From: Miquel Raynal <miquel.raynal@bootlin.com>
To: Kishon Vijay Abraham I <kishon@ti.com>,
Gregory Clement <gregory.clement@bootlin.com>,
Jason Cooper <jason@lakedaemon.net>, Andrew Lunn <andrew@lunn.ch>,
Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>,
Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Mathias Nyman <mathias.nyman@intel.com>,
Alan Stern <stern@rowland.harvard.edu>
Cc: devicetree@vger.kernel.org,
Antoine Tenart <antoine.tenart@bootlin.com>,
linux-usb@vger.kernel.org,
Maxime Chevallier <maxime.chevallier@bootlin.com>,
Nadav Haklai <nadavh@marvell.com>,
Thomas Petazzoni <thomas.petazzoni@bootlin.com>,
Miquel Raynal <miquel.raynal@bootlin.com>,
Ofer Heifetz <oferh@marvell.com>,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 02/10] usb: host: xhci: mvebu: add reset on resume quirk
Date: Fri, 11 Jan 2019 14:31:25 +0100 [thread overview]
Message-ID: <20190111133133.24803-3-miquel.raynal@bootlin.com> (raw)
In-Reply-To: <20190111133133.24803-1-miquel.raynal@bootlin.com>
From: Ofer Heifetz <oferh@marvell.com>
The mvebu xHCI host driver does not have suspend/resume support. Use of
the XHCI_RESET_ON_RESUME quirk is mandatory in order to avoid failures
after resume. This will work only if no USB device is plugged-in.
While at it, mention in the Kconfig file that this IP is also present
on the A3700 SoC.
Signed-off-by: Ofer Heifetz <oferh@marvell.com>
[miquel.raynal@bootlin.com: Reword the commit message]
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
---
drivers/usb/host/Kconfig | 4 ++--
drivers/usb/host/xhci-mvebu.c | 11 +++++++++++
drivers/usb/host/xhci-mvebu.h | 6 ++++++
drivers/usb/host/xhci-plat.c | 7 +++++++
4 files changed, 26 insertions(+), 2 deletions(-)
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index 16758b12a5e9..13d59be6a6aa 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -69,13 +69,13 @@ config USB_XHCI_MTK
If unsure, say N.
config USB_XHCI_MVEBU
- tristate "xHCI support for Marvell Armada 375/38x"
+ tristate "xHCI support for Marvell Armada 375/38x/3700"
select USB_XHCI_PLATFORM
depends on HAS_IOMEM
depends on ARCH_MVEBU || COMPILE_TEST
---help---
Say 'Y' to enable the support for the xHCI host controller
- found in Marvell Armada 375/38x ARM SOCs.
+ found in Marvell Armada 375/38x/3700 ARM SOCs.
config USB_XHCI_RCAR
tristate "xHCI support for Renesas R-Car SoCs"
diff --git a/drivers/usb/host/xhci-mvebu.c b/drivers/usb/host/xhci-mvebu.c
index 32e158568788..60651a50770f 100644
--- a/drivers/usb/host/xhci-mvebu.c
+++ b/drivers/usb/host/xhci-mvebu.c
@@ -13,6 +13,7 @@
#include <linux/usb/hcd.h>
#include "xhci-mvebu.h"
+#include "xhci.h"
#define USB3_MAX_WINDOWS 4
#define USB3_WIN_CTRL(w) (0x0 + ((w) * 8))
@@ -72,3 +73,13 @@ int xhci_mvebu_mbus_init_quirk(struct usb_hcd *hcd)
return 0;
}
+
+int xhci_mvebu_a3700_init_quirk(struct usb_hcd *hcd)
+{
+ struct xhci_hcd *xhci = hcd_to_xhci(hcd);
+
+ /* Without reset on resume, the HC won't work at all */
+ xhci->quirks |= XHCI_RESET_ON_RESUME;
+
+ return 0;
+}
diff --git a/drivers/usb/host/xhci-mvebu.h b/drivers/usb/host/xhci-mvebu.h
index 09791df2cec0..ca0a3a5721dd 100644
--- a/drivers/usb/host/xhci-mvebu.h
+++ b/drivers/usb/host/xhci-mvebu.h
@@ -12,10 +12,16 @@ struct usb_hcd;
#if IS_ENABLED(CONFIG_USB_XHCI_MVEBU)
int xhci_mvebu_mbus_init_quirk(struct usb_hcd *hcd);
+int xhci_mvebu_a3700_init_quirk(struct usb_hcd *hcd);
#else
static inline int xhci_mvebu_mbus_init_quirk(struct usb_hcd *hcd)
{
return 0;
}
+
+static inline int xhci_mvebu_a3700_init_quirk(struct usb_hcd *hcd)
+{
+ return 0;
+}
#endif
#endif /* __LINUX_XHCI_MVEBU_H */
diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c
index ef09cb06212f..0ac4ec975547 100644
--- a/drivers/usb/host/xhci-plat.c
+++ b/drivers/usb/host/xhci-plat.c
@@ -98,6 +98,10 @@ static const struct xhci_plat_priv xhci_plat_marvell_armada = {
.init_quirk = xhci_mvebu_mbus_init_quirk,
};
+static const struct xhci_plat_priv xhci_plat_marvell_armada3700 = {
+ .init_quirk = xhci_mvebu_a3700_init_quirk,
+};
+
static const struct xhci_plat_priv xhci_plat_renesas_rcar_gen2 = {
.firmware_name = XHCI_RCAR_FIRMWARE_NAME_V1,
.init_quirk = xhci_rcar_init_quirk,
@@ -123,6 +127,9 @@ static const struct of_device_id usb_xhci_of_match[] = {
}, {
.compatible = "marvell,armada-380-xhci",
.data = &xhci_plat_marvell_armada,
+ }, {
+ .compatible = "marvell,armada3700-xhci",
+ .data = &xhci_plat_marvell_armada3700,
}, {
.compatible = "renesas,xhci-r8a7790",
.data = &xhci_plat_renesas_rcar_gen2,
--
2.19.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2019-01-11 13:31 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-01-11 13:31 [PATCH v2 00/10] A3700 USB S2RAM support Miquel Raynal
2019-01-11 13:31 ` [PATCH v2 01/10] usb: core: comply to PHY framework Miquel Raynal
2019-01-11 13:31 ` Miquel Raynal [this message]
2019-01-18 16:04 ` [PATCH v2 02/10] usb: host: xhci: mvebu: add reset on resume quirk Gregory CLEMENT
2019-01-21 10:54 ` Miquel Raynal
2019-01-11 13:31 ` [PATCH v2 03/10] usb: ehci-orion: avoid double PHY initialization Miquel Raynal
2019-01-11 18:03 ` Sergei Shtylyov
2019-01-21 10:00 ` Miquel Raynal
2019-01-18 16:25 ` Gregory CLEMENT
2019-01-21 9:55 ` Miquel Raynal
2019-01-11 13:31 ` [PATCH v2 04/10] usb: ehci-orion: add S2RAM support Miquel Raynal
2019-01-11 13:31 ` [PATCH v2 05/10] phy: add A3700 UTMI PHY driver Miquel Raynal
2019-01-15 2:40 ` Chunfeng Yun
2019-01-16 9:20 ` Kishon Vijay Abraham I
2019-01-21 10:37 ` Miquel Raynal
2019-01-18 16:36 ` Gregory CLEMENT
2019-01-21 10:24 ` Miquel Raynal
2019-01-11 13:31 ` [PATCH v2 06/10] dt-bindings: phy: mvebu-utmi: add UTMI PHY bindings Miquel Raynal
2019-01-15 21:44 ` Rob Herring
2019-01-16 13:20 ` Miquel Raynal
2019-01-16 21:05 ` Rob Herring
2019-01-11 13:31 ` [PATCH v2 07/10] MAINTAINERS: phy: fill Armada 3700 PHY drivers entry Miquel Raynal
2019-01-11 13:31 ` [PATCH v2 08/10] ARM64: dts: marvell: armada-37xx: fix USB2 memory region Miquel Raynal
2019-01-11 13:31 ` [PATCH v2 09/10] ARM64: dts: marvell: armada-37xx: declare USB2 UTMI PHYs Miquel Raynal
2019-01-11 13:31 ` [PATCH v2 10/10] ARM64: dts: marvell: armada-37xx: link USB hosts with their PHYs Miquel Raynal
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190111133133.24803-3-miquel.raynal@bootlin.com \
--to=miquel.raynal@bootlin.com \
--cc=andrew@lunn.ch \
--cc=antoine.tenart@bootlin.com \
--cc=devicetree@vger.kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=gregory.clement@bootlin.com \
--cc=jason@lakedaemon.net \
--cc=kishon@ti.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-usb@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=mathias.nyman@intel.com \
--cc=maxime.chevallier@bootlin.com \
--cc=nadavh@marvell.com \
--cc=oferh@marvell.com \
--cc=robh+dt@kernel.org \
--cc=sebastian.hesselbarth@gmail.com \
--cc=stern@rowland.harvard.edu \
--cc=thomas.petazzoni@bootlin.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).