linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Ulf Hansson <ulf.hansson@linaro.org>
To: "Rafael J . Wysocki" <rjw@rjwysocki.net>,
	Sudeep Holla <sudeep.holla@arm.com>,
	Lorenzo Pieralisi <Lorenzo.Pieralisi@arm.com>,
	Mark Rutland <mark.rutland@arm.com>,
	Daniel Lezcano <daniel.lezcano@linaro.org>,
	linux-pm@vger.kernel.org
Cc: Ulf Hansson <ulf.hansson@linaro.org>,
	Vincent Guittot <vincent.guittot@linaro.org>,
	Geert Uytterhoeven <geert+renesas@glider.be>,
	Kevin Hilman <khilman@kernel.org>,
	Stephen Boyd <sboyd@kernel.org>,
	Viresh Kumar <viresh.kumar@linaro.org>,
	linux-kernel@vger.kernel.org, Lina Iyer <ilina@codeaurora.org>,
	Tony Lindgren <tony@atomide.com>,
	linux-arm-msm@vger.kernel.org,
	"Raju P . L . S . S . S . N" <rplsssn@codeaurora.org>,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH v10 02/27] PM / Domains: Add support for CPU devices to genpd
Date: Thu, 29 Nov 2018 18:46:35 +0100	[thread overview]
Message-ID: <20181129174700.16585-3-ulf.hansson@linaro.org> (raw)
In-Reply-To: <20181129174700.16585-1-ulf.hansson@linaro.org>

To enable a device belonging to a CPU to be attached to a PM domain managed
by genpd, let's do a few changes to it, as to make it convenient to manage
the specifics around CPUs.

To be able to quickly find out what CPUs that are attached to a genpd,
which typically becomes useful from a genpd governor as following changes
is about to show, let's add a cpumask to the struct generic_pm_domain. At
the point when a CPU device gets attached to a genpd, let's update its
cpumask. Moreover, let's also propagate changes to the cpumask upwards in
the topology to the master PM domains. In this way, the cpumask for a genpd
hierarchically reflects all CPUs attached to the topology below it.

Finally, let's make this an opt-in feature, to avoid having to manage CPUs
and the cpumask for a genpd that doesn't need it. For that reason, let's
add a new genpd configuration bit, GENPD_FLAG_CPU_DOMAIN.

Cc: Lina Iyer <ilina@codeaurora.org>
Co-developed-by: Lina Iyer <lina.iyer@linaro.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
---

Changes in v10:
	- Don't allocate the cpumask when not used.
	- Simplify the code that updates the cpumask.
	- Document the GENPD_FLAG_CPU_DOMAIN.

---
 drivers/base/power/domain.c | 66 ++++++++++++++++++++++++++++++++++++-
 include/linux/pm_domain.h   | 13 ++++++++
 2 files changed, 78 insertions(+), 1 deletion(-)

diff --git a/drivers/base/power/domain.c b/drivers/base/power/domain.c
index e27b91d36a2a..c3ff8e395308 100644
--- a/drivers/base/power/domain.c
+++ b/drivers/base/power/domain.c
@@ -20,6 +20,7 @@
 #include <linux/sched.h>
 #include <linux/suspend.h>
 #include <linux/export.h>
+#include <linux/cpu.h>
 
 #include "power.h"
 
@@ -126,6 +127,7 @@ static const struct genpd_lock_ops genpd_spin_ops = {
 #define genpd_is_irq_safe(genpd)	(genpd->flags & GENPD_FLAG_IRQ_SAFE)
 #define genpd_is_always_on(genpd)	(genpd->flags & GENPD_FLAG_ALWAYS_ON)
 #define genpd_is_active_wakeup(genpd)	(genpd->flags & GENPD_FLAG_ACTIVE_WAKEUP)
+#define genpd_is_cpu_domain(genpd)	(genpd->flags & GENPD_FLAG_CPU_DOMAIN)
 
 static inline bool irq_safe_dev_in_no_sleep_domain(struct device *dev,
 		const struct generic_pm_domain *genpd)
@@ -1377,6 +1379,56 @@ static void genpd_free_dev_data(struct device *dev,
 	dev_pm_put_subsys_data(dev);
 }
 
+static void __genpd_update_cpumask(struct generic_pm_domain *genpd,
+				   int cpu, bool set, unsigned int depth)
+{
+	struct gpd_link *link;
+
+	if (!genpd_is_cpu_domain(genpd))
+		return;
+
+	list_for_each_entry(link, &genpd->slave_links, slave_node) {
+		struct generic_pm_domain *master = link->master;
+
+		genpd_lock_nested(master, depth + 1);
+		__genpd_update_cpumask(master, cpu, set, depth + 1);
+		genpd_unlock(master);
+	}
+
+	if (set)
+		cpumask_set_cpu(cpu, genpd->cpus);
+	else
+		cpumask_clear_cpu(cpu, genpd->cpus);
+}
+
+static void genpd_update_cpumask(struct generic_pm_domain *genpd,
+				 struct device *dev, bool set)
+{
+	int cpu;
+
+	if (!genpd_is_cpu_domain(genpd))
+		return;
+
+	for_each_possible_cpu(cpu) {
+		if (get_cpu_device(cpu) == dev) {
+			__genpd_update_cpumask(genpd, cpu, set, 0);
+			return;
+		}
+	}
+}
+
+static void genpd_set_cpumask(struct generic_pm_domain *genpd,
+			      struct device *dev)
+{
+	genpd_update_cpumask(genpd, dev, true);
+}
+
+static void genpd_clear_cpumask(struct generic_pm_domain *genpd,
+				struct device *dev)
+{
+	genpd_update_cpumask(genpd, dev, false);
+}
+
 static int genpd_add_device(struct generic_pm_domain *genpd, struct device *dev,
 			    struct gpd_timing_data *td)
 {
@@ -1398,6 +1450,8 @@ static int genpd_add_device(struct generic_pm_domain *genpd, struct device *dev,
 	if (ret)
 		goto out;
 
+	genpd_set_cpumask(genpd, dev);
+
 	dev_pm_domain_set(dev, &genpd->domain);
 
 	genpd->device_count++;
@@ -1459,6 +1513,7 @@ static int genpd_remove_device(struct generic_pm_domain *genpd,
 	if (genpd->detach_dev)
 		genpd->detach_dev(genpd, dev);
 
+	genpd_clear_cpumask(genpd, dev);
 	dev_pm_domain_set(dev, NULL);
 
 	list_del_init(&pdd->list_node);
@@ -1686,11 +1741,18 @@ int pm_genpd_init(struct generic_pm_domain *genpd,
 	if (genpd_is_always_on(genpd) && !genpd_status_on(genpd))
 		return -EINVAL;
 
+	if (genpd_is_cpu_domain(genpd) &&
+	    !zalloc_cpumask_var(&genpd->cpus, GFP_KERNEL))
+		return -ENOMEM;
+
 	/* Use only one "off" state if there were no states declared */
 	if (genpd->state_count == 0) {
 		ret = genpd_set_default_power_state(genpd);
-		if (ret)
+		if (ret) {
+			if (genpd_is_cpu_domain(genpd))
+				free_cpumask_var(genpd->cpus);
 			return ret;
+		}
 	} else if (!gov) {
 		pr_warn("%s : no governor for states\n", genpd->name);
 	}
@@ -1736,6 +1798,8 @@ static int genpd_remove(struct generic_pm_domain *genpd)
 	list_del(&genpd->gpd_list_node);
 	genpd_unlock(genpd);
 	cancel_work_sync(&genpd->power_off_work);
+	if (genpd_is_cpu_domain(genpd))
+		free_cpumask_var(genpd->cpus);
 	if (genpd->free_state) {
 		kfree(genpd->states);
 		genpd->states = NULL;
diff --git a/include/linux/pm_domain.h b/include/linux/pm_domain.h
index f9e09bd4152c..5a4673605d22 100644
--- a/include/linux/pm_domain.h
+++ b/include/linux/pm_domain.h
@@ -16,6 +16,7 @@
 #include <linux/of.h>
 #include <linux/notifier.h>
 #include <linux/spinlock.h>
+#include <linux/cpumask.h>
 
 /*
  * Flags to control the behaviour of a genpd.
@@ -42,11 +43,22 @@
  * GENPD_FLAG_ACTIVE_WAKEUP:	Instructs genpd to keep the PM domain powered
  *				on, in case any of its attached devices is used
  *				in the wakeup path to serve system wakeups.
+ *
+ * GENPD_FLAG_CPU_DOMAIN:	Instructs genpd that it should expect to get
+ *				devices attached, which may belong to CPUs or
+ *				possibly have subdomains with CPUs attached.
+ *				This flag enables the genpd backend driver to
+ *				deploy idle power management support for CPUs
+ *				and groups of CPUs. Note that, the backend
+ *				driver must then comply with the so called,
+ *				last-man-standing algorithm, for the CPUs in the
+ *				PM domain.
  */
 #define GENPD_FLAG_PM_CLK	 (1U << 0)
 #define GENPD_FLAG_IRQ_SAFE	 (1U << 1)
 #define GENPD_FLAG_ALWAYS_ON	 (1U << 2)
 #define GENPD_FLAG_ACTIVE_WAKEUP (1U << 3)
+#define GENPD_FLAG_CPU_DOMAIN	 (1U << 4)
 
 enum gpd_status {
 	GPD_STATE_ACTIVE = 0,	/* PM domain is active */
@@ -93,6 +105,7 @@ struct generic_pm_domain {
 	unsigned int suspended_count;	/* System suspend device counter */
 	unsigned int prepared_count;	/* Suspend counter of prepared devices */
 	unsigned int performance_state;	/* Aggregated max performance state */
+	cpumask_var_t cpus;		/* A cpumask of the attached CPUs */
 	int (*power_off)(struct generic_pm_domain *domain);
 	int (*power_on)(struct generic_pm_domain *domain);
 	unsigned int (*opp_to_performance_state)(struct generic_pm_domain *genpd,
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2018-11-29 17:48 UTC|newest]

Thread overview: 73+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-11-29 17:46 [PATCH v10 00/27] PM / Domains: Support hierarchical CPU arrangement (PSCI/ARM) Ulf Hansson
2018-11-29 17:46 ` [PATCH v10 01/27] PM / Domains: Add generic data pointer to genpd_power_state struct Ulf Hansson
2018-12-18 10:39   ` Daniel Lezcano
2018-12-18 11:53     ` Ulf Hansson
2019-01-11 10:52       ` Rafael J. Wysocki
2018-11-29 17:46 ` Ulf Hansson [this message]
2018-12-19  9:53   ` [PATCH v10 02/27] PM / Domains: Add support for CPU devices to genpd Daniel Lezcano
2018-12-19 10:02     ` Ulf Hansson
2019-01-11 10:54       ` Rafael J. Wysocki
2018-11-29 17:46 ` [PATCH v10 03/27] timer: Export next wakeup time of a CPU Ulf Hansson
2019-01-11 11:06   ` Rafael J. Wysocki
2019-01-16  7:57     ` Ulf Hansson
2019-01-16 10:59       ` Rafael J. Wysocki
2019-01-16 12:00         ` Ulf Hansson
2019-01-25 10:04           ` Ulf Hansson
2019-01-25 10:18             ` Rafael J. Wysocki
2018-11-29 17:46 ` [PATCH v10 04/27] PM / Domains: Add genpd governor for CPUs Ulf Hansson
2018-12-19  9:54   ` Daniel Lezcano
2018-12-19 10:09     ` Ulf Hansson
2018-11-29 17:46 ` [PATCH v10 05/27] dt: psci: Update DT bindings to support hierarchical PSCI states Ulf Hansson
2018-11-29 17:46 ` [PATCH v10 06/27] of: base: Add of_get_cpu_state_node() to get idle states for a CPU node Ulf Hansson
2018-12-19 11:05   ` Daniel Lezcano
2018-11-29 17:46 ` [PATCH v10 07/27] cpuidle: dt: Support hierarchical CPU idle states Ulf Hansson
2018-12-19 11:20   ` Daniel Lezcano
2018-11-29 17:46 ` [PATCH v10 08/27] ARM/ARM64: cpuidle: Let back-end init ops take the driver as input Ulf Hansson
2018-11-29 17:46 ` [PATCH v10 09/27] drivers: firmware: psci: Move psci to separate directory Ulf Hansson
2018-11-29 17:46 ` [PATCH v10 10/27] MAINTAINERS: Update files for PSCI Ulf Hansson
2018-11-29 17:46 ` [PATCH v10 11/27] drivers: firmware: psci: Split psci_dt_cpu_init_idle() Ulf Hansson
2018-11-29 17:46 ` [PATCH v10 12/27] drivers: firmware: psci: Simplify state node parsing Ulf Hansson
2018-11-29 17:46 ` [PATCH v10 13/27] drivers: firmware: psci: Support hierarchical CPU idle states Ulf Hansson
2018-12-19 12:11   ` Daniel Lezcano
2018-12-19 12:53     ` Ulf Hansson
2018-11-29 17:46 ` [PATCH v10 14/27] drivers: firmware: psci: Simplify error path of psci_dt_init() Ulf Hansson
2018-12-19 12:08   ` Daniel Lezcano
2018-11-29 17:46 ` [PATCH v10 15/27] drivers: firmware: psci: Announce support for OS initiated suspend mode Ulf Hansson
2018-12-20 13:11   ` Daniel Lezcano
2018-11-29 17:46 ` [PATCH v10 16/27] drivers: firmware: psci: Prepare to use " Ulf Hansson
2018-12-20 14:08   ` Daniel Lezcano
2018-12-20 15:41     ` Ulf Hansson
2018-12-20 17:16       ` Daniel Lezcano
2018-11-29 17:46 ` [PATCH v10 17/27] drivers: firmware: psci: Prepare to support PM domains Ulf Hansson
2018-12-20 14:19   ` Daniel Lezcano
2018-12-20 15:49     ` Ulf Hansson
2018-12-20 18:06       ` Daniel Lezcano
2018-12-20 21:37         ` Ulf Hansson
2018-12-21  7:15           ` Daniel Lezcano
2018-11-29 17:46 ` [PATCH v10 18/27] drivers: firmware: psci: Add support for PM domains using genpd Ulf Hansson
2018-12-03 16:37   ` Lina Iyer
2018-12-03 20:03     ` Ulf Hansson
2018-12-20 14:35   ` Daniel Lezcano
2018-12-20 21:09     ` Ulf Hansson
2018-11-29 17:46 ` [PATCH v10 19/27] drivers: firmware: psci: Add hierarchical domain idle states converter Ulf Hansson
2018-11-29 17:46 ` [PATCH v10 20/27] drivers: firmware: psci: Introduce psci_dt_topology_init() Ulf Hansson
2018-11-29 17:46 ` [PATCH v10 21/27] drivers: firmware: psci: Add a helper to attach a CPU to its PM domain Ulf Hansson
2018-12-04 18:45   ` Lina Iyer
2018-12-06  9:15     ` Ulf Hansson
2018-11-29 17:46 ` [PATCH v10 22/27] drivers: firmware: psci: Attach the CPU's device " Ulf Hansson
2018-11-29 17:46 ` [PATCH v10 23/27] drivers: firmware: psci: Manage runtime PM in the idle path for CPUs Ulf Hansson
2018-11-29 17:46 ` [PATCH v10 24/27] drivers: firmware: psci: Support CPU hotplug for the hierarchical model Ulf Hansson
2018-11-29 22:31   ` Lina Iyer
2018-11-30  8:25     ` Ulf Hansson
2018-11-30 20:57       ` Lina Iyer
2018-12-19 11:17   ` Lorenzo Pieralisi
2018-12-19 11:47     ` Ulf Hansson
2018-11-29 17:46 ` [PATCH v10 25/27] arm64: kernel: Respect the hierarchical CPU topology in DT for PSCI Ulf Hansson
2018-11-29 17:46 ` [PATCH v10 26/27] arm64: dts: Convert to the hierarchical CPU topology layout for MSM8916 Ulf Hansson
2018-11-29 17:47 ` [PATCH v10 27/27] arm64: dts: hikey: Convert to the hierarchical CPU topology layout Ulf Hansson
2018-12-17 16:12 ` [PATCH v10 00/27] PM / Domains: Support hierarchical CPU arrangement (PSCI/ARM) Ulf Hansson
2019-01-11 11:08   ` Rafael J. Wysocki
2019-01-03 12:06 ` Sudeep Holla
2019-01-16  9:10   ` Ulf Hansson
2019-01-17 17:44     ` Sudeep Holla
2019-01-18 11:56       ` Ulf Hansson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20181129174700.16585-3-ulf.hansson@linaro.org \
    --to=ulf.hansson@linaro.org \
    --cc=Lorenzo.Pieralisi@arm.com \
    --cc=daniel.lezcano@linaro.org \
    --cc=geert+renesas@glider.be \
    --cc=ilina@codeaurora.org \
    --cc=khilman@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=rjw@rjwysocki.net \
    --cc=rplsssn@codeaurora.org \
    --cc=sboyd@kernel.org \
    --cc=sudeep.holla@arm.com \
    --cc=tony@atomide.com \
    --cc=vincent.guittot@linaro.org \
    --cc=viresh.kumar@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).