8 @@ enum pm_ioctl_id {
IOCTL_READ_GGS,
IOCTL_WRITE_PGGS,
IOCTL_READ_PGGS,
+ /* Set healthy bit value */
+ IOCTL_SET_BOOT_HEALTH_STATUS = 17,
};
enum pm_query_id {
--
2.7.4
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
prev parent reply other threads:[~2020-01-08 23:56 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-01-08 23:54 [PATCH v2 0/4] firmware: xilinx: Add xilinx specific sysfs interface Jolly Shah
2020-01-08 23:54 ` [PATCH v2 1/4] firmware: xilinx: Add " Jolly Shah
2020-01-14 14:52 ` Greg KH
2020-01-23 23:47 ` Jolly Shah
2020-01-24 6:03 ` Greg KH
2020-01-24 11:32 ` Sudeep Holla
2020-01-27 22:46 ` Jolly Shah
2020-01-27 23:01 ` Jolly Shah
2020-01-28 6:28 ` Greg KH
2020-01-30 23:59 ` Jolly Shah
2020-01-31 6:10 ` Greg KH
2020-01-31 9:05 ` Rajan Vaja
2020-01-31 9:36 ` 'Greg KH'
2020-02-11 0:57 ` Jolly Shah
2020-02-14 17:10 ` 'Greg KH'
2020-02-15 0:37 ` Jolly Shah
2020-02-15 0:52 ` 'Greg KH'
2020-02-19 22:50 ` Jolly Shah
2020-03-06 23:55 ` Jolly Shah
2020-03-07 8:47 ` 'Greg KH'
2020-01-08 23:54 ` [PATCH v2 2/4] firmware: xilinx: Add system shutdown API interface Jolly Shah
2020-01-08 23:54 ` [PATCH v2 3/4] firmware: xilinx: Add sysfs to set shutdown scope Jolly Shah
2020-01-08 23:54 ` Jolly Shah [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1578527663-10243-5-git-send-email-jolly.shah@xilinx.com \
--to=jolly.shah@xilinx.com \
--cc=ard.biesheuvel@linaro.org \
--cc=dmitry.torokhov@gmail.com \
--cc=gregkh@linuxfoundation.org \
--cc=hkallweit1@gmail.com \
--cc=jollys@xilinx.com \
--cc=keescook@chromium.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=matt@codeblueprint.co.uk \
--cc=michal.simek@xilinx.com \
--cc=mingo@kernel.org \
--cc=rajan.vaja@xilinx.com \
--cc=rajanv@xilinx.com \
--cc=sudeep.holla@arm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).